1. Introduzione
This manual provides comprehensive instructions for the installation, operation, and maintenance of your AIBOO Linkable Under Cabinet LED Lighting System. This system features hardwired 12V slim aluminum dimmable puck lights with a wireless controller, designed for ambiance lighting in various indoor settings. Please read this manual thoroughly before installation and use.
2. Impurtante Information Safety
- Sicurezza elettrica: This product is designed for 110V/120Vac input and requires hardwiring. Installation should be performed by a qualified electrician or an individual with intermediate knowledge of electrical wiring to prevent electric shock or fire hazards. Ensure power is disconnected at the circuit breaker before any installation or maintenance.
- No Wall Plug: This system does NOT include a wall plug power adapter. It is intended for direct wiring into your electrical system.
- Solu l'usu di l'internu: This lighting system is designed for indoor use in dry locations. Do not expose to moisture or water.
- Ventilazione: Ensure adequate ventilation around the LED driver to prevent overheating.
- Compatibilità di cumpunenti: Use only the components provided or specified by AIBOO. Using incompatible parts may damage the system or pose a safety risk.
3. Cuntenutu di u pacchettu
Verificate chì tutti l'articuli elencati quì sottu sò inclusi in u vostru pacchettu:
- LED Puck Lights (6 units)
- RF Wireless Remote Control (1 unit)
- LED Controller (1 unit)
- 12V 1A Hardwired LED Driver (Power Adapter) (1 unit)
- Cavi di estensione di 5 piedi (2 unità)
- 6-Way Splitter (1 unit)
- Mounting Stickers (12 units)
- Viti di muntatura (12 unità)
4. Specifications Product
| Marca | AIBOO |
| Numero di mudellu | YK-300000197 |
| Colore di luce | 6000K Daylight White |
| Materiale | Metal (Puck Light Housing), Plastic (Shade) |
| Puck Light Dimensions | 2.36"L x 2.36"L x 0.31"A (6 cm x 6 cm x 0.8 cm) |
| Fonte d'energia | Elettricu cù filu (cablatu) |
| Voltage | 12 Volts (DC output from driver) |
| Tipu di fonte di luce | LED |
| Luminosità | 1200 Lumens (Total for 6 lights) |
| Funzioni spiciali | Dimmable, Linkable, Remote Control |
| Metudu di cuntrollu | Control remoto wireless RF |
| UPC | 712411875756 |
5. Setup è Installazione
Before beginning installation, ensure the main power supply to the installation area is turned off at the circuit breaker.
5.1 Schema di cablaggio sopraview
5.2 Hardwired Power Adapter Connection
The system includes a hardwired power adapter (LED Driver) designed to connect directly to a 110V/120Vac circuit. This adapter converts AC power to 12V DC for the LED lights. A wall plug is not included.
- Spegne l'alimentazione à l'interruttore principale.
- Connect the input wires of the LED driver to your 110V/120Vac circuit wiring. Ensure proper polarity (live to live, neutral to neutral, ground to ground) according to local electrical codes.
- Secure all connections with appropriate wire connectors.
5.3 Connecting the Puck Lights
The puck lights can be connected in two primary configurations: Series Connection or Parallel Connection.
5.3.1 Cunnessione seriale
In a series connection, the puck lights are linked one after another. This method is suitable for linear installations where lights are spaced evenly in a line.
- Connect the LED controller to the output of the hardwired LED driver.
- Connect the first puck light to the LED controller.
- Connect the subsequent puck lights to each other using their integrated cables.
- Use extension cords if additional length is required between lights.
5.3.2 Cunnessione Parallela
For installations requiring lights to branch out from a central point, the 6-way splitter allows for parallel connection.
- Connect the LED controller to the output of the hardwired LED driver.
- Connect the 6-way splitter to the LED controller.
- Connect individual puck lights to the available ports on the 6-way splitter.
- Use extension cords if additional length is required for individual lights.
5.4 Mounting the Puck Lights
The puck lights can be mounted using either the provided screws or adhesive stickers.
- Preparazione di a superficia: Assicuratevi chì a superficia di muntatura sia pulita, asciutta è liscia.
- Montaggio adesivo: Peel the backing from the adhesive sticker and firmly press the puck light onto the desired surface. Hold for 30 seconds to ensure a strong bond.
- Montaggio à viti: Use the provided screws to secure the puck lights to the surface. Pre-drilling pilot holes may be necessary depending on the material.
6. Operating Instructions
The AIBOO LED Lighting System is controlled by an RF wireless remote control.
6.1 Funzioni Control Remote
- ON/OFF: Press u ON button to turn the lights on, and the OFF buttone per disattivalli.
- Ajustamentu di luminosità:
- Press LIGHT + or LIGHT - to gradually increase or decrease brightness (stepless dimming).
- Aduprà u 100%, 50%, 25% buttons for quick brightness presets.
- Accoppiamentu: To pair the remote with the controller, press the Coppiu button within 5 seconds of powering on the lights until the lights flicker.
- Decoding (1 to More Pair): To pair one remote with multiple controllers, press the Decode button within 5 seconds of powering on the lights until the lights flicker.
- Funzioni di timing: Press 1H, 2H, 4H, o 8H to set the lights to automatically turn off after 1, 2, 4, or 8 hours, respectively.
7. Mantenimentu
The AIBOO LED Lighting System requires minimal maintenance.
- Pulizia: Ensure the lights are off and cool before cleaning. Wipe the puck lights and controller with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ispezione: Periodically check all connections for tightness and inspect cables for any signs of damage.
- Sustituzione di batterie: The remote control requires 1 CR2 battery. Replace the battery when the remote's range decreases or it stops responding.
8. Risoluzione di prublemi
If you encounter issues with your AIBOO LED Lighting System, refer to the following common problems and solutions:
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| I luci ùn si accendenu micca. | No power to the LED driver; Remote control battery is dead; Remote not paired; Loose connections. | Check circuit breaker. Replace remote battery. Re-pair remote (see Section 6.1). Verify all cable connections are secure. |
| Lights are flickering or strobing. | Too many lights connected to a single power supply; Faulty power supply. | Ensure no more than 6 lights are connected to one power supply. If flickering persists, inspect the power supply for signs of damage (e.g., warped casing, discoloration). A damaged power supply may need replacement. |
| U cuntrollu remoto ùn hè micca responsive. | Remote control battery is dead; Remote is out of range; Remote is not paired with the controller. | Replace the CR2 battery in the remote. Move closer to the LED controller. Re-pair the remote with the controller (see Section 6.1). |
| Lights do not dim or respond to brightness controls. | Remote not paired correctly; Controller malfunction. | Re-pair the remote (see Section 6.1). If the issue persists, contact customer support. |
9. Garanzia infurmazione
AIBOO products are manufactured to high-quality standards. For specific warranty details regarding your Linkable Under Cabinet LED Lighting System, please refer to the warranty card included with your purchase or visit the official AIBOO websitu. Conservate a vostra ricevuta d'acquistu cum'è prova d'acquistu per qualsiasi reclamu di garanzia.
10. Assistenza Clienti
For technical assistance, troubleshooting, or product inquiries, please contact AIBOO customer support.
- U.S. Live Customer Support: Da luni à venneri, 9 ore - 5 ore (EST)
- Risorse in linea: Visita u AIBOO Store on Amazon per infurmazioni supplementari nantu à u pruduttu è assistenza.
