Introduzione
The Midas 500 SERIES PARAMETRIC EQUALISER 512 is a compact 4-band fully parametric equalizer designed for professional audio applications. It is based on the acclaimed Midas HERITAGE 3000 console's equalizer section, known for its warm and responsive character.
This manual provides essential information for the proper setup, operation, and maintenance of your Midas 512 equalizer module.
Unpacking è cuntenuti
Carefully unpack your Midas 512 module and inspect it for any signs of damage. Retain the original packaging for future transport or storage.
U pacchettu deve cuntene i seguenti elementi:
- Midas 500 Series 4 Band Fully Parametric Equaliser 512 module
- Documentazione (stu manuale)
Image: Front view of the Midas 512 Parametric Equaliser module. This image displays the unit's blue faceplate, featuring four distinct sections for bass, low-mid, high-mid, and treble frequency bands. Each band includes controls for gain, frequency, and bandwidth (width), along with switches for bell or shelving responses on the bass and treble bands. An 'IN' button is visible at the bottom left.
Istituisci
The Midas 512 is a 500 Series module and requires a compatible 500 Series rack or chassis for operation. Ensure your rack provides adequate power and proper signal routing.
Installation into a 500 Series Rack
- Ensure the 500 Series rack is powered off before installation.
- Carefully align the module's edge connector with the corresponding slot in the 500 Series rack.
- Gently push the module into the slot until it is fully seated. Do not force the module.
- Secure the module using the mounting screws provided with your 500 Series rack.
- Once all modules are installed, you may power on your 500 Series rack.
Cunnessioni
The Midas 512 module receives and sends audio signals through the 500 Series rack's backplane. Refer to your 500 Series rack's manual for specific input and output configurations.
Imagine: Daretu view of the Midas 512 module. This image shows the back of the unit, which typically connects to the 500 series rack's power and audio I/O. Visible details include the serial number label and manufacturing origin information.
Istruzzioni di funziunamentu
The Midas 512 features four fully parametric bands, each offering precise control over gain, frequency, and bandwidth.
Imagine: Fronte angulata view of the Midas 512 Parametric Equaliser. This perspective provides a clearer view of the tactile controls, including the dual concentric knobs for gain and frequency, and the smaller knobs for bandwidth, along with the bell/shelving switches.
Cuntrolli Overview
- Gain (Inner Knob): Adjusts the boost or cut level for the selected frequency band.
- Frequency (Outer Knob): Selects the center frequency for the equalization band.
- Width (Q) (Small Knob): Controls the bandwidth of the equalization curve. A lower value results in a wider curve, affecting a broader range of frequencies, while a higher value creates a narrower, more precise curve.
- Bell/Shelving Switch (Bass & Treble Bands): Toggles between a bell-shaped curve (affecting frequencies around the center point) and a shelving curve (boosting or cutting all frequencies above/below the selected frequency).
- IN Button: Engages or bypasses the equalizer circuit. When engaged, the LED typically illuminates.
Band Specific Controls
The Midas 512 features four distinct bands:
- Bass Band: Controls frequencies from 20 Hz to 400 Hz. Features a Bell/Shelving switch.
- Lo Mid Band: Controls frequencies from 100 Hz to 2 kHz. This band operates in bell mode only.
- Hi Mid Band: Controls frequencies from 300 Hz to 8 kHz. This band operates in bell mode only.
- Treble Band: Controls frequencies from 1 kHz to 20 kHz. Features a Bell/Shelving switch.
Precision dual concentric controls provide instant access to fully variable gain and frequency settings, allowing for fast and easy setup.
Fully variable bandwidth controls are available on all four bands when in bell mode, offering detailed shaping of the frequency response.
Mantenimentu
To ensure the longevity and optimal performance of your Midas 512 equalizer, follow these maintenance guidelines:
- Pulizia: Use a soft, dry cloth to clean the exterior of the module. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish or internal components.
- Ambiente: Operate and store the module in a clean, dry environment, away from extreme temperatures, humidity, and direct sunlight. Avoid dusty conditions.
- Ventilazione: Ensure proper ventilation around the 500 Series rack to prevent overheating.
- Trattamentu: Always handle the module by its faceplate and sides. Avoid touching the edge connector pins.
Risoluzione di prublemi
If you encounter issues with your Midas 512 module, refer to the following common troubleshooting steps:
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| No audio output from the module. |
|
|
| Audio distortu o rumurosu. |
|
|
| I cuntrolli ùn rispondenu micca. |
|
|
Specificazioni
| Feature | Detail |
|---|---|
| Numero di mudellu | PARAMETRICEQUALIS512 |
| Pesu di l'articulu | 1.54 liri |
| Dimensioni di u produttu | 7.24 x 1.5 x 5.2 inch |
| Culore | turchinu |
| Interfaccia Hardware | 1/4-inch Audio (referring to the 500 series standard) |
| Formatu di Signal | Analogicu |
| Voltage | 9 Volts (typical for 500 series modules, supplied by rack) |
| Tipu Equalizer | 4-Band Fully Parametric |
| Bande di Frequency | Bass, Lo Mid, Hi Mid, Treble |
| Control di larghezza di banda | Fully variable on all four bands (in bell mode) |
| Response Types | Bell or Shelving (Bass and Treble bands) |
Garanzia è Supportu
For detailed warranty information and technical support, please refer to the official Midas website or contact your authorized Midas dealer. Keep your proof of purchase for warranty claims.
Midas is committed to providing high-quality products and support to its customers.
