Equip CEE 7/7 (SCHUKO) to C13 Power Cable Instruction Manual

1. Produttu Finituview

This manual provides essential information for the safe and proper use of your Equip CEE 7/7 (SCHUKO) to C13 Power Cable. This cable is designed to connect electronic devices requiring a C13 power input to a standard CEE 7/7 (SCHUKO) wall outlet.

Figure 1: Equip CEE 7/7 (SCHUKO) to C13 Power Cable. The image shows the male CEE 7/7 (Schuko) plug with two round pins and grounding clips, and the female C13 connector, commonly used for computers and monitors.

Funzioni chjave:

• C13 socket x 1
• 1 x Schuko (CEE 7/7) plug
• Conductor: 0.75 mm² (24/0.19 mm)
• Lunghezza di u cable: 1.1 m

2. Istruzzioni di sicurità

Please read and understand these safety instructions before using the power cable. Failure to follow these instructions may result in electric shock, fire, or damage to equipment.

• Ùn aduprate micca u cavu s'ellu hè dannighjatu, sfilacciatu o hà fili scoperti.
• Assicuratevi chì u voltage and current ratings of the connected device are compatible with the power supply and cable.
• Ùn sovraccaricate e prese elettriche.
• Keep the cable away from water, heat sources, and sharp objects.
• Do not attempt to modify or repair the cable. Contact qualified personnel for assistance.
• Always grasp the plug, not the cable, when disconnecting from an outlet or device.

3. Setup è Connection

Follow these steps to properly connect your device using the Equip power cable:

1. Inspeccione u Cable: Before connecting, visually inspect the power cable for any signs of damage, such as cuts, abrasions, or bent pins. Do not use a damaged cable.
2. Cunnette vi à u dispusitivu: Insert the C13 connector (female end) firmly into the corresponding C14 inlet on your electronic device (e.g., computer, monitor, printer). Ensure a snug fit.
3. Cunnette à a presa di corrente: Insert the CEE 7/7 (SCHUKO) plug (male end) into a standard, grounded CEE 7/7 wall power outlet. Ensure the plug is fully inserted.
4. Power On: Once both ends are securely connected, you may power on your device.

Figure 2: C13 Connector. This image shows the C13 female connector, which plugs into the C14 inlet of electronic devices.

4. Operating Instructions

This power cable is designed for simple plug-and-play operation. Once connected as described in the "Setup and Connection" section, it provides power to your device.

• Ensure the cable is not kinked, pinched, or run under heavy objects that could damage it.
• Avoid pulling on the cable to disconnect it. Always use the molded plug to remove it from the outlet or device.
• Do not use the cable in wet or damp cundizioni.

5. Mantenimentu è Cura

Proper maintenance ensures the longevity and safe operation of your power cable.

• Pulizia: Disconnect the cable from all power sources before cleaning. Wipe the cable and plugs with a dry, soft cloth. Do not use liquid cleaners or solvents.
• Conservazione: When not in use, coil the cable loosely. Avoid tight coiling or bending, which can damage the internal wires. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Ispezione: Periodically inspect the cable for any signs of wear, damage, or discoloration. Replace the cable immediately if any damage is observed.

6. Risoluzione di prublemi

If you encounter issues with your power cable, refer to the following common troubleshooting steps:

Sè i passi di risoluzione di i prublemi ùn risolvenu micca u prublema, smette di usà lu è cuntattate l'assistenza clienti.

7. Specificazioni

8. Garanzia è Support

For warranty information or technical support, please refer to the official Equip websitu o cuntattate u vostru rivenditore. Cunservate a vostra ricevuta di compra cum'è prova di compra.

Produttore: Digital Data Communications

Marca: Equipà

Informazioni di cuntattu: Per piacè visitate u Equip official websitu per supportu è dettagli di cuntattu.