AOKIN Raspberry Pi Un Modulu di Display da 3.5 Pollici
Specificazioni
- Alimentazione: 5V 2.5A cunsigliatu
- Compatibilità: Raspberry Pi
- Risoluzione: Dipende da l'imagine di u sistema operativu
- Installazione di u driver necessaria: Iè
Features
- 320×480 resolution, LCD Interface: SPI(Fmax:32MHz)
- Resistive touch control, comes with touch pen
- Supports any revision of Raspberry Pi (directly-pluggable)
- Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+,4B, 5 versions
- Drivers provided (works with your own Raspbian/Ubuntu directly)
- GPIO physical interface, Size perfectly fits the Raspberry Pi
- Supports Raspbian system, ubuntu system ,kali Linux system
Install OS image with pre-loaded LCD Driver
Warm Tips: If you have difficulty installing the driver, or if you stil can’t use the display property after installing the driver, Please Try our Configned images for tested.
Just need to download(the following link) and write the image into the TF card. DO NOT reed any driver installation steps,
https://mega.nz/folder/ixQiTa7R#EM2uFGwMC8QSU6D4untoGA
https://mega.nz/folder/mhw2DCqK#qFiavXCAXOXMqOGjl-Xrtaw
https://mega.nz/folder/mhw2DCqK#qFiavXCAXOXMqOGjl-Xrtaw
- Download and unzip the CS Image you intend to use
- Download and install Raspberry Pi image burn software
- Use Raspberry Pi imager software to flash the OS Image with preloader LCD Driver to the SD card
Passi ：
Cunsiglii caldi：If you have difficulty installing the driver, or if you still can’t use the display properly after installing the driver, Please Try our Configned images for tested. Just need download and write the image into the TF card. DO NOT need any driver installation steps.
- Download and unzip the OS Image you intend to use
- Download and install Raspberry Pi image burn software
- Use Raspberry Pi imager software to flash the OS lmage with pre-loadder LCD Driver to the SD card
If you still keep getting the white screen issue, try the Raspbian Bullseye version at last.
Compatible with (directly-pluggable)
Cunsiglii
- Quandu si usa cù u Raspberry Pi, ci vole prima installà u driver è scrive u codice, altrimenti u schermu apparirà solu in biancu.
- Hè cunsigliatu d'utilizà un alimentatore sopra à 5V 2.5A, altrimenti puderia fiascà à accende è u schermu apparirà solu in biancu.
Interfaces & Description
3.5 inch Raspberry Pi Touch Screen
Domande Frequenti
What should I do if I encounter a white screen issue?
If you are facing a white screen problem, try using the Raspbian Bullseye version as a last resort.
Documenti / Risorse
 |
AOKIN Raspberry Pi Un Modulu di Display da 3.5 Pollici [pdfManuale di u pruprietariu Raspberry Pi Un Modulu di Display di 3.5 Pollici, Modulu di Display di 3.5 Pollici, Modulu di Display, Modulu |