ProMaster LS1(N) Basic Light Stand (Model 9245) Instruction Manual

Introduzione

The ProMaster LS1(N) light stand is a basic, lightweight stand designed for supporting smaller studio lights, LED panels, or camera-mounted flashes. This manual provides essential information for its safe and effective use.

Funzioni chjave

• Disegnu ligeru è portatile.
• Adjustable height for versatile lighting setups.
• Standard 1/4-inch screw mount for broad compatibility with various lighting equipment.
• Durable aluminum alloy construction.
• Stable tripod base.

Istruzzioni di stallazione

Follow these steps to correctly set up your ProMaster LS1(N) Basic Light Stand:

1. Unpack the light stand from its carrying bag.
2. Pone u stand nantu à una superficia plana è stabile.
3. Allargate delicatamente e gambe di u treppiede finu à ch'elle sianu cumpletamente estese è stabili.
4. Loosen the locking knobs on each section of the central column.
5. Extend the central column to the desired height.
6. Tighten all locking knobs securely to prevent slippage.
7. Attach your lighting equipment to the 1/4-inch screw mount at the top of the stand. Ensure it is securely fastened.

Figure 1: The ProMaster LS1(N) light stand shown fully extended with its tripod legs spread for stability.

Istruzzioni di funziunamentu

The ProMaster LS1(N) light stand offers simple adjustments for optimal lighting.

Ajustamentu di l'altezza

1. To adjust the height, loosen the locking knobs on the central column sections.
2. Carefully raise or lower the sections to achieve the desired height.
3. Always re-tighten all locking knobs firmly after adjustment to ensure stability.

Attaccà l'accessori

The top of the stand features a universal 1/4-inch screw mount.

1. Screw your light, camera, or other compatible accessory onto this mount.
2. Ensure the accessory is tightened securely to prevent accidental detachment.

Figura 2: Un primu pianu view of the ProMaster LS1(N) light stand's top mount with a studio light attached, demonstrating its compatibility.

Cura è Mantenimentu

• Regularly inspect all locking mechanisms and screws for tightness.
• Pulite u supportu cù un pannu dolce è asciuttu. Evitate detergenti abrasivi o solventi.
• Store the stand in its carrying bag in a dry, cool place when not in use to protect it from dust and damage.
• Do not overload the stand beyond its recommended weight capacity.

Risoluzione di prublemi

Stand Instability

• Ensure all tripod legs are fully extended and evenly spread.
• Verify that all locking knobs are securely tightened.
• If using heavy equipment, consider adding sandbags to the base for increased stability.

Difficultà à aghjustà l'altezza

• Check that all locking knobs are sufficiently loosened before attempting to adjust the height.
• Ensure no debris is obstructing the telescoping sections.

Specificazioni di u produttu

Garanzia è Supportu

For warranty information or technical support regarding your ProMaster LS1(N) Basic Light Stand, please refer to the official ProMaster website or contact their customer service directly. Keep your purchase receipt for proof of purchase.