1. Introduzione
This manual provides essential information for the safe and efficient operation of your Datalogic PowerScan M8300-AR910RB Handheld Laser Bar Code Reader. Please read this manual thoroughly before using the device to ensure proper setup, operation, and maintenance. Keep this manual for future reference.
2. Informazioni di sicurezza
Osservate sempre e seguenti precauzioni di sicurezza per prevene ferite o danni à u dispusitivu:
- Sicurezza laser: This device emits a laser beam. Do not stare directly into the laser beam or point it at others. Avoid direct eye exposure.
- Sicurezza di a batteria: Use only Datalogic-approved batteries and charging accessories. Do not expose batteries to extreme temperatures, puncture, or disassemble them. Dispose of batteries according to local regulations.
- Cundizioni Ambientali: Do not operate the device in explosive atmospheres or near flammable materials. Keep the device dry and away from extreme temperatures.
- Mantenimentu: Refer all servicing to qualified service personnel. Do not attempt to open or modify the device.
3. Cuntenutu di u pacchettu
Verificate chì tutti l'articuli sò presenti in u pacchettu:
- Datalogic PowerScan M8300-AR910RB Handheld Laser Bar Code Reader
- Batteria amovibile
- Charging/Communication Cradle (may be sold separately depending on configuration)
- USB or Serial Cable (for cradle connection, may be sold separately)
- Power Supply (for cradle, may be sold separately)
- Guida Quick Start
4. Produttu Finituview
The Datalogic PowerScan M8300 is a robust, cordless handheld laser bar code reader designed for industrial applications. It features a durable casing and a 910MHz radio for reliable wireless communication.
Image 1: Datalogic PowerScan M8300 Handheld Laser Bar Code Reader. This image displays the front view of the scanner, highlighting its ergonomic design, scan window, and trigger button.
Cumpunenti chjave:
- Finestra di scansione: Located at the front, where the laser beam exits to read barcodes.
- Trigger: Activates the laser for scanning.
- Indicatori luminosi: Provide feedback on scan status, battery level, and communication.
- Compartimentu di batterie: Located at the base of the handle, housing the removable battery.
- Interfaccia di cumunicazione: For wireless data transmission via the 910MHz radio.
5. Setup
5.1. Installazione di batterie
- Assicuratevi chì u scanner sia spento.
- Locate the battery compartment cover at the bottom of the handle.
- Open the cover and insert the removable battery, ensuring correct polarity.
- Chiudere in modu sicuru u coperchiu di u compartimentu di a batteria.
5.2. Charging the Battery
- Place the scanner into its charging cradle. Ensure the contacts on the scanner align with those on the cradle.
- Connect the power supply to the charging cradle and plug it into an electrical outlet.
- The scanner's indicator light will show charging status (typically amber for charging, green for fully charged).
- Allow the battery to fully charge before first use (approximately 4 hours).
5.3. Connecting to a Host System
The PowerScan M8300 uses a 910MHz radio for wireless communication. It typically connects to a host system (e.g., PC, laptop) via a base station or cradle connected by a USB or serial cable.
- Connect the communication cable (USB or serial) from the charging/communication cradle to your host system.
- Connect the power supply to the cradle and plug it in.
- Place the scanner in the cradle. The scanner and cradle will automatically establish a wireless link.
- Install any necessary drivers or software on your host system as prompted or as instructed by Datalogic documentation for your specific cradle model.
6. Operating Instructions
6.1. Powering On / Off
- Per accende: The scanner typically powers on automatically when removed from the cradle or when the trigger is pressed.
- Per spegne: The scanner will enter a low-power sleep mode after a period of inactivity. To fully power off, remove the battery.
6.2. Scanning Barcodes
- Aim the scan window at the barcode you wish to read.
- Appughjà è tene premutu u buttone di scattu. Apparirà una linea laser.
- Position the laser line across the entire barcode.
- Once the barcode is successfully read, the scanner will emit an audible beep and/or an indicator light will illuminate.
- Release the trigger. The scanned data will be transmitted to the connected host system.
6.3. Trasmissioni di dati
The PowerScan M8300 transmits scanned data wirelessly to its paired base station/cradle. Ensure the scanner is within range of its base station for successful data transfer. Out-of-range scanning capabilities may vary by configuration; refer to advanced programming guides for details.
7. Mantenimentu
7.1. Pulizia di u Dispositivu
- Aduprate un pannu dolce è pulituampfinitu cù acqua o una solu suluzione di pulizia.
- Ùn aduprate micca detergenti abrasivi, solventi o prudutti chimichi aggressivi.
- Gently wipe the scan window and the exterior of the scanner.
- Assicuratevi chì nisun liquidu ùn entre in l'aperture di u dispusitivu.
7.2. Cura di batterie
- Caricà a bateria regularmente.
- Evitate di scaricà cumpletamente a batteria spessu.
- Store the scanner and spare batteries in a cool, dry place when not in use.
7.3. Storage
When storing the scanner for extended periods, ensure the battery is partially charged (around 50%) and remove it from the device if possible. Store in a temperature-controlled environment.
8. Risoluzione di prublemi
If you encounter issues with your PowerScan M8300, refer to the following common problems and solutions:
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| U scanner ùn s'accende micca. | Batteria morta o mal installata. | Check battery installation. Charge the battery. Replace battery if necessary. |
| U scanner ùn legge micca i codici à barre. | Barcode damaged or poorly printed; scan window dirty; incorrect symbology enabled. | Try scanning a different barcode. Clean the scan window. Refer to the programming guide to enable/disable symbologies. |
| No data transmitted to host. | Scanner out of range; base station not connected; communication issue. | Move scanner closer to the base station. Verify base station connection to host. Check base station power. |
| A vita di a bateria hè corta. | Battery nearing end of life; frequent use; improper charging. | Replace battery. Ensure full charges. Reduce backlight/power settings if configurable. |
If the problem persists, contact Datalogic technical support.
9. Specificazioni
The following specifications apply to the Datalogic PowerScan M8300-AR910RB model:
- Numero di mudellu: PM8300-AR910RB
- Dimensioni di u pruduttu: 2.72 x 4.49 x 8.15 inch
- Pesu di l'articulu: 13.9 once
- Produttore: Datalogic ADC
- Fonte di energia: Alimentatu à batteria
- Tecnulugia di cunnessione: Wireless (910MHz)
- Dispositivi cumpatibili: Desktop, Laptop
- UPC: 053926383351
10. Garanzia infurmazione
Datalogic products are covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and product. Please refer to the warranty card included with your product or visit the official Datalogic websitu per infurmazioni dettagliate nantu à a garanzia è e procedure di registrazione.
11. Supportu
For technical assistance, product inquiries, or to report issues, please contact Datalogic customer support:
- Websitu: Visit the official Datalogic website for support resources, FAQs, and driver downloads.
- Cuntattu: Refer to the 'Contact Us' section on the Datalogic websitu per numeri di telefonu è indirizzi email specifichi per a vostra regione.
When contacting support, please have your product model number (PM8300-AR910RB) and serial number ready.