Scrivania LED Baseus Lamp Manuale d'istruzzioni

Product Overview

U Scrivania LED Baseus Lamp is a versatile, cordless lighting solution designed for various environments such as home offices, kitchens, bedrooms, and study areas. It features touch controls for brightness adjustment, magnetic mounting for easy installation, and a convenient 30-second turn-off delay.

Figura 1: Baseus LED Desk Lamp and its magnetic base.

Ciò chì hè inclusu

À u mumentu di u disimballaggio, assicuratevi chì tutti i cumpunenti seguenti sianu presenti:

• Magnetic desk lamp (x1)
• 1M USB Type-C cable (x1)
• Magnetic strip base (x1)
• Manuale d'uso (x1)

Installazione è installazione

U Scrivania LED Baseus Lamp offers flexible installation options due to its magnetic design.

1. Attaccu Magneticu: U lamp features a built-in magnet, allowing it to be directly adsorbed onto any ironwork surface.
2. Installazione adesiva: For non-iron surfaces, use the included 3M adhesive strip on the magnetic base. Ensure the surface is clean and flat before attaching the base. Once the base is secured, the lamp pò esse attaccatu magneticamente à ellu.

Figure 2: The magnetic base allows for easy attachment to various surfaces.

Video 2: Demonstration of magnetic installation.

Istruzzioni di funziunamentu

U lamp is controlled via sensitive touch buttons located on its surface.

• Accensione / spegnimentu: Press the power button (⑁) to turn the lamp on o off.
• Ajustamentu di luminosità:
  • Single click the brightness adjustment buttons (⌃ / ⌄) for three preset brightness levels.
  • Long press the brightness adjustment buttons (⌃ / ⌄) for stepless dimming, allowing you to fine-tune the brightness from 10% to 100%. The lamp remembers your last brightness setting.
• 30-Second Turn-off Delay: Single click the timer button (⏱) to activate a 30-second delay before the light turns off. This feature provides a buffer, allowing your eyes to adjust to darkness and preventing you from fumbling in the dark.
• Ajustamentu di l'angolo: U lamp body can be rotated 80 degrees to direct light precisely where needed, reducing glare and reflection.

Figure 3: Touch control interface for power, brightness, and delay.

Video 3: Demonstration of brightness adjustment.

Figure 4: The 30-second turn-off delay feature.

Video 4: Demonstration of 30-second turn-off delay.

Batteria è carica

U lamp is equipped with a built-in 1800mAh USB rechargeable battery.

• Carica: Use the provided USB Type-C cable to charge the lamp. A full charge typically takes 4-5 hours.
• Durata di a batteria: The wireless rechargeable bar light can be used for 4-24 hours on a single charge, depending on the brightness level set.

Figure 5: Battery life estimates based on brightness levels.

Video 5: Charging the Baseus LED Desk Lamp.

Applicazioni cunsigliatu

Stu versatile lamp is suitable for a wide range of uses:

• Under cabinet lighting in kitchens
• Closet lighting
• Scrivania lamp for reading or study
• Luce d'emergenza
• Fill light for mirrors or makeup areas
• Stairs and hallway lighting

Figura 6: Esamples di u lamp's use in different settings.

Video 6: Various usage scenarios for the lamp.

Specificazioni di u produttu

Risoluzione di prublemi

If you encounter any issues with your Baseus LED Desk Lamp, please refer to the following common solutions:

• Luce chì ùn si accende micca: Assicuratevi chì lamp is charged. Connect it to a power source using the USB-C cable and allow it to charge for a few minutes before attempting to turn it on again.
• Brightness not adjusting: Check if you are using the correct touch gestures. A single tap cycles through preset levels, while a long press enables stepless dimming.
• Magnetic base not holding: Ensure the surface where the magnetic base is attached is clean, dry, and smooth. If using the adhesive, ensure it has fully cured (typically 24 hours) before applying significant weight or force.
• Corta durata di a bateria: Battery life varies significantly with brightness settings. Using the lamp at higher brightness levels will deplete the battery faster. Ensure the lamp is fully charged before extended use.

For persistent issues not covered here, please contact Baseus customer support.

Garanzia è Supportu

Baseus is committed to customer satisfaction. We provide lifetime technical support and service for your product. For any inquiries or assistance, please contact our 24-hour friendly customer service team.

Please note: It is recommended to fully charge the lamp before its first use to optimize battery performance.