1. Introduzione
This manual provides essential information for the proper installation, operation, and maintenance of the Axis Communications T91A64 Corner Bracket. This bracket is designed to facilitate the secure mounting of compatible Axis wall brackets and PTZ dome network cameras on building corners. Please read this manual thoroughly before installation to ensure safe and correct usage.
2. Produttu Finituview
The T91A64 Corner Bracket is a robust accessory for mounting Axis network cameras in corner installations. It is specifically designed for use with Axis T91A61 and T95A61 Wall Brackets, and Q6032-E PTZ Dome Network Cameras, providing a stable and secure mounting point. Its durable construction ensures reliable performance in various environmental conditions.
Image of the Axis Communications T91A64 Corner Bracket, a white metal bracket designed for mounting surveillance cameras on corners.
3. Informazioni di sicurezza
- Personale qualificatu: Installation and service must be performed by qualified personnel only, in accordance with all local codes and regulations.
- Integrità strutturale: Ensure the mounting surface can support the combined weight of the bracket, wall mount, and camera.
- Strumenti: Use appropriate tools for installation. Avoid overtightening screws, which can damage the bracket or mounting surface.
- Cavi: Route all cables safely to prevent damage or tripping hazards.
- Cundizioni Ambientali: Ensure the bracket is installed within its specified operating environment (e.g., temperature, humidity).
4. Cuntenutu di u pacchettu
Verificate chì tutti i cumpunenti sò presenti prima di principià l'installazione:
- Axis Communications T91A64 Corner Bracket
- Mounting screws and anchors (may vary by region)
- Guida d'installazione (stu documentu)
5. Setup è Installazione
This section outlines the general steps for installing the T91A64 Corner Bracket. Specific details for attaching the wall bracket or camera may be found in their respective manuals.
- Selezziunà u locu di muntatura: Choose a corner that provides the desired camera view and has a structurally sound surface capable of supporting the total weight.
- Marcate i punti di perforazione: Hold the T91A64 bracket against the corner and use a pencil to mark the drilling points for the mounting screws. Ensure the bracket is level.
- Perforà i fori pilota: Drill pilot holes at the marked locations. Use a drill bit appropriate for the mounting surface material and the provided anchors/screws.
- Installà l'ancore (se necessariu): Insert wall anchors into the pilot holes if required for your mounting surface.
- Muntà u supportu: Align the T91A64 bracket with the drilled holes and secure it firmly to the corner using the provided screws. Do not overtighten.
- Attach Wall Bracket/Camera: Refer to the installation manual for your specific Axis T91A61/T95A61 Wall Bracket or Q6032-E PTZ Dome Network Camera for instructions on how to attach it to the T91A64 Corner Bracket. Ensure all connections are secure.
- Gestione di Cable: Route all necessary cables through the designated openings in the bracket and wall mount, ensuring they are protected and do not interfere with camera movement (for PTZ cameras).
6. Operating Instructions
The T91A64 Corner Bracket is a passive mounting accessory and does not require active operation. Once installed, its function is to provide a stable platform for your surveillance equipment. Ensure that the camera and its associated wall bracket are securely fastened to the corner bracket at all times.
7. Mantenimentu
- Pulizia: Periodically clean the bracket surface with a soft, damp pannu. Evitate detergenti abrasivi o solventi chì puderanu dannà a finitura.
- Ispezione: Regularly inspect the bracket and its mounting points for any signs of wear, corrosion, or loosening. Tighten any loose screws as needed.
- Prutezzione di l'ambiente: Ensure that the bracket remains free from excessive dirt, debris, or moisture accumulation, especially in outdoor installations.
8. Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| Bracket feels unstable or loose. | Screws are loose; mounting surface is inadequate; incorrect installation. | Check and tighten all mounting screws. Verify the structural integrity of the mounting surface. Re-install if necessary, ensuring proper anchors are used. |
| Difficulty attaching wall bracket/camera. | Misalignment; incompatible components. | Ensure the T91A64 is level and correctly positioned. Confirm compatibility with your specific Axis wall bracket or camera model. Refer to the camera/wall bracket manual. |
| Visible corrosion or damage. | Exposure to harsh elements; physical impact. | Clean the bracket regularly. If damage is significant, consider replacing the bracket to ensure continued structural integrity. |
9. Specificazioni
| Feature | Detail |
|---|---|
| Numero di mudellu | 5017-641 |
| Tipu di muntatura | Wall Mount (Corner) |
| Culore | Biancu |
| Pesu di l'articulu | 3.45 Libbra (1.56 kg) |
| Dimensioni di u produttu (L x W x H) | 14 x 8 x 8 inch (35.56 x 20.32 x 20.32 cm) |
| U fabricatore | AXIS Communications |
| Classificazione di Prutezzione Internaziunale | IP54 |
| Compatible Wall Brackets | Axis T91A61, T95A61 |
| Camera compatible | Axis Q6032-E PTZ Dome Network Cameras (and others compatible with listed wall brackets) |
10. Garanzia infurmazione
Axis Communications products are covered by a limited warranty. The specific terms and duration of the warranty may vary by region and product. Please refer to the official Axis Communications website or contact your local distributor for detailed warranty information. Keep your proof of purchase for warranty claims.
11. Support tecnicu
For technical assistance, troubleshooting, or further information regarding the Axis Communications T91A64 Corner Bracket, please visit the official Axis Communications support websitu à www.axis.com/support. You may also contact your authorized Axis reseller or distributor for local support options.
