1. Introduzione
This manual provides essential information for the proper installation, operation, and maintenance of your URMET DOMUS 825/201 Outdoor Station Module. This device is designed to function as an outdoor intercom unit, featuring a single call button for visitor communication and an integrated keypad for secure access control. Please read this manual thoroughly before attempting to install or operate the unit.
2. Informazioni di sicurezza
- Sicurezza elettrica: Installation must be performed by qualified personnel in accordance with all local electrical codes and regulations. Disconnect power before installation or maintenance.
- Usu à l'esterno: The module is designed for outdoor use but should be protected from direct, prolonged exposure to extreme weather conditions where possible.
- Evita l'umidità: Do not expose the unit to excessive moisture or immerse it in water.
- Pulizia: Aduprate un pannu suave è seccu per a pulizia. Ùn aduprate micca detergenti abrasivi o solventi.
- Mudazzioni: Do not attempt to modify or repair the unit yourself. Refer all servicing to qualified service personnel.
3. Cuntenutu di u pacchettu
Verificate chì tutti i cumpunenti sò presenti in u pacchettu:
- URMET DOMUS 825/201 Outdoor Station Module
- Hardware di muntatura (viti, ancore)
- Connection cable or adapter (may vary by package)
- Stu Manuale d'Usuariu
Figure 1: URMET DOMUS 825/201 Outdoor Station Module. This image shows the front view of the module, highlighting the call button and the integrated keypad.
4. Setup è Installazione
Proper installation is crucial for the optimal performance of the outdoor station module. Consult a qualified electrician if you are unsure about any steps.
4.1 Situazione di muntatura
- Choose a secure, easily accessible location near the entrance.
- Assicuratevi chì a superficia di muntatura sia piana è stabile.
- Consider the height for comfortable use by all individuals.
4.2 Connessioni Wiring
- Disconnect Power: Ensure all power to the intercom system is turned off at the main circuit breaker.
- Preparà u cablaggio: Route the necessary communication and power cables from your indoor intercom unit to the chosen outdoor module location.
- Cunnette i fili: Carefully connect the wires to the corresponding terminals on the back of the URMET DOMUS 825/201 module. Refer to the wiring diagram provided with your specific intercom system for exact connections (e.g., power, audio, video, lock release).
- Cablaggio sicuru: Assicuratevi chì tutte e cunnessione sianu strette è isolate per impedisce i cortocircuiti.
4.3 Muntaggio di u Modulu
- Attaccà a piastra posteriore: If applicable, secure the module's backplate to the wall using the provided screws and anchors.
- Mount Module: Carefully attach the URMET DOMUS 825/201 module to the backplate, ensuring it is securely fastened.
- Ripristina l'energia: Once installation is complete and verified, restore power to the intercom system.
4.4 Initial Keypad Programming
The keypad requires initial programming to set access codes. Refer to your specific intercom system's main unit manual for detailed instructions on how to enter programming mode and set user codes. Typically, this involves entering a master code followed by a sequence to add or delete user codes.
5. Operating Instructions
5.1 Using the Call Button
To initiate a call to the indoor unit, simply press the designated call button on the outdoor station module. The indoor unit will ring, and communication can be established.
5.2 Using the Keypad for Access
To gain access via the keypad, enter your pre-programmed access code. Upon successful entry, the door or gate connected to the system will unlock for a short period, allowing entry.
6. Mantenimentu
- Pulizia: Periodically wipe the surface of the module with a soft, damp tela per caccià a polvera è a terra. Evite l'usu di sustanzi chimichi duri o materiali abrasivi.
- Ispezione: Regularly check the module for any signs of damage, loose connections, or wear. Ensure the call button and keypad keys are functioning correctly.
- Prutezzione di l'ambiente: While designed for outdoor use, consider adding a protective cover or canopy if the unit is exposed to severe weather conditions.
7. Risoluzione di prublemi
If you encounter issues with your URMET DOMUS 825/201 module, refer to the following common problems and solutions:
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| No power to the module | Power supply disconnected or faulty; circuit breaker tripped. | Check power connections and circuit breaker. Ensure the power supply is functioning. |
| Call button not working | Loose wiring; faulty button; indoor unit not powered. | Inspect wiring connections. Check if the indoor unit is powered. If the button is physically damaged, contact support. |
| Keypad not responding or incorrect codes | Incorrect code entered; keypad wiring issue; programming error. | Verify the access code. Check keypad wiring. Re-program the access codes as per your intercom system's manual. |
| Qualità audio povera | Loose audio wiring; interference. | Check audio wiring connections. Ensure cables are properly shielded and routed away from power lines. |
Sè u prublema persiste dopu avè pruvatu ste suluzioni, cuntattate l'assistenza tecnica qualificata.
8. Specificazioni
- Marca: URMET
- Mudellu: 825/201 (Numeru di Parte: 90647)
- Pesu di l'articulu: Circa 10 grammi
- Batterie necessarie: Innò
- Batterie incluse: Innò
- ASIN: B00009WN23
- Prima data dispunibile: 16 nuvembre 2018