1. Produttu Finituview
The BriskHeat DHCS13 is a standard heavy-duty drum heater designed for metal drums and pails, specifically fitting 30-gallon (114L) containers. This heater provides efficient and uniform heating for various materials, utilizing a robust construction for durability and safety.
Its design incorporates a patented 360-degree grounded multi-stranded heating element, laminated between two extra-thick layers of 20mil fiberglass-reinforced silicone rubber. This construction ensures excellent strength, durability, and uniform heat distribution, meeting NEC 427.23 standards. The unit is moisture and chemical resistant and features an adjustable thermostat for precise temperature control.
Image 1.1: The BriskHeat DHCS13 drum heater shown installed on a black 30-gallon metal drum. The orange heating bands are visible wrapped around the drum, secured by spring closures.
2. Informazioni di sicurezza
Leghjite attentamente tutte l'istruzzioni prima di l'installazione è di l'usu. U mancatu rispettu di queste istruzzioni pò causà danni materiali, ferite gravi o a morte.
- Ensure the heater is used only on metal drums and pails as specified. Do not use on plastic drums.
- Verificate chì l'alimentazione voltage matches the heater's requirements (120VAC).
- Always ensure the heater is properly grounded. The unit includes a standard 3-prong plug (NEMA 5-15) for this purpose.
- Do not operate the heater in explosive atmospheres or near flammable vapors unless specifically rated for such environments. This heater is not intrinsically safe.
- Avoid direct contact with the heating surface during operation, as temperatures can reach up to 450°F (232°C).
- Do not immerse the heater in liquid. It is moisture and chemical resistant, but not submersible.
- Scollegate l'alimentazione prima di fà qualsiasi manutenzione o aghjustamenti.
- Mantene u cordone di alimentazione luntanu da superfici calde è spigoli vivi.
- Do not modify the heater or its components. Use only genuine BriskHeat replacement parts if necessary.
3. Disimballaggio è cuntenutu
Carefully unpack the BriskHeat DHCS13 drum heater from its packaging. Inspect the unit for any signs of shipping damage. If damage is observed, do not proceed with installation and contact your supplier immediately.
Cuntenutu di u pacchettu:
- BriskHeat DHCS13 Drum Heater (1 unit)
4. Setup è Installazione
The DHCS13 drum heater is designed for easy installation on 30-gallon metal drums.
- Preparate u Tamburu: Ensure the metal drum is clean and free from any debris or flammable residues on its exterior surface where the heater will be applied.
- Pone u riscaldatore: Wrap the DHCS13 drum heater around the circumference of the 30-gallon metal drum. Position it at the desired height, typically around the lower or middle section of the drum, depending on the material to be heated.
- Secure the Heater: The heater features a spring closure mechanism. Expand the spring closure as needed (up to 3 inches / 76mm) to securely fasten the heater around the drum. Ensure the heater fits snugly against the drum surface for optimal heat transfer.
- Connect Power: Plug the 6ft (1.8m) long power cord with its standard 3-prong plug (NEMA 5-15) into a properly grounded 120VAC electrical outlet. Ensure the outlet is capable of supplying 1000 watts.
- Verificazione iniziale: Before setting the temperature, ensure the heater is firmly attached and the power cord is not pinched or in contact with any hot surfaces.
5. Operating Instructions
The DHCS13 drum heater is equipped with an adjustable thermostat for precise temperature control.
- Ajustà u termostatu: Locate the adjustable thermostat dial on the heater. The thermostat has a temperature range of 50°F to 425°F (10°C to 218°C).
- Régler la température désirée : Rotate the dial to set the desired temperature for the contents of the drum. Start with a lower setting and gradually increase if higher temperatures are required.
- Monitor di Riscaldamentu: The heater will begin to warm the drum. The thermostat will cycle the heating element on and off to maintain the set temperature.
- Prutezzione di sopra-temperatura: The maximum exposure temperature on the heating surface is 450°F (232°C). The thermostat will prevent the surface from exceeding this temperature.
- Spegnimentu: To turn off the heater, unplug it from the power outlet.
Nota: The actual temperature of the drum contents may vary based on ambient temperature, drum material, and the specific properties of the material being heated. It is recommended to monitor the internal temperature of the drum contents, especially for temperature-sensitive materials.
6. Mantenimentu
Regular maintenance ensures the longevity and safe operation of your BriskHeat DHCS13 drum heater.
- Pulizia: Disconnect the heater from power before cleaning. Use a damp cloth to wipe down the exterior of the heater. Do not use abrasive cleaners or solvents that could damage the silicone rubber.
- Ispezione: Periodically inspect the heater for any signs of wear, damage, or fraying of the power cord. Check the integrity of the silicone rubber and the spring closure mechanism.
- Conservazione: When not in use, store the heater in a clean, dry place, away from direct sunlight and extreme temperatures.
- Riparazioni: Do not attempt to repair damaged components yourself. Contact BriskHeat customer support or a qualified technician for repairs.
7. Risoluzione di prublemi
If you encounter issues with your DHCS13 drum heater, refer to the following common troubleshooting steps:
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| Heater not warming up. | Nisuna putenza à l'unità. Thermostat impostatu troppu bassu. Prese elettrica difettosa. | Check if the heater is plugged in. Aumentà u paràmetru di u termostatu. Pruvate l'outlet cù un altru dispositivu o pruvate un outlet differente. |
| U riscaldatore ùn ghjunghje micca à a temperatura desiderata. | Thermostat impostatu troppu bassu. Drum contents too cold or large volume. Poor contact with drum surface. | Aumentà u paràmetru di u termostatu. Allow more time for heating, or consider additional insulation for the drum. Ensure the heater is snugly secured around the drum. |
| U riscaldatore s'accende è si spegne spessu. | Normal operation (thermostat maintaining temperature). Thermostat sensor issue. | This is typically normal. If cycling is excessive or erratic, contact support. |
| Visible damage to heater or cord. | Danni fisichi. | Immediately disconnect power. Do not use. Contact BriskHeat for repair or replacement. |
If the problem persists after attempting these solutions, please contact BriskHeat customer support.
8. Specificazioni
| Attributu | Valore |
|---|---|
| Numero di mudellu | DHCS13 |
| Capacità di tamburi | 30-Gallon (114L) Metal Drums |
| Voltage | 120VAC |
| Watts | 1000 W |
| Gamma di temperatura di u termostatu | 50 °F à 425 °F (10 °C à 218 °C) |
| Maximum Exposure Temperature (Heating Surface) | 450 ° F (232 ° C) |
| Materiale | 2-Layer Fiberglass Reinforced Silicone Rubber |
| Forza dielettrica | 2000V |
| Dimensioni (L x L) | 4 in (102 mm) x 58.5 in (1496 mm) |
| Diameter (for drum) | 18.6 in (473 mm) |
| Lunghezza di u cordone di alimentazione | 6 piedi (1.8 m) |
| Tipu di Plug | Standard 3-prong (NEMA 5-15) |
| Metà a terra | A terra |
9. Garanzia è Support
BriskHeat products are manufactured to the highest quality standards. For information regarding product warranty, please refer to the warranty statement provided with your purchase or visit the official BriskHeat websitu.
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact BriskHeat customer support:
- Produttore: BriskHeat
- Informazioni di cuntattu: Refer to the BriskHeat websitu o imballaggio di u pruduttu per i dettagli di cuntattu più recenti.
