Manuale d'usu di l'altoparlanti acquatichi Bluetooth Hype HY-BTWTR-BLK Hydro Sound

1. Introduzione

Grazie per l'acquistuasing the Hype HY-BTWTR-BLK Hydro Sound Bluetooth Water Dancing Speakers. These speakers combine high-quality audio with a dynamic water and light show, enhancing your listening experience. This manual provides essential information for the safe and efficient operation of your new speakers.

2. Informazioni di sicurezza

• Leghjite attentamente tutte l'istruzzioni prima di l'usu.
• Do not expose the speakers to extreme temperatures, direct sunlight, or high humidity.
• Keep the speakers away from water sources to prevent electrical shock, as they are not waterproof.
• Do not attempt to disassemble or modify the speakers. This will void the warranty and may cause damage.
• Aduprate solu u cavu di carica furnitu o un equivalente certificatu.
• Mantene fora di a portata di i zitelli.

3. Cuntenutu di u pacchettu

Verificate u pacchettu per i seguenti elementi:

• Hype Hydro Sound Bluetooth Water Dancing Speakers (2 units)
• Cavu di carica USB
• Cavo audio da 3.5 mm
• Manuale d'uso (stu documentu)

4. Produttu Finituview

Familiarize yourself with the components of your Hype Water Dancing Speakers.

Image 1: Front View of Speakers. This image displays the front of two Hype Hydro Sound Bluetooth Water Dancing Speakers. Each speaker features a clear, conical top housing the water and light elements, and a black base containing the speaker driver and control button. The water jets are visible within the clear section, ready to synchronize with audio.

Imagine 2: Indietro View of Speaker. This image shows the rear panel of one Hype Hydro Sound Bluetooth Water Dancing Speaker. From left to right, the visible ports and controls include a 5V DC charging input, an AUX input for wired connections, and a power switch/button. These elements facilitate charging and connectivity options for the speaker.

Cumpunenti di u parlante:

• Water Jet Chamber: Clear top section where water and LED lights create the dancing effect.
• Driver di parlante: Located in the base for audio output.
• Pulsante di putenza: Turns the speakers on/off.
• Ingressu 5V DC: Per carica a batteria interna.
• Ingressu AUX: For wired audio connection using the 3.5mm cable.

5. Setup

5.1 Caricamentu di l'altoparlanti

1. Connect the small end of the USB charging cable to the 5V DC input port on the back of one speaker.
2. Cunnette l'estremità più grande di u cavu USB à un adattatore di alimentazione USB (micca inclusu) o à a porta USB di un urdinatore.
3. A luce indicatrice di carica (s'ella hè presente) s'illuminarà durante a carica è si spegnerà quandu hè cumpletamente carica.
4. A full charge typically takes 2-3 hours and provides approximately 5 hours of playback.

Nota: Both speakers are powered by a single connection. Ensure both speakers are connected to each other via the integrated cable for full functionality.

5.2 Accensione / spegnimentu

• To power on, press and hold the Power button on the main speaker until you hear an audible prompt or see an indicator light.
• Per spegne, appughjà è tene premutu di novu u buttone di accensione.

6. Operating Instructions

6.1 Accoppiamentu Bluetooth

1. Ensure the speakers are powered on and within 10 meters (33 feet) of your Bluetooth-enabled device.
2. The speakers will automatically enter pairing mode, indicated by a flashing LED light.
3. On your device (smartphone, tablet, laptop), go to the Bluetooth settings and search for available devices.
4. Select "HY-BTWTR-BLK" or a similar name from the list.
5. Una volta assuciatu, sentirete un sonu di cunferma, è a luce LED smetterà di lampeggià.
6. The speakers will automatically reconnect to the last paired device when powered on, if the device's Bluetooth is active and within range.

6.2 Cunnessione d'entrata AUX

Per i dispusitivi senza Bluetooth o per una cunnessione cablata:

1. Connect one end of the 3.5mm audio cable to the AUX input port on the back of the speaker.
2. Cunnette l'altra estremità di u cavu audio di 3.5 mm à a presa per cuffie o à l'uscita audio di u vostru dispositivu.
3. The speakers will automatically switch to AUX mode.

6.3 Music Playback and Water Dancing

• Once connected via Bluetooth or AUX, start playing music on your connected device.
• The water jets inside the speakers will begin to dance and light up in multiple colors, synchronizing with the beat and volume of the music.
• Adjust the volume from your connected device.

7. Mantenimentu

• Pulizia: Use a soft, dry cloth to wipe the exterior of the speakers. Do not use abrasive cleaners or allow water to enter any openings.
• Conservazione: When not in use for extended periods, store the speakers in a cool, dry place away from direct sunlight.
• Cura di a batteria: To prolong battery life, fully charge the speakers before storing them for long periods and recharge them every 3-6 months.

8. Risoluzione di prublemi

9. Specificazioni

• Mudellu: HY-BTWTR-BLK
• Tipu di parlante: Desktop
• Connettività: Bluetooth, 3.5 mm AUX
• Dispositivi cumpatibili: Ordinatore portatile, Smartphone, Tablet
• Culore: Neru
• Pesu di u produttu: 200 grammi
• Impermeabile: Innò
• Fonte di energia: Batteria interna ricaricabile
• Wattage: 3 Watt
• Durata media di a batteria: Finu à 5 ore
• Dimensioni di u pruduttu: 10 x 4 x 4 cm (per speaker, approximate)

10. Garanzia è Support

Hype products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your original packaging for specific terms and conditions.

For technical support, warranty claims, or further assistance, please contact Hype customer service through their official websitu o u rivenditore induve u pruduttu hè statu acquistatu. Conservate a vostra prova d'acquistu per a validazione di a garanzia.