Manuale d'usu di MIDAS DM16

1. Introduzione

This manual provides comprehensive instructions for the operation and maintenance of your MIDAS DM16 16 Input Analogue Live and Studio Mixer. The DM16 is designed for both live performance and studio recording environments, featuring award-winning MIDAS microphone preamplifiers and robust construction.

Please read this manual thoroughly before operating the device to ensure proper usage and to maximize its lifespan.

Figura 1.1: Angulu frontale view of the MIDAS DM16 mixer.

2. Setup

2.1 Unpacking è Inspection

Upon receiving your MIDAS DM16, carefully unpack the unit and inspect it for any signs of damage that may have occurred during transit. Retain the original packaging materials for future transport or storage.

Inclusu in a scatula:

• MIDAS DM16 16-Input Analogicu Live è Mixer Studio
• Cordone d'alimentazione
• Manuale d'uso (stu documentu)

2.2 Cunnessione di putenza

The DM16 operates on a standard AC power supply. Connect the provided power cord to the AC inlet on the rear panel of the mixer and then to a suitable power outlet. Ensure the power switch is in the 'Off' position before connecting to power.

Figure 2.1: Rear panel of the MIDAS DM16 showing power input and warnings.

2.3 Connessioni di Input è Output

The DM16 features a variety of input and output options for connecting microphones, instruments, and other audio devices.

• Ingressi di microfonu: 12 mono input channels with XLR connectors for microphones. These channels feature MIDAS microphone preamplifiers.
• Ingressi di linea: 2 electronically-balanced stereo line input channels on 1/4" TRS connectors for instruments or line-level devices.
• Outputs principali: Connect to your main PA system or recording interface.
• Inviate Aux: For monitor mixes or effects sends.
• Output per cuffie: Per u monitoraghju di l'audio.

Figura 2.2: Top view of the MIDAS DM16 showing all input/output connections and controls.

3. Operating Instructions

3.1 Cuntrolli di Canali

Each mono input channel on the DM16 features the following controls:

• GAIN: Adjusts the input sensitivity for the microphone preamppiù vivu.
• EQ: A 3-band equalizer with a swept mid-band for precise tone shaping.
  

  Figura 3.1: Detailed view of the 3-band EQ section on a mono channel.

• AUX 1/2: Controls the level sent to the auxiliary outputs. These can be switched pre/post fader.
  

  Figure 3.2: Aux masters section with pre/post fader switching.

• PAN: Ajusta a pusizione stereo di u canale.
• MUTE: Silences the channel.
• LED PEAK: Indicates when the input signal is clipping.
• FADER: Controls the output level of the channel to the main mix.
  

  Figure 3.3: Channel faders for precise level control.

3.2 Alimentazione Phantom

The DM16 provides +48V phantom power for condenser microphones. This is a global switch, meaning it applies to all microphone inputs simultaneously. Ensure all connections are made before activating phantom power to prevent damage to non-phantom powered devices.

Figure 3.4: Phantom power switch.

3.3 Surviglianza

Use the headphone output and monitor controls to listen to the main mix or specific auxiliary sends. The monitor section includes controls for local monitor and phones output levels.

Figure 3.5: Monitor and headphone controls.

4. Mantenimentu

Proper maintenance ensures the longevity and optimal performance of your MIDAS DM16 mixer.

• Pulizia: Use a soft, dry cloth to clean the exterior of the mixer. Avoid abrasive cleaners or solvents that could damage the finish or controls.
• Prutezzione di polvera: Keep the mixer covered when not in use to prevent dust accumulation, especially around faders and knobs.
• Ventilazione: Assicuratevi un flussu d'aria adeguatu intornu à l'unità per impedisce u surriscaldamentu. Ùn bluccate micca l'aperture di ventilazione.
• Conservazione: Store the mixer in a cool, dry environment away from direct sunlight and extreme temperatures.

5. Risoluzione di prublemi

This section addresses common issues you might encounter with your DM16 mixer.

• Nisun putere:
  • Check if the power cord is securely connected to both the mixer and the power outlet.
  • Verificate chì a presa di corrente hè funziunale.
  • Ensure the power switch on the rear panel is in the 'On' position.
• Nisuna uscita di sonu:
  • Check all input and output cable connections.
  • Ensure channel faders and the main mix fader are raised.
  • Verify that the MUTE buttons on active channels are not engaged.
  • Check the gain settings for each channel.
  • Confirm that your connected speakers or monitoring system are powered on and functioning correctly.
• Sonu distortu:
  • Reduce the GAIN setting on the input channel if the PEAK LED is frequently illuminating.
  • Lower the output level of the connected source device.
  • Verificate s'ellu ci sò cavi difettosi.
• Ronzio o rumore:
  • Assicuratevi chì tutti i cavi sianu schermati currettamente è in bonu statu.
  • Verificate s'ellu ci sò circuiti di terra; pruvate à cunnette tutti l'apparecchi audio à a listessa presa multipla.
  • Keep audio cables away from power cables.

Sè avete prublemi chì ùn sò micca trattati quì, vi pregu di cunsultà a sezzione di supportu.

6. Specificazioni

7. Garanzia è Support

7.1 Garanzia infurmazione

Your MIDAS DM16 mixer is covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official MIDAS websitu per i termini è e cundizioni di garanzia dettagliate.

Nota: The warranty may not cover damage caused by improper use, unauthorized modifications, or natural disasters.

7.2 Assistenza Clienti

For technical assistance, troubleshooting, or service inquiries, please contact MIDAS customer support through their official websitu o l'infurmazioni di cuntattu furnite in a ducumentazione di u vostru pruduttu.

Risorse in linea:

• Official MIDAS Websitu: www.midasconsoles.com
• Product Support Page: (Specific link if available, otherwise general websitu)

When contacting support, please have your product model number (DM16) and serial number ready.