Manuale d'usu di l'ossimetru di pulsu à punta di u ditu Innovo Deluxe i900AP

1. Produttu Finituview

The Innovo Deluxe Fingertip Pulse Oximeter is designed to provide accurate measurements of blood oxygen saturation (SpO2) and pulse rate (PR) at your fingertip. This device is equipped with advanced features such as a Plethysmograph and Perfusion Index (PI) to enhance the reliability of readings, especially in conditions of low blood perfusion. Its compact and user-friendly design makes it suitable for sports enthusiasts, aviators, and home use.

Image: Innovo Deluxe iP900AP Fingertip Pulse Oximeter, showing the device with its display on, indicating SpO2 and pulse rate.

Funzioni chjave:

• Precisu è affidabile: Improved LED and sensor for SpO2 and pulse rate measurement even at low blood perfusion.
• Plethysmograph and Perfusion Index (PI): Features that ensure accurate readings and inform you of pulse strength. A PI value less than 0.2% indicates potential issues like cold hands or improper positioning.
• Upgraded Hardware and Software: Includes auditory alarm, pulse detection beeps, and adjustable display brightness.
• Uso versatile: Ideal for climbers, skiers, bikers, aviators, and for tracking SpO2 and pulse rate before or after exercise.
• Pronta à aduprà: Comes with 2x AAA batteries and a lanyard for immediate convenience.

Image: Labeled diagram of the Innovo Pulse Oximeter, pointing out the Lanyard Loop Hole, Blood Oxygen Saturation Level, Pulse Rate, Plethysmograph, Battery Level Indicator, Perfusion Index, and One-Button Operation.

2. Setup

2.1. Installazione di batterie

1. Aprite u coperchiu di u compartimentu di a batteria situatu nantu à u spinu di u dispusitivu.
2. Insert two AAA batteries into the compartment, ensuring correct polarity (+ and -).
3. Chiudere in modu sicuru u coperchiu di u compartimentu di a batteria.

2.2. Attaccà u cordinu

The device comes with a lanyard for easy carrying and to prevent loss. Follow these steps to attach it:

1. Insert the loop of the lanyard into the lanyard holes on the device.
2. Thread the lanyard strap through the loop.
3. Pull the lanyard strap until it is tight and secured.

Image: Step-by-step diagram illustrating how to attach the lanyard to the pulse oximeter.

3. Operating Instructions

3.1. Piglià una misura

1. Insert one of your fingers completely into the rubber opening of the oximeter with the nail surface upward.
2. Press the power button on the front panel to turn on the oximeter.
3. Mantene a manu ferma durante a misurazione. U muvimentu pò influenzà a precisione.
4. Read the measured data from the display screen. The SpO2 (blood oxygen saturation) and PRbpm (pulse rate) values will be shown. The Plethysmograph waveform and Perfusion Index (PI) will also be displayed.
5. The device will automatically power off after approximately 8 seconds if no finger is detected, conserving battery life.

Image: A person demonstrating the use of the Innovo Pulse Oximeter by placing it on their finger.

3.2. Capisce e vostre letture

• SpO2 (%): Questu indica u percentualetage of oxygen in your blood. Normal healthy adult values are typically between 95% and 100%.
• PRbpm: This is your pulse rate, measured in beats per minute.
• Plethysmograph: The waveform displayed on the screen. Each wave corresponds to a heartbeat, and the amplitude indicates the amount of blood detected. A stable, consistent waveform suggests a reliable reading.
• Indice di Perfusione (PI): This value reflects the strength of your pulse signal. A PI value below 0.2% may indicate that your finger is too cold or improperly positioned, potentially affecting reading accuracy. Warm your finger and reposition it directly under the LED lights for better results.

3.3. Display Orientation and Settings

The display orientation can be changed by briefly pressing the power button while the device is on. This allows for viewing the readings from different angles. The device also features adjustable alarm limits for SpO2 and pulse rate, and brightness settings, accessible through a menu by holding down the power button.

4. Mantenimentu

4.1. Pulizia

To clean the oximeter, wipe the surface with a soft cloth dampened with medical alcohol (70% isopropyl alcohol). Do not immerse the device in water or any cleaning solution. Ensure the device is completely dry before reuse.

4.2. Sustituzione di batterie

When the battery indicator on the display shows low power, replace the batteries promptly to ensure accurate readings. Follow the battery installation steps in Section 2.1.

4.3. Storage

Store the oximeter in a cool, dry place away from direct sunlight, extreme temperatures, and humidity. If the device will not be used for an extended period, remove the batteries to prevent leakage and damage.

5. Risoluzione di prublemi

If problems persist after attempting the above solutions, please contact Innovo customer support for further assistance.

6. Specificazioni

7. Garanzia è Support

For warranty information, technical support, or any inquiries regarding your Innovo Deluxe iP900AP Fingertip Pulse Oximeter, please refer to the official Innovo website or contact their customer service directly. Contact details are typically available on the product packaging or the manufacturer's official online presence.

Innovo is a registered trademark of USPTO. The company actively pursues parties who infringe on their intellectual property rights. Innovo Pulse Oximeters are designed in the USA.