Beiooya 20 Bar Espresso Machine Instruction Manual

1. Salvaguardi impurtanti

Leghjite attentamente tutte l'istruzzioni prima di utilizà questu apparecchiu. Cunservate stu manuale per riferimenti futuri.

• Assicuratevi chì u voltage currisponde à a vostra alimentazione.
• Ùn immergete micca l'apparecchiu, u cavu di alimentazione o a spina in acqua o altri liquidi.
• Scollegate da a presa quandu ùn hè micca in usu è prima di pulisce. Lasciate rinfriscà prima di mette o toglie pezzi, è prima di pulisce l'apparechju.
• Ùn operate micca l'apparechju cù un cordone o una spina dannatu, o dopu chì l'apparechju hà malfunzionatu o hè statu dannatu in ogni modu.
• L'usu di accessori accessorii micca cunsigliatu da u fabricatore di l'apparecchiu pò causà incendi, scossa elettrica, o ferite à e persone.
• Ùn aduprate micca fora.
• Ùn lasciate micca u cordone pendu nantu à u bordu di una tavula o un bancu, o toccu superfici calde.
• Ùn mette micca sopra o vicinu à un bruciatore di gas o elettricu caldu, o in un fornu cale.
• Attaccate sempre prima a spina à l'apparecchiu, dopu inserite u cavu in a presa murale. Per disconnectà, mette qualsiasi cuntrollu in pusizione "off", dopu caccià a spina da a presa murale.
• Stu apparecchiu hè solu per l'usu domesticu.
• Exercise extreme caution when using hot steam.

2. Produttu Finituview

Familiarize yourself with the components and controls of your Beiooya Espresso Machine.

2.1 Descrizzione di i cumpunenti

The following image illustrates the main parts of the espresso machine:

Image: Labeled diagram of the espresso machine components. Key parts include the Preheat Tray, Buttons, Water Tank Cover, Pressure Gauge, Steam Knob, Removable Water Tank, Detachable Steam Pipe, Detachable Drip Tray, Brewing Handle, and Coffee Spoon.

2.2 Panel Control Digital

The top panel features illuminated buttons for various functions and a durable stainless steel cup plate for pre-heating coffee cups.

Image: Un detallatu view of the machine's digital control panel, showing the power button, single cup function key (with hot water indicator), and double cup function key (with steam indicator). The stainless steel cup warming plate is also visible.

2.3 Swivel Control Knob

The swivel control knob allows selection between coffee brewing, steam, and hot water functions.

Image: The swivel control knob on the side of the machine, clearly marked for Coffee Function Gear, Steam Function Gear, and Hot Water Function Gear. This image also shows the machine actively brewing espresso into two cups.

3. Setup

3.1 Pulizia iniziale

1. Eliminate tutti i materiali di imballaggio è etichette.
2. Wash the removable water tank, brewing handle, filter basket, and coffee spoon in warm soapy water. Rinse thoroughly and dry.
3. Pulisce l'esterno di a macchina cù l'annunziuamp tela. Ùn immerse micca a unità principale in acqua.

3.2 Riempimentu di u Tank d'acqua

1. Cacciate u serbatu d'acqua da u fondu di a macchina.
2. Fill the tank with fresh, cold water up to the 'MAX' line. Do not overfill. The tank has a capacity of 37 oz (1100 mL).
3. Place the water tank back onto the machine, ensuring it is seated correctly.

3.3 Primu usu / Primu avviamentu di a macchina

Before first use or if the machine has not been used for a long time, it needs to be primed to ensure water flows through the system.

1. Assicuratevi chì u tank d'acqua hè pienu.
2. Place a cup under the brewing head and another under the steam wand.
3. Plug the machine into a grounded power outlet. Press the power button. The single and double shot buttons will flash, indicating preheating.
4. Once the buttons stop flashing and remain steadily lit, the machine is ready.
5. Turn the swivel control knob to the 'Hot Water' position (usually indicated by a water droplet symbol). Allow water to flow into the cup for about 30 seconds.
6. Turn the swivel control knob back to the 'Coffee' position.
7. Press the single shot button to dispense water through the brewing head for about 30 seconds.
8. A macchina hè avà pronta è pronta per l'usu.

4. Operating Instructions

4.1 Pre-heating Cups

For best results, pre-heat your espresso cups on the stainless steel cup plate located on top of the machine. This helps maintain the temperature of your espresso.

4.2 Preparazione di Espresso

1. Ensure the machine is primed and preheated (buttons are steadily lit).
2. Select the appropriate filter basket (single or double shot) and place it into the brewing handle.
3. Using the coffee spoon, add finely ground espresso coffee to the filter basket. For a single shot, use one level spoon; for a double shot, use two level spoons.
4. Aduprà u tamper end of the coffee spoon to firmly press down the coffee grounds. Ensure the surface is level.
5. Attach the brewing handle to the brewing head by aligning it with the 'lock' symbol and rotating it counter-clockwise until it is securely in place and facing forward.
6. Place one or two pre-heated espresso cups under the brewing spouts.
7. Press either the single shot or double shot button. The machine will begin brewing espresso.
8. Una volta chì a quantità desiderata di caffè espresso hè stata dispensata, a macchina si fermerà automaticamente.
9. Carefully remove the brewing handle (it may be hot) and discard the used coffee grounds. Rinse the filter basket and brewing handle.

4.3 Usendu a lancia di vapore per schiumà u latte

The 360° swivel steam wand allows for easy frothing of milk for lattes and cappuccinos.

Image: The Beiooya espresso machine with its 360-degree swivel steam wand actively frothing milk in a pitcher, demonstrating its capability to create microfoam for various coffee beverages like lattes and cappuccinos.

1. Ensure the machine is preheated.
2. Riempite una caraffa schiumogena in acciaio inox cù latte fretu (di latte o senza latte) finu à un terzu.
3. Position the frothing pitcher under the steam wand. Submerge the tip of the steam wand just below the surface of the milk.
4. Turn the swivel control knob to the 'Steam' position.
5. Steam will begin to release. Move the pitcher slowly up and down, keeping the steam wand tip just below the surface to create foam.
6. Once the milk has reached the desired temperature and consistency (approximately 140-150°F or 60-65°C), turn the swivel control knob back to the 'Coffee' position to stop the steam.
7. Asciugate subitu a lancia di vapore cù l'adamp pannu per impedisce chì i residui di latte si asciughinu.

4.4 Funzione d'acqua calda

Per distribuisce acqua calda per tè o Americani:

1. Ensure the machine is preheated.
2. Pone una tazza sottu à a bacchetta di vapore.
3. Turn the swivel control knob to the 'Hot Water' position.
4. Hot water will dispense from the steam wand.
5. Turn the knob back to the 'Coffee' position to stop the flow.

4.5 High Pressure Extraction

The machine features a 20-bar Italian pump for optimal extraction, ensuring a rich and aromatic coffee experience.

Image: The espresso machine brewing coffee, highlighting its high-pressure extraction capabilities. The image also provides key dimensions of the machine: approximately 12 inches high, 11.2 inches wide, and 5 inches deep.

5. Mantenimentu

5.1 Pulizia di u vassoio di gocciolamentu

The removable drip tray simplifies the cleaning process.

1. When the drip tray indicator floats up, it's time to empty it.
2. Tirate cù cura u vassoio di gocciolamentu.
3. Empty the water and rinse the tray with warm soapy water. Dry thoroughly before replacing.

5.2 Pulizia di a lancia di vapore

It is crucial to clean the steam wand immediately after each use to prevent milk residue buildup.

1. Dopu avè fattu a schiuma, asciugate a lancia di vapore cù un add.amp tela.
2. Briefly turn the steam knob to release a short burst of steam to clear any internal milk residue.
3. If the steam wand becomes clogged, use the cleaning pin (if provided) to clear the nozzle hole. The steam pipe is detachable for thorough cleaning.

5.3 Decalcificazione

Regular descaling is essential to maintain machine performance and extend its lifespan, especially in areas with hard water. Descale every 2-3 months or as needed.

1. Preparate una suluzione disincrostante secondu l'istruzzioni di u fabricatore di u disincrostante (per esempiu, acetu biancu è acqua, o un agente disincrostante cummerciale).
2. Riempi u cisterna d'acqua cù a suluzione decalcing.
3. Place a large container under the brewing head and another under the steam wand.
4. Turn on the machine and allow it to preheat.
5. Run half of the solution through the brewing head by pressing the double shot button multiple times.
6. Run the remaining half of the solution through the steam wand by turning the swivel control knob to 'Hot Water' and then 'Steam'.
7. After dispensing all the solution, rinse the water tank and fill it with fresh water.
8. Repeat steps 5-7 with fresh water to thoroughly rinse the machine.

6. Risoluzione di prublemi

Riferitevi à sta sezione per i prublemi cumuni è e so suluzioni.

6.1 Troubleshooting Video

This video demonstrates some operational aspects of the machine, which may assist in troubleshooting or understanding its functions.

Video: A user-submitted video demonstrating the operation of the espresso machine, including preparing coffee and using the steam wand. This can be helpful for visual guidance on setup and usage.

7. Specificazioni

• Marca: Beiooya
• Mudellu: B0CJT3SCJ2
• Pressure System: 20 bar
• Potenza/Wattage: 1450 Watt
• Voltage: 120 Volts
• Capacità di u cisterna d'acqua: 37 oz (1100 ml)
• Materiale: Inossidabile
• Dimensioni di u pruduttu: 30.48 x 28.45 x 12.7 cm (12 x 11.2 x 5 inch)
• Pesu di l'articulu: 3.53 kg
• Funzioni speciali: Auto Clean Function, Milk Frother Steam Wand, Cup Warming Plate
• Usi cunsigliati: Home Use, Creating Espresso-Based Beverages (Cappuccino, Latte)

8. Garanzia è Support

Beiooya provides a Serviziu post-vendita di 1 annu for this espresso machine. We are committed to the quality of our product and your satisfaction.

If you have any questions, concerns, or require assistance with your Beiooya Espresso Machine, please contact our customer support team. Refer to your purchase documentation for specific contact details.

Per piacè conservate a vostra prova di compra per rivendicazioni di garanzia.