1. Produttu Finituview
The Nyko Charge Base S is designed to conveniently store and charge two Xbox 360 wireless controllers. It includes two custom NiMH rechargeable batteries, providing an easy drop-in charging solution. The dual-port recharging dock is AC powered, eliminating the need for additional cables to the console. Each rechargeable battery offers up to 20 hours of playtime.
Image: The Nyko Charge Base S, showcasing the charging dock, two Xbox 360 controllers, and two separate rechargeable battery packs.
Funzioni chjave:
- Drop-and-charge design for easy recharging without removing batteries.
- Two custom NiMH rechargeable batteries provide up to 20 hours of play time per charge.
- Dual-port recharging dock charges both controllers simultaneously.
- LED lights clearly indicate charging status.
- Plugs into any standard wall outlet for rapid recharging.
2. Cuntenutu di u pacchettu
Verificate chì tutti l'articuli sò presenti in u vostru pacchettu:
- 1 x Nyko Charge Base S (Dual-port recharging dock)
- 2 x Custom NiMH Rechargeable Batteries
- 1 x Adattatore di alimentazione CA.
- 1 x Manuale di istruzioni
Image: The retail packaging for the Nyko Charge Base S, illustrating the included charger, two Xbox 360 controllers, and two rechargeable battery packs.
3. Setup
3.1 Installing the Rechargeable Batteries
To prepare your Xbox 360 wireless controllers for charging with the Nyko Charge Base S, you must first install the custom NiMH rechargeable batteries.
- Open the battery compartment on the back of your Xbox 360 wireless controller.
- Remove any existing batteries or battery packs.
- Insert a Nyko custom NiMH rechargeable battery pack into the compartment, ensuring the contacts align correctly.
- Chiudere in modu sicuru u coperchiu di u compartimentu di a batteria.
Image: An Xbox 360 wireless controller shown with the Nyko rechargeable battery pack correctly installed in its rear compartment.
Imagine: Un primu pianu view of the Nyko custom NiMH rechargeable battery pack, highlighting its contact points and design.
3.2 Connecting the Charge Base S
Connect the Charge Base S to a power source:
- Plug the AC power adapter into the power input port on the back of the Charge Base S.
- Inserite l'altra estremità di l'adattatore di corrente CA in una presa di corrente standard.
- The Charge Base S is now ready for use.
4. Operazione
4.1 Charging Controllers
To charge your Xbox 360 wireless controllers:
- Ensure the custom NiMH rechargeable batteries are installed in your controllers (refer to Section 3.1).
- Gently place an Xbox 360 wireless controller onto one of the charging docks on the Charge Base S. Ensure the controller's battery contacts align with the charging pins on the base.
- The LED indicator on the Charge Base S for that dock will illuminate to show the charging status.
- Repeat for the second controller if desired.
Image: Two Xbox 360 wireless controllers are shown securely docked in the Nyko Charge Base S, indicating they are ready for or currently undergoing charging.
4.2 Indicatori LED
The Charge Base S features LED indicators to communicate the charging status of each controller:
| Colore indicatore | Status |
|---|---|
| Rossu | Controller is charging. |
| Verde | Controller is fully charged. |
| Off | No controller docked or charging cycle complete and controller removed. |
A single battery typically charges in approximately 2 hours, while two batteries charging simultaneously will take about 4 hours.
5. Mantenimentu
- Pulizia: Disconnect the Charge Base S from the power outlet before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or abrasive materials.
- Conservazione: When not in use for extended periods, store the Charge Base S and batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- Cura di a batteria: To prolong battery life, avoid completely draining the batteries before recharging. It is recommended to charge them regularly.
6. Risoluzione di prublemi
If you encounter issues with your Nyko Charge Base S, please refer to the following table:
| Prublemu | Soluzione Possibile |
|---|---|
| U controller ùn si carica micca. | Ensure the AC power adapter is securely plugged into both the Charge Base S and a working wall outlet. Verify that the controller is correctly seated on the charging dock and the battery contacts are aligned. Check if the custom NiMH battery pack is properly installed in the controller. |
| L'indicatore LED ùn s'illumina micca. | Confirm the Charge Base S is receiving power. Try plugging it into a different outlet. Ensure a controller with a Nyko battery pack is correctly placed on the dock. |
| Short battery life after charging. | Batteries may have reached the end of their lifespan and require replacement. Ensure controllers are fully charged (green LED) before use. |
| Controller does not fit on the dock. | Ensure you are using an official Xbox 360 wireless controller with the Nyko custom NiMH battery pack. The Charge Base S is specifically designed for this configuration. |
7. Specificazioni
- Numero di mudellu: 86074
- Dimensioni di u pruduttu: 9.25 x 4.15 x 2.4 inch
- Pesu di l'articulu: 1.1 liri
- Tipu di batterie: Custom NiMH rechargeable battery pack
- Capacità di a batteria: 1200mAh (as per battery label in image)
- Tempu di carica: Approximately 2 hours for one battery, 4 hours for two batteries simultaneously.
- Tempu di ghjocu: Up to 20 hours per fully charged battery.
- Fonte di energia: AC Wall Outlet
8. Garanzia è Support
For warranty information, technical support, or to register your product, please visit the official Nyko websitu o cuntattate u so serviziu clienti. Cunservate a vostra ricevuta di compra cum'è prova di compra.
You can also scan the QR code below for more information:
Scan this QR code for additional product information and support from Nyko Technologies.
