1. Introduzione
This manual provides essential information for the correct installation, use, and maintenance of your Fiamma Awning Bracket Kit, Model 98655-745. This kit is designed to securely mount a Fiamma awning to specific vehicle models. Please read these instructions thoroughly before beginning installation to ensure safety and proper function.
2. Istruzzioni di sicurità
- Installazione prufessiunale cunsigliata: If you are unsure about any step, consult a qualified professional for installation.
- Strumenti: Use appropriate tools for installation. Ensure all tools are in good working condition.
- Fixazione sicura: All brackets and fasteners must be securely tightened according to torque specifications (if provided by awning manufacturer). Loose components can lead to failure.
- Compatibilità di u veiculu: Verify that this bracket kit is compatible with your specific vehicle model and year before installation.
- Limiti di pesu: Ensure the vehicle structure can support the weight of the awning and brackets.
- Ispezione regulare: Periodically check all mounting points and fasteners for tightness and signs of wear or damage.
3. Cuntenutu di u pacchettu
The Fiamma Awning Bracket Kit (Model 98655-745) includes the following components:
- 2 x 20 cm Brackets
- 1 x 12 cm Bracket
- Closing rubber joints (for sealing and protection)
- Necessary fasteners (bolts, nuts, washers) - (Assumed, as typical for bracket kits)
Imagine 1: Esempiuample of Fiamma Awning Bracket Kit components. This image displays the various metal brackets and associated hardware included in the kit, essential for mounting an awning to a vehicle.
4. Compatibilità di i veiculi
This bracket kit is specifically designed for the following vehicle models manufactured from June 2006 onwards:
- Fiat Ducato (L2 - 5420 mm and L3 - 5998 mm chassis lengths)
- Peugeot boxer
- Citroën Jumper
Ensure your vehicle matches these specifications for proper fitment.
5. Setup è Installazione
The following steps outline a general installation procedure. Always refer to the specific awning's instruction manual for detailed mounting points and torque specifications.
- Preparate u veiculu: Park the vehicle on a level surface and engage the parking brake. Ensure the installation area is clean and free of obstructions.
- Identificà i punti di muntatura: Locate the designated mounting points on your vehicle's roof or side panel, as specified by your awning manufacturer. These brackets are typically designed to integrate with existing vehicle features.
- Parentesi di pusizione: Carefully position the 20 cm and 12 cm brackets at their respective mounting locations. The longer brackets are generally used at the ends, and the shorter one in the middle, depending on the awning length and vehicle design.
- Perforà i fori pilota (se necessariu): If drilling is required, mark the precise locations for pilot holes. Use appropriate drill bits and take precautions to avoid damaging internal wiring or components.
- Brackets sicuri: Attach the brackets using the provided fasteners. Ensure all bolts are tightened securely, but do not overtighten. Apply the closing rubber joints as directed to seal and protect the mounting points.
- Tenda di muntagna: Once all brackets are firmly installed, proceed with mounting your Fiamma awning onto these brackets, following the awning's specific instructions.
- Verificazione finale: After installation, double-check all fasteners for tightness. Ensure the awning is securely attached and operates smoothly.
6. Mantenimentu
Proper maintenance ensures the longevity and safe operation of your awning bracket kit.
- Ispezione regulare: Periodically inspect all brackets and fasteners for signs of corrosion, damage, or loosening. This is especially important after long trips or exposure to harsh weather conditions.
- Stringere i fasteners: Re-tighten any loose bolts or nuts to the recommended torque.
- Clean Brackets: Clean the brackets with mild soap and water to remove dirt and grime. Avoid abrasive cleaners that could damage the finish.
- Check Rubber Joints: Ensure the closing rubber joints are intact and providing a proper seal. Replace if cracked or damaged.
7. Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| Brackets feel loose after installation. | I dispositivi di fissaggio ùn sò micca abbastanza serrati. | Re-tighten all bolts and nuts to the manufacturer's recommended torque. |
| Awning does not sit flush or is misaligned. | Incorrect bracket positioning or vehicle incompatibility. | Verify bracket placement against awning instructions. Confirm vehicle compatibility (model and year). |
| Water leakage around mounting points. | Damaged or improperly installed rubber joints/seals. | Inspect and replace any damaged rubber joints. Ensure they are correctly seated to create a watertight seal. |
8. Specificazioni
| Feature | Detail |
|---|---|
| Numero di mudellu | 98655-745 |
| Marca | Fiamma |
| Cumpatibilità | Fiat Ducato, Peugeot Boxer, Citroen Jumper (from 06/2006 onwards) |
| Bracket Lengths | 2 x 20 cm, 1 x 12 cm |
| Materiale | Metallu |
| Tipu di muntatura | U-Bullone (as per product specifications, specific application may vary) |
| Pesu di l'articulu | 2.22 kg (4.88 lbs) |
| Dimensioni di u produttu (L x W x H) | 11.85 x 11.57 x 6.22 inch |
9. Garanzia è Support
Fiamma products are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Fiamma websitu.
For technical assistance, spare parts, or warranty claims, please contact your authorized Fiamma dealer or the Fiamma customer support directly. When contacting support, please have your product model number (98655-745) and purchase information readily available.
Fiamma Official Websitu: www.fiamma.it (Note: This is a general link; specific regional sites may apply.)
