Aermec Omnia UL 36 C Blower Convector User Manual

1. Introduzione

Thank you for choosing the Aermec Omnia UL 36 C Blower Convector. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your unit. Please read these instructions carefully before using the appliance and keep them for future reference.

The Aermec Omnia UL 36 C is a versatile fan convector designed for residential use, capable of both heating and cooling. It features an electronic thermostat for precise control of fan speed and ambient temperature, and can operate efficiently at lower water temperatures (e.g., 50°C instead of 70°C for heating).

2. Informazioni di sicurezza

Osservate sempre e seguenti precauzioni di sicurezza per riduce u risicu di ferite, scosse elettriche, incendi o danni à l'apparecchiu.

• Ensure the unit is installed by qualified personnel in accordance with local regulations and this manual.
• Before any maintenance or cleaning, disconnect the unit from the main power supply.
• Ùn bluccate micca e griglie di presa o di uscita di l'aria.
• Mantene i zitelli è l'animali domestici luntanu da l'unità durante u funziunamentu.
• Do not insert objects into the unit openings.
• Se u cordone di alimentazione hè dannatu, deve esse rimpiazzatu da u fabricatore, u so agentu di serviziu, o persone simili qualificate per evità un periculu.
• Stu apparecchiu ùn hè micca destinatu à l'usu di e persone (cumpresi i zitelli) cù capacità fisiche, sensoriali o mentali ridotte, o mancanza di sperienza è cunniscenze, salvu ch'elli sò stati dati supervisione o struzzioni riguardanti l'usu di l'apparechju da una persona rispunsevuli di a so sicurità.

3. Produttu Finituview

The Aermec Omnia UL 36 C is a floor-standing blower convector designed for efficient climate control. It features a durable sheet steel casing in RAL 9002 white with a RAL 7044 grey base.

Funzioni chjave:

• Universal Line (UL) Fan Convector: Suitable for both horizontal and vertical installation.
• Termostatu elettronicu: Integrated for precise control of fan speed and ambient temperature.
• Heating and Cooling Capability: Operates efficiently in both heating and cooling modes.
• Riscaldamentu à bassa temperatura: Capable of heating with water temperatures as low as 50°C.
• Reversible Hydraulic Connections: Hydraulic fittings can be installed on either the left or right side.
• Funzionamentu silenziu: Designed for low noise levels.
• Filtrazione di l'aria: Equipped with a filter for air purification.

Cumpunenti:

• Fan convector unit with casing.
• Electronic thermostat.
• RAL 7044 base (ZU model).
• Air filter.

Image 1: Front view of the Aermec Omnia UL 36 C Blower Convector.

Imagine 2: Latu view of the Aermec Omnia UL 36 C Blower Convector.

4. Setup è Installazione

The Aermec Omnia UL 36 C is designed for straightforward installation. Refer to the packaging for detailed holder dimensions.

Opzioni di montaggio:

• Installazione di u pavimentu: The unit comes complete with a RAL 7044 base (ZU model) for stable floor mounting. Ensure the floor is level and capable of supporting the unit's weight (approximately 30 kg).
• Installazione murale: The Omnia UL series can also be installed vertically on a wall. An optional base plate (BC or BC20 kit) may be required for this configuration.
• Installazione suspesa: Un opzionale AMP kit is available for suspended installations.

Floor Installation Diagram Description: The diagram illustrates the unit placed on a floor, showing the base (ZU) providing stability. The unit's dimensions are clearly marked, indicating the overall footprint and height when installed on the floor.

Wall Installation Diagram Description: This diagram shows the unit mounted vertically on a wall. It highlights the mounting points and the required clearance from the floor and ceiling for optimal air circulation. The base plate (BC/BC20) is shown securing the unit to the wall.

Cunnessioni idrauliche:

The hydraulic fittings for water inlet and outlet can be installed on either the left or right side of the unit, offering flexibility during installation. Ensure all connections are secure and leak-free. The maximum operating pressure is 5 Bar.

5. Operating Instructions

The Aermec Omnia UL 36 C is equipped with an electronic thermostat for user-friendly control.

Termostatu elettronicu:

• The integrated electronic thermostat allows you to set the desired ambient temperature.
• It also controls the fan speed, which can be adjusted manually or set to an automatic mode.
• The thermostat can switch between heating and cooling modes based on the set temperature and the current room temperature.

Modi operativi:

• Modu di riscaldamentu: When the ambient temperature falls below the set temperature, the unit will activate heating.
• Modu di raffreddamentu: When the ambient temperature rises above the set temperature, the unit will activate cooling.
• Modu solu fan: The fan can operate independently without heating or cooling, providing air circulation.
• Modu automaticu: The unit automatically selects heating or cooling based on the set temperature and current room conditions.

6. Mantenimentu

Regular maintenance ensures optimal performance and longevity of your Aermec Omnia UL 36 C unit. Always disconnect power before performing any maintenance.

Pulizia di u ventilatore:

Periodically clean the fan blades to prevent dust accumulation, which can reduce efficiency and increase noise. Use a soft brush or vacuum cleaner to gently remove dust. Do not use abrasive cleaners or solvents.

Condensate Tray Cleaning:

During cooling operation, condensation collects in the tray. Regularly inspect and clean the condensate tray to prevent mold growth and blockages. A DSC display accessory is available for monitoring the condensate tray.

Pulizia di u filtru d'aria:

The air filter should be cleaned regularly, typically every 2-4 weeks depending on usage and air quality. Remove the filter, wash it with mild soap and water, rinse thoroughly, and allow it to dry completely before reinserting. Do not operate the unit without the filter.

7. Risoluzione di prublemi

If you encounter issues with your Aermec Omnia UL 36 C, refer to the following common troubleshooting steps:

• L'unità ùn si accende micca: Check if the unit is properly plugged into a power outlet. Verify the circuit breaker has not tripped. Ensure the thermostat is set to an active mode (heating or cooling) and the desired temperature is correctly set.
• Insufficient heating/cooling: Check if the air filter is clean. Ensure there are no obstructions to the air intake or outlet. Verify the thermostat settings are appropriate for the desired temperature. Check water flow to the unit.
• Rumore inusual: Ensure the unit is installed on a stable, level surface. Check for any loose components or debris in the fan area. If the noise persists, contact a qualified technician.
• Fuga d'acqua: Inspect hydraulic connections for leaks. Check the condensate drain line for blockages or disconnections.

For persistent problems or issues not covered here, please contact Aermec customer support or a qualified service technician.

8. Specificazioni

The following table provides general specifications for the Aermec Omnia UL 36 C.

Dati dimensionali:

The following table provides specific dimensional data for the Omnia UL 36 model.

Dimensional Diagram Description: This diagram visually represents the key dimensions of the Omnia UL unit, including its length, width, and height. It also illustrates the placement of the base (ZU) and the overall footprint for installation planning.

9. Garanzia è Support

Aermec provides a warranty for its products. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact Aermec directly. Aermec is known for providing warranty support throughout Italy.

For technical assistance, spare parts, or service inquiries, please contact Aermec customer support. In Italy, you can reach support at 800-843085.