1. Produttu Finituview
The LAUNCH CR-HD Plus is a versatile heavy-duty truck scanner and diagnostic scan tool designed for both diesel trucks and cars. It offers comprehensive diagnostic capabilities for various vehicle systems, supporting multiple protocols including J1587, J1708, J1939, and standard OBD II/EOBD/HOBD.
E caratteristiche chjave includenu:
- Covers Class 4 (14,001 lbs) through Class 8 (33,000 lbs and over) Heavy Duty Trucks.
- Includes 6-pin and 9-pin Deutsch connectors, plus OBDII 16-pin connectors.
- Supports J1587, J1939, and J1708 protocols for heavy-duty standards.
- Includes Generic/Global OBD II 16 PIN communication (cars and light trucks) - Modes 1-10.
- Ability to read and clear active and inactive fault codes, turn off Check Engine Light (MIL), clear codes, and reset monitors.
- Reads, records, graphs, and plays back live sensor data, including O2 sensor test data and EVAP data stream.
- Mostra u monitor è u statu di prontezza I/M (emissioni).
- Provides coverage for Engine, Transmission, Brakes, and more via Heavy Duty Standard.
- Monitors all data and views live data streams for efficient engine health assessment and sensor location.
- Features a full-color 2.8" LCD Display with an extra-long 6.5 ft. cable.
- Comes with a padded storage case.
- Offers lifetime free internet updates.
2. Ciò chì hè in a scatula
À l'apertura di u pacchettu, verificate chì tutti l'articuli seguenti sò inclusi:
- CR HD Plus Diagnostic Tool
- Manuale d'usu
- Padded Storage Case
- 6-pin Deutsch connector
- 9-pin Deutsch connector
3. Setup Guide
- Identify the Diagnostic Port: Locate the diagnostic port in your vehicle. For heavy-duty trucks, this is typically a 6-pin or 9-pin Deutsch connector. For cars and light trucks, it is usually a 16-pin OBDII port. Consult your vehicle's manual for the exact location.
- Select the Correct Connector: Choose the appropriate diagnostic connector (6-pin, 9-pin, or 16-pin) from the included accessories that matches your vehicle's port.
- Cunnette u scanner: Firmly connect the selected adapter to your vehicle's diagnostic port. Then, connect the other end of the adapter cable to the LAUNCH CR-HD Plus device.
- Power On: Once connected, the device should power on automatically. If not, ensure the vehicle's ignition is in the ON position (engine off or running, depending on the diagnostic task).
- Configurazione iniziale: Follow the on-screen prompts for initial language selection and system settings if prompted.
4. Operating Instructions
The LAUNCH CR-HD Plus offers various diagnostic functions. Navigate through the menus using the directional buttons and confirm selections with the 'Enter' button.
4.1 Lettura è Cancellazione di Codici
- From the main menu, select "Read Codes" or "Diagnostic" (menu options may vary slightly).
- The scanner will establish communication with the vehicle's ECU and display any active or pending Diagnostic Trouble Codes (DTCs).
- To clear codes, select "Clear Codes" from the menu. Confirm the action when prompted. Clearing codes will turn off the Check Engine Light (MIL) and reset monitor status.
4.2 Flussu di dati in diretta
Sta funzione vi permette view real-time data from the vehicle's sensors and components.
- Select "Live Data" from the main menu.
- Pudete sceglie view all data parameters or select specific ones.
- The data can be displayed in numerical, graph, or combined formats for easier analysis.
4.3 Cupertura di u Sistema
The LAUNCH CR-HD Plus provides OE-level diagnosis for various systems in heavy trucks, pickups, buses, and vans. This includes, but is not limited to:
- Sistema di mutore
- Sistema di trasmissione
- Braking System (ABS, ESP)
- Drivetrain
- Suspensione
- Cluster/Instrument Panel
- Sistema di scarico
- Sistema di carburante
- Cab Climate
- Cuntrollu di u corpu
- È più.
5. Mantenimentu
To ensure the longevity and optimal performance of your LAUNCH CR-HD Plus, follow these maintenance guidelines:
- Pulizia: Aduprà un soft, damp pannu per pulisce l'apparechju. Ùn aduprate micca detergenti abrasivi o solventi.
- Conservazione: Store the scanner in its padded storage case when not in use to protect it from dust, moisture, and physical damage. Keep it in a dry, cool environment.
- Cura di u cable: Avoid bending or crimping the diagnostic cable excessively. Always grasp the connector ends when plugging or unplugging to prevent damage to the pins or cable.
- Actualizazioni di u software: Regularly check for and install software updates. The device offers lifetime free internet updates, which can improve compatibility, add new features, and fix bugs.
6. Risoluzione di prublemi
This section addresses common issues you might encounter while using the LAUNCH CR-HD Plus.
6.1 U dispusitivu ùn s'accende micca
- Ensure the diagnostic cable is securely connected to both the vehicle's DLC (Data Link Connector) and the scanner.
- Verify that the vehicle's ignition is turned ON.
- Verificate u vulume di a batteria di u veiculutage. A low battery might prevent the scanner from powering up or communicating correctly.
- Inspect the diagnostic port for any bent or damaged pins.
6.2 Errore di cumunicazione
- Confirm that the correct diagnostic connector (6-pin, 9-pin, or 16-pin) is being used for your vehicle type.
- Assicuratevi chì tutte e cunnessione sianu solide è sicure.
- Verify the vehicle's ignition is ON.
- Try connecting to a different vehicle (if available) to determine if the issue is with the scanner or the vehicle.
- Update the scanner's software to the latest version.
6.3 Incorrect Connector Fit (as seen in customer video)
A customer video highlighted an issue where the provided connector did not fit the vehicle's port, despite appearing similar. This can occur due to subtle differences in pin configuration or connector design between various vehicle models or manufacturing years.
If you encounter a connector fit issue:
- Verificate a cumpatibilità: Double-check the compatibility of the scanner and its connectors with your specific vehicle's make, model, and year. Refer to the product's compatibility list or contact LAUNCH customer support with your vehicle's VIN.
- Ispettate i pin: Carefully compare the pin layout of your vehicle's diagnostic port with the connector. Even a slight difference in arrangement can prevent a proper connection.
- Cercà Supportu: If the provided connectors do not fit, contact LAUNCH customer support for assistance. They may be able to provide an alternative adapter or guidance.
7. Specificazioni
| Feature | Detail |
|---|---|
| Marca | LAUNCH |
| Mudellu | CReader HD Plus |
| Pesu di l'articulu | 1.9 liri |
| Dimensioni di u produttu | 4.7 x 3 x 1 inch |
| Sistema upirativu | Linux |
| Protocolli supportati | J1587, J1708, J1939, OBDII (Modes 1-10) |
| Mostra | 2.8" Full Color LCD |
| Lunghezza di u cable | 6.5 ft |
| UPC | 712321438010 |
8. Garanzia è Support
The LAUNCH CR-HD Plus comes with a 2-year warranty and lifetime free software updates. For any technical assistance or inquiries, please refer to the following contact information:
- Supportu per email: autoscope@163.com
- Supportu in ligna: You can contact the seller through the product detail page on Amazon by clicking the seller's store name and then "Ask a question."
- Periudu di garanzia: 2 anni
- Actualizazioni di u software: Lifetime Free Internet Updates
- Politica di rimborsu: 60 Days Unconditional Refund
