Introduzione
This manual provides essential instructions for the setup, operation, and maintenance of your Datalogic Heron HD3130-BK 1D Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
Cuntenutu di u pacchettu
- Datalogic Heron HD3130-BK 1D Barcode Scanner
- Scanner Stand
- (USB) Connection Cable (sold separately or included depending on package)
- Documentazione (stu manuale)
Note: The connection cable is required for operation and may be sold separately.
Istituisci
Follow these steps to set up your Datalogic Heron HD3130-BK barcode scanner:
- Disimballà u scanner: Carefully remove the scanner and its stand from the packaging.
- Assemblate u Stand: If the stand is not pre-assembled, attach the scanner to the stand base according to the visual guide below. Ensure it is securely fastened.
- Cunnette u cable: Insert one end of the USB connection cable into the port at the base of the scanner. Connect the other end of the USB cable to an available USB port on your computer (desktop or laptop).
- Power On: The scanner is powered via the USB connection. Once connected, it should power on automatically.
- Installazione di driver (se necessariu): In most cases, the scanner will be recognized as a standard HID keyboard device and will not require specific driver installation. If prompted, follow your operating system's instructions for new hardware detection.
This image displays the Datalogic Heron HD3130-BK 1D Barcode Scanner in black, positioned on its included stand. The scanner features a sleek, ergonomic design, suitable for both handheld and presentation scanning.
Istruzzioni di funziunamentu
The Datalogic Heron HD3130-BK is designed for efficient 1D barcode scanning. It supports both handheld and presentation modes.
Scanning Handheld
- Pick Up the Scanner: Remove the scanner from its stand.
- Mira è scansione: Point the scanner's window at the 1D barcode you wish to read. Ensure the red aiming line covers the entire barcode.
- Confirm Scan: A successful scan is typically indicated by an audible beep and/or a visual confirmation (e.g., a green light). The scanned data will be transmitted to your connected computer as keyboard input.
Presentation Scanning (using the stand)
- Articulu di locu: Position the barcode of the item in front of the scanner's window while it is in its stand.
- Rilevazione automatica: The scanner will automatically detect and read the barcode when it is presented correctly within its field of view.
- Confirm Scan: A successful scan is indicated by an audible beep and/or visual confirmation.
The scanner is capable of processing approximately 270 scans per second, ensuring quick and efficient data capture.
Mantenimentu
Una manutenzione adatta assicura a longevità è e prestazioni ottimali di u vostru scanner.
- Pulizia: Aduprate un panno morbido e senza pelucchi leggermente dampened with water or a mild, non-abrasive cleaner to wipe the scanner's exterior and scan window. Do not use harsh chemicals or abrasive materials.
- Conservazione: Quandu ùn hè micca in usu, cunservate u scanner in un ambiente pulitu è asciuttu, luntanu da a luce diretta di u sole è da temperature estreme.
- Cura di u cable: Avoid bending or twisting the USB cable excessively. Ensure it is not pinched or placed under heavy objects.
Risoluzione di prublemi
If you encounter issues with your Datalogic Heron HD3130-BK scanner, refer to the following common problems and solutions:
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| U scanner ùn s'accende micca. | USB cable not connected or faulty. | Assicuratevi chì u cavu USB sia cunnessu currettamente à u scanner è à l'urdinatore. Pruvate una porta USB o un cavu differente. |
| U scanner ùn legge micca i codici à barre. | Barcode damaged, incorrect aiming, or scanner settings. | Ensure the barcode is clean and undamaged. Aim the red line directly across the barcode. Check if the scanner is configured for the specific barcode symbology (e.g., UPC-A, Code 39). |
| I dati scansionati appariscenu in modu incorrectu. | Keyboard layout mismatch or scanner configuration. | Verify your computer's keyboard layout matches the scanner's configured output. Refer to the full product manual for advanced configuration options. |
| Scanner beeps but no data is transmitted. | Application not in focus or incorrect interface mode. | Ensure the cursor is in the desired input field of your application. Confirm the scanner is operating in HID keyboard emulation mode. |
For more detailed troubleshooting or advanced configuration, please refer to the comprehensive Datalogic Heron HD3130 product manual available on the official Datalogic websitu.
Specificazioni
| Feature | Detail |
|---|---|
| Numero di mudellu | HD3130-BK |
| Tipu di scanner | Scanner di 1code à barre |
| Scan Rate | 270 scans / secondu |
| Tecnulugia di cunnessione | Cavu USB |
| Fonte d'energia | Elettricu cù filu (via USB) |
| Dispositivi compatibles | Desktop, Laptop |
| Pesu di l'articulu | 1.28 libbre (circa 0.58 kg) |
| Dimensioni di u produttu | 7.5 x 8.8 x 4.1 pollici (circa 19.05 x 22.35 x 10.41 cm) |
| U fabricatore | Datalogic |
| Numeru d'Identificazione di u Cummerciu Globale (GTIN) | 05054629213858 |
Garanzia è Supportu
Datalogic products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty statement included with your purchase or visit the official Datalogic websitu.
For technical support, service, or to inquire about additional accessories, please contact Datalogic customer support through their official channels. You may need your product model number (HD3130-BK) and serial number (if applicable) when contacting support.
Risorse in linea: For the most up-to-date documentation, drivers, and software, please visit the Datalogic Official Websitu.
