AMS F5962

AMS F5962 Radio-Controlled Wall Clock User Manual

Modelu: F5962

1. Introduzione

Thank you for choosing the AMS F5962 Radio-Controlled Wall Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new clock. Please read these instructions carefully before use and retain them for future reference.

2. Produttu Finituview

The AMS F5962 is a radio-controlled wall clock featuring an antique-style beige dial with dark brown Arabic numerals. Its painted metal housing ensures durability, and the radio-controlled movement provides accurate timekeeping by automatically synchronizing with a time signal.

AMS F5962 Radio-Controlled Wall Clock front view

Figura 1: Fronte view of the AMS F5962 Radio-Controlled Wall Clock, showcasing its antique-style beige dial and dark brown Arabic numerals.

3. Cuntenutu di u pacchettu

Please check the package contents upon unpacking. Ensure all items are present and undamaged.

4. Setup

4.1 Installazione di batterie

  1. Truvate u compartmentu di a bateria in u spinu di u clock.
  2. Insert one AA (or specified type) battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
  3. Chiudere in modu sicuru u coperchiu di u compartimentu di a batteria.

Impurtante: Use only the recommended battery type. Remove depleted batteries promptly to prevent leakage.

4.2 Sincronizazione iniziale di u tempu

After battery installation, the clock will automatically attempt to receive the radio time signal.

  1. Place the clock near a window or in an open area, away from electronic devices that may cause interference.
  2. The hands will typically move to the 12 o'clock position and then begin searching for the signal.
  3. This process can take several minutes to several hours, depending on signal strength and location. Once the signal is received, the clock will automatically set itself to the correct time.

Nota: If the clock does not set itself after a few hours, try repositioning it or manually initiating a signal search if your model has that feature (refer to troubleshooting).

4.3 Muntaggio di l'orologio

The AMS F5962 is designed for indoor wall mounting.

  1. Choose a suitable location on an indoor wall, ensuring it is sturdy enough to support the clock's weight (approximately 1.22 kg).
  2. Install a nail or wall anchor with a screw, ensuring it protrudes sufficiently (at least 2 cm) to securely hold the clock.
  3. Hang the clock using the hanging mechanism on the back.
AMS F5962 Wall Clock with dimensions

Figure 2: The AMS F5962 Wall Clock showing its approximate dimensions of 32cm diameter. The overall product dimensions are 35.4 x 35.2 x 7.4 cm.

5. Operating Instructions

Once set up, the AMS F5962 operates automatically.

6. Mantenimentu

6.1 Pulizia

To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or internal components.

6.2 Sustituzione di batterie

When the clock hands stop moving or the time becomes inaccurate, it is likely time to replace the battery.

  1. Eliminate a vechja bateria da u compartment.
  2. Insert a new, fresh battery of the correct type (e.g., AA), observing polarity.
  3. The clock will then attempt to re-synchronize with the radio signal as described in Section 4.2.

Nota ambientale: Please dispose of used batteries responsibly according to local regulations.

7. Risoluzione di prublemi

PrublemuCausa PossibileSoluzione
Clock hands do not move or stop.Batteria scarica.Sustituisce a bateria cù una nova.
Clock does not set to the correct time.
  • Weak or no radio signal.
  • Interferenza da altre elettronica.
  • Incorrect time zone setting (if applicable, though this model is typically automatic).
  • Move the clock to a different location, preferably near a window and away from electronic devices.
  • Allow several hours for the clock to receive the signal.
  • Assicuratevi chì a batteria sia fresca.
Time is incorrect after DST change.Clock did not receive the DST signal.
  • The clock should automatically adjust. If not, try removing the battery for a few minutes and reinserting it to force a re-synchronization.
  • Ensure the clock is in a location with good signal reception.

8. Specificazioni

MarcaAMS
Numero di mudelluF5962
Tipu di visualizazioneAnalogicu
Funzione specialeRadio-Controlled Time Synchronization
MaterialeMetallu dipintu
CuloreBeige (dial), Brown (housing)
StileAnticu
Dimensioni di u produttu35.4 x 35.2 x 7.4 cm (Overall); Case diameter 32cm
Pesu di l'articulu1.22 kg
Fonte d'energiaAlimentatu à batteria
Usu Indoor / OutdoorInternu

9. Garanzia è Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. You may also visit the official AMS websitu per più assistenza.

Documenti cunnessi - F5962

Preview AMS 5898 / 5893 Radio-Controlled Clock User Manual
Detailed instructions for setting up and operating the AMS 5898 and AMS 5893 radio-controlled clocks, including time setting, alarm functions, temperature display, and maintenance.
Preview AMS Wall Clock Operating Instructions
Operating instructions for AMS wall clocks, covering battery installation, replacement, and general usage in multiple languages.
Preview ams AS5600L Adapter Board Eval Kit Manual
This manual provides comprehensive information for the ams AS5600L-WL_EK_AB adapter board, including kit contents, board description, mounting instructions, pinout details, I2C mode operation, hardware schematics, PCB layout, and ordering information.
Preview Manuale d'usu di u sensore di pusizione rotativu ams AS5048 à 14 bit
Stu manuale d'usu furnisce infurmazioni dettagliate nantu à l'ams AS5048, un sensore di pusizione rotativu di 14 bit cù angulu digitale è uscita PWM. Copre a scheda adattatore AS5048, u montaggio, u pinout, i casi di funziunamentu (SPI, Daisy Chain), a codificazione di u firmware ex.ampfile è schemi hardware. Essenziale per l'ingegneri chì integranu stu sensore in i so sistemi.
Preview ams AS5048 Adapter Board Evaluation Kit Manual
This manual details the ams AS5048 Adapter Board (AS5048-EK-AB), an evaluation kit for the AS5048 magnetic position sensor. It covers hardware, operation modes (SPI, I2C), software examples, and contact information for ams AG.
Preview AMS Clock Operating Instructions and Battery Replacement Guide
Instructions for operating and replacing the battery in AMS clocks, with multilingual guidance.