Introduzione
This manual provides essential information for the safe and efficient operation of your RCF ART 710A active 2-way speaker. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
Figura 1: Fronte view of the RCF ART 710A active speaker, showcasing its robust grille and RCF logo.
Importante infurmazione di sicurezza
- Alimentazione elettrica: Assicuratevi chì l'alimentazione di l'alimentazione voltage matches the requirements specified on the unit. Use only the provided power cord.
- Ventilazione: Ùn bluccate micca l'aperture di ventilazione. Assicuratevi un flussu d'aria adeguatu intornu à l'unità per impedisce u surriscaldamentu.
- umidità: Do not expose the unit to rain or moisture. Avoid placing liquids on or near the speaker.
- Placement: Place the speaker on a stable, level surface or mount it securely using appropriate hardware.
- Service : Cuntattate tutti i servizii di manutenzione di u persunale di serviziu qualificatu. Ùn pruvate micca à apre o riparà l'unità da per voi.
- Prutezzione di l'udito: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use hearing protection when operating at high volumes.
Funzioni chjave
- 1400W Peak Power, 700W RMS
- 10-inch Woofer, 1-inch Compression Driver
- FiRPHASE Technology for linear response
- Integrated DSP with equalization, phase control, soft limiting, crossover, and speaker protections
- Classe D Amplifiers
- Risposta in frequenza: 50 Hz - 20 kHz
- SPL massimu: 129 dB
Istituisci
1. Unpacking
Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain the original packaging for future transport or storage.
2. Placement and Mounting
The ART 710A can be used as a main front-of-house speaker, a stage monitor, or mounted on a pole. Ensure the speaker is placed on a stable surface or securely mounted.
- Montaggio di u polu: Use a standard 35mm speaker pole. Ensure the pole is rated to support the speaker's weight (approximately 37 lbs / 16.8 kg).
- Posizionamentu di u pianu: Per stage monitor applications, position the speaker at the desired angle.
- Suspension: If suspending the speaker, consult a qualified professional and use appropriate rigging hardware.
Figura 2: Top view of the RCF ART 710A, highlighting the integrated pole mount socket for stand placement.
3. Cunnessioni
Refer to the rear panel for all input and output connections.
Figure 3: Rear panel of the RCF ART 710A, displaying XLR inputs, output, volume control, and power connection.
- Input audio: Connect your audio source (mixer, instrument, etc.) to the INPUT EQUILIBRATU usendu un cable XLR.
- Audio Output (Link): Aduprà u SORTITA EQUILIBRATA to link to another speaker or audio device.
- Input di putenza: Cunnette u cavu di alimentazione furnitu à AC INPUT presa.
- Input Sensitivity Switch: Adjust for microphone or line-level signals.
- Controlu di u voluminu: Adjust the overall output level of the speaker.
Istruzzioni di funziunamentu
1. Powering On / Off
- Ensure all connections are secure and the volume control is set to minimum before powering on.
- Flip u INTERRUTTORE DI POTENZA to the "ON" position. The power indicator LED will illuminate.
- To power off, set the volume to minimum, then flip the INTERRUTTORE DI POTENZA à "OFF".
2. Adjusting Volume and Input Sensitivity
- Cumincià cù u VOLUME control at its minimum setting.
- Pone u SENSIBILITÀ INPUT switch according to your source: "MIC" for microphone level signals, "LINE" for line level signals (e.g., mixer output).
- Aumentà gradualmente u VOLUME control to the desired listening level. Monitor the signal LEDs to avoid clipping (distortion).
3. DSP Functions (Internal Processing)
The ART 710A features an integrated Digital Signal Processor (DSP) that manages equalization, phase control, soft limiting, crossover, and speaker protections automatically. There are no user-adjustable DSP parameters directly on the unit. The system is optimized for a linear response and balanced sound.
Mantenimentu
- Pulizia: Pulite a cabina di l'altoparlante cù un pannu dolce è asciuttu. Ùn aduprate micca detergenti abrasivi o solventi.
- Grille: Verificate periodicamente a griglia frontale per a presenza di polvere o detriti è pulitela delicatamente se necessariu per mantene una dispersione ottimale di u sonu.
- Conservazione: When not in use for extended periods, store the speaker in a dry, temperate environment, ideally in its original packaging or a protective cover.
- Ispezione: Regularly inspect power cables and audio cables for any signs of wear or damage. Replace damaged cables immediately.
Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| Nisuna uscita di sonu |
|
|
| Sonu distortu |
|
|
| Hum o rumore |
|
|
Specificazioni tecniche
| Feature | Detail |
|---|---|
| Mudellu | RCF ART 710A |
| Tipu di parlante | Active 2-way Speaker |
| Forza di putenza | 1400 W di punta, 700 W RMS |
| Woofer | 10-inch |
| Driver di cumpressione | 1-inch |
| Risposta di Frequency | 50 Hz - 20 kHz |
| SPL max | 129 dB |
| Funzioni DSP | FiRPHASE Technology, EQ, Phase Control, Soft Limiting, Crossover, Protections |
| AmpType più vivu | Classe D |
| Connettori di input | XLR |
| Connettori di uscita | XLR |
| Dimensioni (H x L x P) | 22.3 x 15.4 x 13.9 inch (56.6 x 39.1 x 35.3 cm) |
| Pesu | 37 lbs (16.8 kg) |
| Fonte d'energia | Corded Electric |
Infurmazioni di Garanzia
RCF products are covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and product. Please refer to the official RCF website or your local distributor for detailed warranty information and registration procedures. Keep your proof of purchase for warranty claims.
Assistenza Clienti
For technical assistance, service, or spare parts, please contact RCF customer support or your authorized RCF dealer. You can find contact information on the official RCF websitu:
When contacting support, please have your product model (ART 710A) and serial number ready. The serial number is located on the rear panel of the speaker.
