Introduzione
The BRESSER Temeo Quadro Temperature Station is designed to monitor temperature and humidity at up to four different locations simultaneously. This system includes a main display unit and three remote sensors, allowing you to track environmental conditions both indoors and outdoors, or in various rooms of your home. The remote sensors transmit data wirelessly to the main unit via a 433 MHz radio signal.
Informazioni di sicurezza
- Leghjite attentamente tutte e struzzioni prima di utilizà u dispusitivu.
- Mantene stu manuale per riferimentu futuru.
- Ùn espone micca u dispusitivu à temperature estreme, à a luce diretta di u sole o à alta umidità.
- Evite di abbandunà o sottumette u dispusitivu à forti impatti.
- Ùn pruvate micca di smuntà o riparà u dispusitivu da per voi. Cuntattate u persunale di serviziu qualificatu.
- Eliminate e batterie usate in modu responsibile secondu e regulazioni lucali.
Cuntenutu di u pacchettu
- 1x BRESSER Temeo Quadro Main Display Unit
- 3x Remote Sensors
- 1x Manuale d'usu (stu documentu)
Note: Batteries are not included. The main unit requires 3x AAA (LR03) batteries, and each remote sensor requires 2x AAA (LR03) batteries.
Product Overview
Unità di visualizazione principale
Image: Fronte view of the BRESSER Temeo Quadro main unit display. A clear view of the main unit's LCD screen, showing temperature and humidity values for four channels.
Image: daretu view of the BRESSER Temeo Quadro main unit, showing control buttons and battery compartment. The back of the main unit includes buttons for 'CHANNEL', 'ALARM', 'MAX/MIN', and 'SET', along with the battery compartment cover.
- Display LCD: Shows temperature and humidity for the main unit (IN) and up to three remote sensors (1, 2, 3).
- Buttone CANALE: Selects which remote sensor's data is displayed or cycles through channels.
- Pulsante ALARM: Activates/deactivates temperature/humidity alarms.
- Pulsante MAX/MIN: Mostra i valori massimi è minimi registrati.
- Pulsante SET: Enters setup mode for time, date, and alarm settings.
- Compartimentu di batterie: Located on the rear, for 3x AAA batteries.
- Supportu integratu: Per u piazzamentu di u desktop.
Sensore Remote
Image: BRESSER Temeo Quadro remote sensor, front and back views. A remote sensor unit, showing its display on the front and the battery compartment and mounting hole on the back.
- Display LCD: Shows its current temperature and humidity.
- Cambia di canale: Allows selection of channel 1, 2, or 3.
- Compartimentu di batterie: For 2x AAA batteries.
- Fora di muntatura: Per u muru.
Istituisci
1. Installazione di batterie
- For Remote Sensors:
- Open the battery compartment cover on the back of each remote sensor.
- Insert 2x AAA (LR03) batteries into each sensor, observing the correct polarity (+/-).
- Set the channel switch (1, 2, or 3) on each sensor to a unique channel.
- Chiudere a tappa di u compartimentu di a batteria.
- For Main Display Unit:
- Aprite u coperchiu di u compartimentu di a batteria situatu in u spinu di l'unità principale.
- Insert 3x AAA (LR03) batteries, observing the correct polarity (+/-).
- Close the battery compartment cover. The main unit will power on and begin searching for sensor signals.
2. Accoppiamentu di sensori
- After installing batteries in both the sensors and the main unit, the main unit will automatically attempt to connect with the remote sensors.
- Ensure the remote sensors are within range (typically up to 30 meters in open air) of the main unit during initial setup.
- The corresponding channel numbers (1, 2, 3) on the main unit's display will show readings once a connection is established. The 'IN' channel displays the main unit's internal readings.
- If a sensor does not connect, remove and reinsert its batteries, then press the 'CHANNEL' button on the main unit to initiate a new search.
3. Piazzamentu
- Place the main unit indoors in a central location, away from direct sunlight or heat sources.
- Position remote sensors in desired monitoring areas. For outdoor use, place sensors in a sheltered spot to protect them from direct rain and sun, which can affect accuracy and device longevity.
Istruzzioni di funziunamentu
Viewa temperatura è l'umidità
- The main display unit continuously shows the current temperature and humidity for the internal sensor ('IN') and the three remote sensors (1, 2, 3).
- The display also indicates comfort levels (e.g., 'COM' for comfortable, 'DRY' for dry, 'WET' for wet) based on humidity levels.
MAX/MIN Records
- Press u MAX/MIN button once to display the maximum temperature and humidity recorded since the last reset.
- Press u MAX/MIN button a second time to display the minimum temperature and humidity recorded.
- To clear the MAX/MIN records, press and hold the MAX/MIN button for approximately 3 seconds while MAX or MIN values are displayed.
Selezzione di l'unità di temperatura (°C/°F)
- On the main unit, press the SET button to toggle between Celsius (°C) and Fahrenheit (°F).
Setting Alarms (if applicable)
- Press u ALLARME buttone per entre in u modu di cunfigurazione di l'alarma.
- Aduprà u CANALE è MAX/MIN buttons to adjust the desired high and low temperature/humidity alarm thresholds for each channel.
- Press ALLARME again to confirm settings and activate the alarm. An alarm icon will appear on the display.
- When an alarm threshold is met, the unit will emit an audible alert and the corresponding channel's reading will flash.
Mantenimentu
- Pulizia: Asciugà u dispusitivu cù un soft, damp tela. Ùn aduprate micca detergenti abrasivi o solventi.
- Sustituzione di batterie: Rimpiazzate e batterie quandu l'indicatore di batteria bassa appare nantu à u display. Rimpiazzate sempre tutte e batterie in un apparecchiu à u listessu tempu.
- Conservazione: Sè vo conservate u dispusitivu per un periodu prolongatu, cacciate tutte e batterie per impedisce perdite.
Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| Nisuna visualizazione nant'à l'unità principale. | E batterie sò morte o inserite in modu incorrectu. | Verificate a polarità di a batteria è rimpiazzatela cù batterie AAA nove. |
| Remote sensor not displaying data on main unit. | Sensor out of range, incorrect channel setting, or dead batteries. |
|
| Letture imprecise. | Sensore espostu à a luce diretta di u sole, fonti di calore o umidità. | Relocate sensors to a more appropriate, sheltered environment. Allow time for readings to stabilize. |
| Perdita di signale intermittente. | Interference from other electronic devices or physical obstructions. | Move the main unit or sensors away from potential sources of interference (e.g., TVs, microwaves, large metal objects). |
Specificazioni
| Numero di mudellu | 7000020CM3000 |
| Marca | BRESSER |
| Dimensioni di u produttu (unità principale) | 1.02 x 4.13 x 4.72 inch (2.59 x 10.49 x 11.99 cm) |
| Item Weight (Main Unit) | 0.19 chilogrammi (circa 6.7 once) |
| Temperature Range (Main Unit) | Internal sensor range not specified, but upper rating is 55 °C. |
| Precisione di a temperatura | ± 1 °C |
| Intervallu di Umidità | Not specified, but typically 20% to 95% for similar devices. |
| Frequenza wireless | 433 MHz |
| Fonte d'alimentazione (unità principale) | 3x AAA (LR03) batteries |
| Fonte d'alimentazione (sensore remoto) | 2x AAA (LR03) batteries per sensor |
| Number of Remote Sensors Supported | 3 |
Garanzia
This BRESSER product comes with a garanzia di dui anni against factory defects from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper use, accidents, unauthorized repairs, or normal wear and tear.
Supportu
For technical support, warranty claims, or further information, please visit the official BRESSER website or contact their customer service department. Refer to the packaging or the BRESSER websitu per i dettagli di cuntattu più recenti.
Online resources may include FAQs, additional manuals, and contact forms.