Ford Racing CM6731FL82 High Performance Oil Filter User Manual

1. Introduzione

This manual provides essential information for the proper installation, operation, and maintenance of the Ford Racing CM6731FL82 High Performance Oil Filter. This oil filter is designed to provide superior filtration for engine oil, contributing to engine longevity and performance. It features a heavy gauge base and canister for enhanced strength and resistance to impulse fatigue, and is suitable for use with both standard and synthetic motor oils.

2. Informazioni di sicurezza

• Always allow the engine to cool completely before attempting any work on the oil system to prevent burns from hot oil or engine components.
• Wear appropriate personal protective equipment, including safety glasses and gloves, to protect against oil splashes and sharp edges.
• Ensure the vehicle is securely supported on a level surface using jack stands if lifting is required. Never rely solely on a jack.
• Dispose of used oil and oil filters responsibly according to local environmental regulations.
• Refer to your vehicle's specific service manual for detailed instructions and torque specifications relevant to your vehicle model.

3. Installazione (Configurazione)

Proper installation is crucial for the effective performance of your oil filter. The Ford Racing CM6731FL82 oil filter has a thread size of M16 x 1.5.

Strumenti è Materiali richiesti:

• Chiave per filtru d'oliu
• Drain pan
• New engine oil (refer to vehicle specifications)
• Stracci puliti o asciugamani di officina
• Chiave à presa è presa adatta per u tappu di scaricu

Passi di stallazione:

1. Preparate u veiculu: Park the vehicle on a level surface and engage the parking brake. Allow the engine to cool. If necessary, lift the vehicle safely using jack stands.
2. Svuotà l'oliu vechju: Place a drain pan beneath the oil pan. Remove the oil drain plug and allow all old engine oil to drain completely. Reinstall the drain plug with a new washer if required, and tighten to vehicle manufacturer specifications.
3. Eliminà u vechju filtru: Pusiziunate a vaschetta di scaricu sottu à u vechju filtru d'oliu. Aduprate una chiave per filtru d'oliu per allentà è caccià u vechju filtru. Preparatevi à u drenaggiu di l'oliu residuale.
4. Superficie di montaggio pulita: Pulite accuratamente a superficia di muntatura di u filtru di l'oliu nantu à u bloccu motore, assicurendu chì ùn ci sia micca vechju materiale di guarnizione.
5. Preparà un novu filtru: Apply a thin film of new engine oil to the rubber gasket of the Ford Racing CM6731FL82 oil filter. This ensures a proper seal.
6. Installà un novu filtru: Thread the new oil filter onto the engine block by hand. Once the gasket makes contact with the engine block, tighten the filter an additional 3/4 to 1 full turn, or as specified in your vehicle's service manual. Do not overtighten.
7. Riempimentu d'oliu di u mutore: Remove the engine oil filler cap and add the recommended amount and type of new engine oil as specified by your vehicle manufacturer.
8. Verificate per e fughe: Start the engine and let it run for a few minutes. Turn off the engine and check for any oil leaks around the new filter and drain plug. If leaks are present, re-check tightness.
9. Verificate u livellu di l'oliu: After checking for leaks, wait a few minutes for the oil to settle, then check the engine oil level using the dipstick and add more oil if necessary.

Image 1: Ford Racing CM6731FL82 High Performance Oil Filter. This image displays the exterior of the oil filter, highlighting its white finish and robust construction.

4. Uperativu

Once properly installed, the Ford Racing CM6731FL82 oil filter operates continuously with the engine to remove contaminants from the engine oil. Its design ensures long life with both standard and synthetic motor oils, providing consistent filtration performance throughout its service interval.

After installation, ensure the engine oil level is correct and there are no leaks. The filter will perform its function automatically as the engine runs.

5. Mantenimentu

The primary maintenance for the Ford Racing CM6731FL82 oil filter is its timely replacement. Always adhere to the oil and filter change intervals recommended by your vehicle manufacturer. These intervals are typically found in your vehicle's owner's manual or service schedule. Regular replacement ensures optimal engine protection and performance.

6. Risoluzione di prublemi

Perdite d'oliu dopu l'installazione:

• Causa: Improperly tightened filter, damaged gasket, or old gasket material remaining on the engine block.
• Soluzione: Turn off the engine and allow it to cool. Carefully inspect the filter for tightness. If loose, tighten an additional small amount (e.g., 1/4 turn). If the leak persists, remove the filter, inspect the gasket for damage, and ensure the engine mounting surface is clean and free of debris. Reinstall the filter carefully.

Fitta sbagliata:

• Causa: Incorrect oil filter model for the vehicle.
• Soluzione: Verify that the CM6731FL82 model is the correct filter for your specific vehicle application. Consult your vehicle's owner's manual or a reputable parts catalog.

7. Specificazioni

8. Garanzia è Support

For information regarding product warranty, please refer to the official Ford Racing documentation or contact Ford customer support directly. Support contact details can typically be found on the official Ford websitu o imballaggio di u pruduttu.