The GREISINGER logo, representing the manufacturer of this oxygen tester.
GREISINGER GOX 100 Tester for the Air User Manual
Model: GOX 100 (Part Number: 600437)
1. Introduzione
The GREISINGER GOX 100 is a compact and precise measuring instrument designed for atmospheric oxygen measurements. It is suitable for a wide range of applications, including scuba diving, workplace safety, and air conditioning and ventilation technology. This manual provides essential information for the proper setup, operation, and maintenance of your GOX 100 device.
2. Informazioni di sicurezza
- Read this manual thoroughly before operating the device.
- Ùn espone micca u dispusitivu à temperature estreme, à a luce diretta di u sole o à l'umidità eccessiva.
- Ensure the sensor is properly connected before taking measurements.
- Only use the device for its intended purpose of measuring atmospheric oxygen.
- Tenite l'apparechju è i so cumpunenti fora di a portata di i zitelli.
- Smaltite e batterie è u dispusitivu secondu e regulazioni lucali.
3. Cuntenutu di u pacchettu
Verificate chì tutti l'articuli sò presenti in u pacchettu:
- GREISINGER GOX 100 Oxygen Meter
- Oxygen Sensor (connected via cable)
- Manuale d'usu
- 9V Block Battery (may not be included, check packaging)
4. Setup
4.1 Installazione di batterie
- Truvate u compartmentu di a bateria in u spinu di u dispusitivu.
- Aprite a tappa di u compartimentu di a batteria.
- Insert a 9V block battery, ensuring correct polarity.
- Chiudere in modu sicuru u coperchiu di u compartimentu di a batteria.
4.2 Cunnessione Sensor
The oxygen sensor is typically pre-connected to the GOX 100 via a cable. Ensure the connection is firm and secure.
The GREISINGER GOX 100 device with its attached oxygen sensor, displaying an oxygen reading of 20.9%.
5. Operating Instructions
5.1 Accensione / spegnimentu
- Per accende u dispusitivu, appughjà u buttone on/off buttone. U display s'illuminerà.
- Per spegnere u dispusitivu, appughjà è tene premutu on/off buttone finu à chì u display si spegne.
5.2 Piglià una Misurazione
- Once powered on, the device will automatically begin displaying the current oxygen concentration in percentage (%).
- Position the sensor in the environment where you wish to measure oxygen. Allow a few moments for the reading to stabilize.
5.3 MIN/MAX Value Recall
- Press u modu button to cycle through different display modes, including minimum (MIN) and maximum (MAX) oxygen values recorded since the device was last powered on or reset.
- To reset MIN/MAX values, refer to the specific instructions in the full manual (if applicable).
5.4 Automatic Off Function
The GOX 100 features an adjustable automatic off function to conserve battery life. If enabled, the device will power off after a period of inactivity. Refer to the full manual for instructions on how to adjust or disable this feature.
6. Calibrazione
Regular calibration ensures the accuracy of your GOX 100. The device supports easy calibration in ambient air.
- Ensure the device and sensor are at a stable temperature.
- Place the sensor in fresh ambient air, away from any sources of gas or fumes.
- Appughjà è tene premutu cal button until the display indicates calibration mode.
- The device will automatically adjust its reading to 20.9% or 21.0% oxygen, which is the approximate concentration of oxygen in normal ambient air.
- Once calibration is complete, the device will return to normal measurement mode.
The GREISINGER GOX 100 displaying 21.0% O2, indicating a successful calibration in ambient air.
7. Mantenimentu
7.1 Rimpianu Sensor
The GOX 100 features a convenient, easily replaceable sensor element. Over time, the sensor's performance may degrade. When replacement is necessary:
- Power off u dispusitivu.
- Carefully disconnect the old sensor from the cable.
- Connect the new, compatible GREISINGER oxygen sensor.
- Eseguite una calibrazione cum'è descritta in a Sezione 6.
7.2 Pulizia
- Pulite l'apparecchiu casing cù un dolce, damp tela. Ùn aduprate micca detergenti abrasivi o solventi.
- Ensure no liquid enters the device or sensor connections.
- Keep the sensor clean and free from dust or debris.
8. Risoluzione di prublemi
| Prublemu | Possibile Causa / Soluzione |
|---|---|
| U dispusitivu ùn accende micca | Check battery installation and charge. Replace battery if necessary. |
| Letture imprecise | Perform calibration (Section 6). Check sensor for damage or contamination. Sensor may need replacement. |
| Display shows 'Err' or similar | Indicates a sensor error or malfunction. Try recalibrating. If issue persists, sensor may need replacement or contact support. |
| Automatic off too soon/not at all | Adjust the automatic off settings (refer to full manual). |
9. Specifiche tecniche
| Parametru | Valore |
|---|---|
| Gamma di misurazione | 0 - 100 % Oxygen |
| Risoluzione | 0.1 % |
| Precisione di misurazione | 0 % (Note: This likely refers to a specific condition or a typo in source data, typical accuracy is usually +/- a percentage point) |
| Alimentazione elettrica | Batteria di bloccu 9V |
| Tipu di prutezzione | IP65 |
| Dimensioni (H x W) | 106 mm x 67 mm |
| Pesu | 150 g (device only, approx.) |
| Cable Length (sensor) | 0.7 m |
| Thermal Compensation | autumàticu |
10. Garanzia è Support
GREISINGER products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official GREISINGER websitu.
For technical support, troubleshooting assistance, or to inquire about replacement parts and sensors, please contact GREISINGER customer service through their official websitu o l'infurmazioni di cuntattu furnite in a ducumentazione di u vostru pruduttu.
