1. Introduzione
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Growatt SPE ES Series Hybrid Solar Inverter. The Growatt SPE ES series are single-phase hybrid solar inverters designed for residential solar energy systems, offering efficient power conversion and smart energy management. Please read this manual thoroughly before installation and operation.
2. Setup
2.1 Unboxing è Inspeczione
Carefully unpack the inverter and all accessories. Inspect the contents for any damage. If any components are missing or damaged, contact your supplier immediately.
2.2 Installazione fisica
The inverter should be mounted in a well-ventilated area, away from direct sunlight and moisture. Ensure sufficient clearance around the unit for proper airflow. The dimensions of the inverter are approximately 550mm (W) x 465mm (H) x 150mm (D), and it weighs 21.5kg. Use appropriate mounting hardware to secure the inverter to a sturdy wall or frame.
2.3 Cunnessioni Elettriche
All electrical connections must be performed by a qualified electrician in accordance with local and national electrical codes. Ensure the inverter is switched off before making any connections.
2.3.1 Architettura di u Sistema
The Growatt SPE ES inverter integrates into a comprehensive solar energy system, allowing for spontaneous use of generated power and uploading excess power to the grid. The system typically includes solar panels, the inverter, metering devices, the power grid, and local loads. Monitoring can be done via a Cloud Server, Shine Server, or Shine Phone application.
2.3.2 Ports di cunnessione
The inverter features various connection ports for different components of your solar system:
- PV1, PV2: Photovoltaic input terminals for solar panels.
- Input AC: Connection for the AC grid supply.
- GEN: Generator input terminal.
- Uscita AC: Connection for household loads.
- Input DC: Battery connection terminals.
- CURRENT SHARING: For parallel operation with multiple inverters.
- NC C NO: Cuntattu seccu per u cuntrollu esternu.
- PAR-IN, PAR-OUT: Parallel communication ports.
- BMS, RS485: Communication ports for Battery Management System and other devices.
- WiFi/GPRS, USB: Data communication modules for monitoring.
- INPUT BREAKER: Integrated input breaker for safety.
3. Operating Instructions
3.1 Accensione / spegnimentu
- Assicuratevi chì tutti i cunnessione elettriche sianu sicure è currette.
- Turn on the DC input switch (if present) and then the AC input breaker.
- Locate the 'ON/OFF' switch on the inverter and switch it to 'ON'.
- The inverter display will light up, indicating the startup sequence.
- To power off, reverse the sequence: switch the inverter to 'OFF', then turn off the AC input breaker, and finally the DC input switch.
3.2 Schermu è cuntrolli
The inverter features an LCD display and control buttons for monitoring system status and adjusting settings.
- Display: Shows real-time data such as power generation, battery status, and error codes.
- Buttons (ESC, UP, DOWN, ENTER): Used to navigate menus and confirm selections on the display.
3.3 Surviglianza
The Growatt SPE ES inverter supports remote monitoring via WiFi or 4G communication modules. This allows you to track your system's performance using the Shine Phone app or through the Cloud Server/Shine Server platforms.
- Shine Phone App: Download the official Growatt monitoring app to your smartphone for real-time data and alerts.
- Cloud/Shine Server: Access detailed performance reports and historical data through the web portale.
4. Mantenimentu
4.1 Cura Generale
- Mantene l'inverter pulitu è senza polvere è detriti. Aduprate un pannu dolce è asciuttu per a pulizia.
- Ensure that the ventilation openings (fans) are not blocked to prevent overheating.
- Regularly check all cable connections for tightness and signs of wear or damage.
4.2 Cundizioni Ambientali
To ensure optimal performance and longevity, the inverter should operate within the specified environmental conditions:
- Gamma di temperatura di funziunamentu: -10 °C à +50 °C
- Umidità Relativa: 5% à 95% (senza condensazione)
- Altitudine: <2000 m
- Gradu di prutezzione: IP20 (Indoor use recommended, protect from water and dust ingress)
5. Risoluzione di prublemi
Sè l'inverter ùn funziona micca cum'è previstu, cunsiderate i seguenti passi basi di risoluzione di i prublemi:
- Nisuna alimentazione / Display spento: Check all AC and DC input connections and ensure the ON/OFF switch is in the 'ON' position. Verify power supply from the grid and solar panels.
- Indicatore di guastu attivu: Refer to the inverter's display for specific error codes. Consult the full Growatt user manual (if available) for detailed explanations of fault codes.
- Bassa putenza di uscita: Check solar panel connections and ensure they are clean and free from shading. Verify battery charge level if operating in backup mode.
- Problemi di cumunicazione: Ensure WiFi/4G modules are correctly installed and configured. Check network connectivity.
For complex issues or if troubleshooting steps do not resolve the problem, please contact technical support.
6. Specificazioni
Below are the detailed specifications for the Growatt SPE ES Series Hybrid Solar Inverters:
| Datasheet | SPE 8000 ES | SPE 10000 ES | SPE 12000 ES |
|---|---|---|---|
| Input data (DC) | |||
| Max. recommended PV power (for module STC) | 10000 W | 12500 W | 15000 W |
| Max. DC voltage | 550V | ||
| Principià voltage | 120V | ||
| MPP voltaga gamma | 60V-480V | ||
| No. di trackers MPP | 2 | ||
| No. of PV strings per MPP tracker | 1 | ||
| Max. corrente di input per tracker MPP | 27A | ||
| Output data (AC) | |||
| putenza nominale AC | 8000 W | 10000 W | 12000 W |
| Max. AC putenza apparente | 8000 VA | 10000 VA | 12000 VA |
| Nominale AC voltage | 230V | ||
| Frequenza di rete AC | 50/60 Hz | ||
| Corrente di uscita | 34.8A | 43.5A | 52.2A |
| Fattore di putenza regulabile | 0.8 leader... 0.8 in ritardo | ||
| THDi | < 5% | ||
| Max. conversion efficiency (PV/AC) | 96.5% | ||
| European efficiency @ vnominal (PV/AC) | 95.5% | ||
| Battery data (DC) | |||
| DC nominale voltage | 48V | ||
| Max charging and discharging current | 190A/200A | 220A/240A | 250A/280A |
| Tipu di bateria | Lithium/Lead-acid | ||
| Backup power (AC) | |||
| putenza nominale di output AC | 8000 W | 10000 W | 12000 W |
| Volu nominale di output ACtage | 230V | ||
| Frequenza nominale di output AC | 50/60 Hz | ||
| Cambia u tempu | <20ms@Single <30ms@Paralle |
||
| Efficienza | |||
| Peak. efficiency | 96.5% | ||
| efficienza europea | 95.5% | ||
| Dati generali | |||
| Dimensioni (L / H / P) | 550/465/150 mm | ||
| Pesu | 21.5 kg | ||
| Gamma di temperatura di u funziunamentu | –10°C ... +50°C | ||
| Emissione di rumu (tipicu) | ＜ 75dB | ||
| Autoconsumu | < 75 W | ||
| Topulugia | Senza trasformatore | ||
| Cooling | Fan DC | ||
| Gradu di prutezzione | IP20 | ||
| Umidità relativa | 5% ~ 95% senza condensazione | ||
| Altitudine | ＜ 2000 m | ||
| A cumunicazione | WiFi/4G | ||
7. Cunsiglii d'utilizatori
- Installazione prufessiunale: Always ensure that the inverter is installed by a certified professional to guarantee safety and compliance with electrical standards.
- A ventilazione hè chjave: Proper airflow around the inverter is crucial for preventing overheating and ensuring long-term performance. Regularly check that vents are clear.
- Surveglià regularmente: Utilize the Growatt monitoring app or web platform to keep track of your system's performance, battery status, and energy production. This helps in early detection of any issues.
- Compatibilità di batterie: Ensure that any connected batteries (Lithium or Lead-acid) are compatible with the inverter's specifications for optimal charging and discharging.
- Funzionamentu parallelu: If expanding your system with parallel inverters, ensure correct current sharing and communication connections as per the system architecture.
8. Garanzia è Support
For technical support, warranty claims, or any inquiries regarding your Growatt SPE ES Hybrid Solar Inverter, please use the contact information below. It is recommended to have your product model and serial number ready when contacting support.
- WhatsApp: +86 18473951878
- E-mail: 17680775530@163.com
