Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of your Kingston Brass KB3605BL Vintage 4-Inch Centerset Lavatory Faucet. Please read all instructions carefully before beginning installation to ensure proper function and longevity of your product. This faucet features a classic design with an oil rubbed bronze finish, designed for deck mount, three-hole installations.
Image: The Kingston Brass KB3605BL Vintage 4-Inch Centerset Lavatory Faucet in Oil Rubbed Bronze.
Informazioni di sicurezza
- Always turn off the main water supply before installing or performing maintenance on the faucet.
- Portate equipaggiamenti di prutezzione individuale adatti, cum'è occhiali di sicurezza, durante l'installazione.
- Sè vo avete qualchì dubbitu nantu à qualchì parte di u prucessu d'installazione, cunsultate un idraulicu qualificatu.
- Assicuratevi chì tutte e cunnessione sianu sicure per impedisce perdite.
Cuntenutu di u pacchettu
Verificate chì tutti i cumpunenti sò presenti prima di principià l'installazione:
- Lavatory Faucet Assembly
- Hardware di muntatura
- Matching Pop-Up Drain Assembly
Specificazioni
| Feature | Detail |
|---|---|
| Numero di mudellu | KB3605BL |
| Tipu di finitura | Bronzu strofinatu à l'oliu |
| Materiale | Brass |
| Tipu di muntatura | Muntagna Deck |
| Tipu di stallazione | Centru |
| Numeru di buchi | 3 |
| Nùmeru di manichi | 2 |
| Spurte Reach | 4 inch |
| Spout Altura | 3.5 inch |
| Liquidazione di u beccu | 2 inch |
| Rate Massimu di flussu | 1.8 Gallons Per Minute (6.8 Liters Per Minute) |
| Tipu cartuccia | Dura Seal Washerless |
| Funzione speciale | Pop Up Drain Included |
Image: Dimensional drawing providing precise measurements for installation.
Installazione è installazione
This faucet is designed for a 4-inch centerset, three-hole deck mount installation. Follow these general steps:
- Preparate u lavandinu: Ensure the sink deck is clean and free of debris. The faucet requires three holes, typically 4 inches apart (centerset).
- Installate u corpu di u rubinettu: Place the faucet body onto the sink holes. Secure it from underneath the sink using the provided mounting hardware (washers and nuts). Tighten securely but do not overtighten.
- Cunnette e linee di furnimentu d'acqua: Attach the hot and cold water supply lines to the faucet's inlets. Use thread sealant tape on the threaded connections and tighten with a wrench. Connect the other ends to your home's hot and cold water supply valves.
- Install the Pop-Up Drain: Insert the drain body into the sink's drain hole. Apply plumber's putty or silicone sealant around the flange to create a watertight seal. Secure the drain body from underneath with the washer and nut.
- Connect the Pop-Up Rod: Assemble the pop-up rod mechanism according to the diagram. Connect the horizontal pivot rod to the vertical pop-up rod using the clevis strap and screw. Ensure smooth operation of the drain stopper.
- Test per fughe: Once all connections are made, slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, tighten the connections as necessary.
Image: Diagram showing the pop-up drain assembly, including the pivot rod, clevis screw, clevis strap, plunger, and pop-up rod.
Operazione
The Kingston Brass KB3605BL faucet features two handles for controlling water flow and temperature:
- acqua fridda: The right handle controls the cold water supply. Turn it counter-clockwise for ON and clockwise for OFF.
- Acqua calda: The left handle controls the hot water supply. Turn it counter-clockwise for ON and clockwise for OFF.
- Controlu di a temperatura: Adjust the hot and cold handles simultaneously to achieve the desired water temperature.
- Rate di flussu: The faucet delivers a maximum flow rate of 1.8 gallons per minute (GPM) at 60 PSI.
- Scaricu à scattu: Lift the small rod located behind the faucet spout to close the drain stopper. Push it down to open the drain.
Mantenimentu
Proper care will maintain the finish and performance of your faucet:
- Pulizia: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or polishes that can damage the finish.
- Mantenimentu di l'aeratore: If water flow decreases or becomes irregular, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and rinse thoroughly before reattaching.
- Prevenzione di fughe: The faucet uses a drip-free washerless cartridge system. If a leak occurs from the handles, the cartridge may need to be inspected or replaced.
Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| Flussu d'acqua bassu | Aeratore intasatu; valvole di alimentazione parzialmente chjuse. | Clean aerator; ensure supply valves are fully open. |
| Faucet Leaks from Spout | Cartuccia usurata. | Sustituite a cartuccia. |
| Leaks from Handle Base | Loose packing nut; worn O-rings or cartridge. | Tighten packing nut; replace O-rings or cartridge. |
| Prublemi di temperatura di l'acqua | Incorrect supply line connections; water heater issues. | Verify hot/cold connections; check water heater. |
Infurmazioni di Garanzia
Kingston Brass products come with a generous product warranty. For specific details regarding your faucet's warranty coverage, please refer to the warranty documentation included with your purchase or visit the official Kingston Brass websitu.
Supportu
If you require further assistance or have questions not covered in this manual, please contact Kingston Brass customer support. You can typically find contact information on the manufacturer's websitu o nantu à l'imballu di u pruduttu.
Per più infurmazione, visitate u Kingston Brass Store.
