URMET Artico Bracket for 2GO! System

1. Introduzione

This manual provides detailed instructions for the installation, usage, and maintenance of the URMET Artico Bracket, model 1705/82. This bracket is specifically designed to integrate with the URMET 2GO! system, providing a secure and stable mounting solution for compatible devices.

Please read this manual carefully before proceeding with installation to ensure proper setup and safe operation.

2. Informazioni di sicurezza

• Always disconnect power to the installation area before beginning any work.
• Assicuratevi chì tutte e cunnessione sianu sicure è bè insulate per prevene i periculi elettrichi.
• Aduprate strumenti adattati per a stallazione.
• If you are unsure about any part of the installation process, consult a qualified electrician or technician.
• Mantene u pruduttu fora di a portata di i zitelli.

3. Cuntenutu di u pacchettu

Verificate chì tutti i cumpunenti sò presenti in u pacchettu:

• 1 x URMET Artico Bracket (Model 1705/82)
• Mounting screws and wall plugs (quantity may vary)
• Stu manuale d'istruzzioni

4. Setup è Installazione

The URMET Artico Bracket 1705/82 is designed for easy installation. Follow these steps carefully:

1. Sceglie u locu di muntatura: Select a suitable, stable surface for mounting the bracket. Ensure there is enough space for the device that will be attached to the bracket and that the location allows for proper wiring if applicable.
2. Marcate i punti di perforazione: Hold the bracket against the chosen surface and use a pencil to mark the positions for the mounting screws. Ensure the bracket is level before marking.
3. Fori: Using an appropriate drill bit for your wall type, drill holes at the marked positions. The depth and diameter of the holes should match the provided wall plugs.
4. Inserite i tasselli murali: Insert the wall plugs into the drilled holes until they are flush with the surface.
5. Assicurà u supportu: Align the bracket with the wall plugs and insert the mounting screws. Tighten the screws firmly until the bracket is securely fastened to the wall. Do not overtighten.
6. Attach 2GO! System Device: Once the bracket is securely mounted, attach the compatible URMET 2GO! system device to the bracket according to the device's specific instructions. Ensure it clicks or locks into place if designed to do so.

Figure 1: Illustration of the URMET Artico Bracket 1705/82 during installation, showing screw points.

5. Usu

The URMET Artico Bracket 1705/82 serves as a dedicated mounting accessory for specific components of the URMET 2GO! system. Once installed, it provides a stable and secure base for the intended device. Ensure that the device is correctly seated and secured onto the bracket as per its own manual.

The bracket itself does not require any operational steps; its function is purely structural support.

6. Mantenimentu

The URMET Artico Bracket 1705/82 requires minimal maintenance.

• Pulizia: Periodically wipe the bracket with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
• Ispezione: Occasionally check the mounting screws to ensure they remain tight. If the bracket appears loose, gently tighten the screws.
• Dannu: If the bracket shows signs of damage or wear, it should be replaced immediately to ensure the safety and stability of the mounted device.

7. Risoluzione di prublemi

Most issues related to the Artico Bracket are installation-related.

• Bracket is Loose:
  • Ensure mounting screws are fully tightened.
  • Verify that the wall plugs are correctly seated and appropriate for the wall material.
  • If the wall material is weak, consider using stronger wall anchors or relocating the bracket.
• Device Does Not Fit on Bracket:
  • Confirm that the device you are trying to mount is compatible with the URMET Artico Bracket 1705/82 and the 2GO! system.
  • Check for any obstructions or incorrect alignment during attachment.

8. Specificazioni

9. Garanzia infurmazione

URMET products are covered by a standard manufacturer's warranty. For specific details regarding the warranty period and terms for the Artico Bracket 1705/82, please refer to the warranty card included with your purchase or visit the official URMET websitu. Conservate a vostra prova d'acquistu per e richieste di garanzia.

10. Assistenza Clienti

If you have any questions, require technical assistance, or need to report a problem with your URMET Artico Bracket 1705/82, please contact URMET customer support. Contact information can typically be found on the official URMET websitu o nantu à l'imballu di u pruduttu.

Official URMET Websitu: www.urmet.com

11. Video di u produttu

No official product videos specifically detailing the installation or features of the URMET Artico Bracket 1705/82 were found from the seller. Please refer to the written instructions and diagrams provided in this manual for guidance.