Introduzione
This manual provides essential instructions for the safe and effective installation, operation, and maintenance of your Eiko H1155 H11 Series Halogen Replacement Bulb. Please read this manual thoroughly before installation and retain it for future reference.
Informazioni di sicurezza
- ATTENZIONE: Always ensure the vehicle's ignition is off and the battery is disconnected before attempting any electrical work.
- ATTENZIONE: E lampadine alogene funzionanu à alte temperature. Lasciate chì a lampadina si raffreddi cumpletamente prima di manipulalla.
- ATTENZIONE: Avoid touching the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use clean gloves or a clean cloth.
- ATTENZIONE: Smaltite e lampadine vechje in modu responsabile secondu e regulazioni lucali.
Product Overview
The Eiko H1155 is a high-performance H11 series halogen replacement bulb designed to meet or exceed original equipment specifications. It features a tungsten filament for bright, white light output.
Figura 1: Eiko H1155 H11 Series Halogen Replacement Bulb. This image shows the clear glass bulb with its internal tungsten filament, mounted on a metal base with a red rubber seal and a black plastic connector.
Installazione è installazione
- Preparazione: Ensure the vehicle is parked on a level surface, the engine is off, and the parking brake is engaged. Disconnect the negative terminal of the vehicle's battery to prevent accidental electrical shorts.
- Accede à a lampadina: Locate the headlight assembly. Depending on your vehicle model, you may need to remove a cover, fender liner, or other components to access the rear of the headlight housing. Consult your vehicle's owner's manual for specific access instructions.
- Disconnect Wiring: Carefully disconnect the electrical connector from the back of the old bulb.
- Elimina l'antica lampadina: Unclip or twist the retaining mechanism that holds the old bulb in place. Gently pull the old bulb straight out from the housing.
- Installa una nova lampadina: Wearing clean gloves or using a clean cloth, carefully insert the new Eiko H1155 bulb into the headlight housing. Ensure it is seated correctly and the retaining mechanism is secured. Do not touch the glass bulb with bare hands.
- Ricunnette u cablaggio: Ricollegate u connettore elettricu à a nova lampadina.
- Funzionalità di prova: Reconnect the vehicle's battery. Turn on the headlights to verify the new bulb is functioning correctly.
- Riunisce: Reinstall any covers or components that were removed to access the bulb.
Nota: It is recommended to replace both headlamps simultaneously for consistent light output and performance, as bulbs dim over time.
Operazione
The Eiko H1155 Halogen Replacement Bulb operates as part of your vehicle's existing electrical system. Once properly installed, it will illuminate when the vehicle's headlight switch is activated. No special operational procedures are required beyond standard vehicle headlight usage.
Mantenimentu
- Pulizia: If the headlight lens becomes dirty, clean it with a soft cloth and appropriate automotive cleaning solution. Avoid abrasive cleaners.
- Ispezione: Periodically check your headlights for proper function. If a bulb appears dim or has failed, replace it promptly.
- Trattamentu: When replacing bulbs, always handle them by the base to avoid contaminating the glass.
Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| A lampadina ùn si accende. | Incorrect installation, loose connection, blown fuse, faulty wiring, or defective bulb. | Check bulb seating and electrical connection. Inspect vehicle's fuse box for a blown headlight fuse. Consult a qualified mechanic if wiring is suspected. Replace bulb if defective. |
| Bulb is dim or flickers. | Aging bulb, poor electrical connection, or voltage questione. | Replace both bulbs for optimal performance. Check connections. Consult a mechanic for voltage prublemi. |
| U bulbe si brusgia rapidamente. | Voltage spikes, touching the glass during installation, or excessive vibration. | Ensure proper installation without touching the glass. Have vehicle's electrical system checked for voltage irregolarità. |
Specificazioni
| Feature | Detail |
|---|---|
| Marca | Eiko |
| Numero di mudellu | H1155 |
| Tipu di bulbe | Halogen |
| Voltage | 12.8 Volts (Nominal), 13.2 Volts (Max) |
| Wattage | 55 Watt |
| Luminosità | 1345 lumens |
| Average Operating Life | 800 Ore |
| Tipu di basa | Right-Angle Pre-Focus H11 |
| Dimensione di bulbe | T3-1/4 |
| Pesu di l'articulu | 0.8 once |
| UPC | 031293811646 |
Garanzia è Supportu
For warranty information or technical support regarding your Eiko H1155 Halogen Replacement Bulb, please refer to the manufacturer's official website or contact Eiko customer service directly. Keep your purchase receipt as proof of purchase.
Manufacturer: EIkO Auto Lighting
