1. Introduzione
Thank you for choosing the Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
2. Istruzzioni di sicurità
- Sicurezza elettrica: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the main circuit breaker before attempting any installation, maintenance, or bulb replacement.
- Usu à l'esterno: This fixture is rated IP44, meaning it is protected against solid objects larger than 1mm and against splashing water from any direction. It is designed for outdoor use only.
- Tipu di bulbe: Use only R7s halogen bulbs with a maximum wattage di 150W. Superendu a putenza massimatage can cause overheating and damage to the fixture or create a fire hazard.
- Trattamentu: Do not touch the halogen bulb with bare hands during installation or replacement, as oils from your skin can cause premature failure. Use a clean cloth or gloves.
- Muntamentu: Assicuratevi chì a superficia di muntatura sia strutturalmente solida è chì pò supportà u pesu di l'apparecchiatura.
3. Cuntenutu di u pacchettu
Verificate chì tutti i cumpunenti sianu presenti è intatti:
- Brilliant Tanko 96162/06 Outdoor Wall Light Unit with Motion Sensor
- Ferramenta di muntatura (viti, tasselli murali)
- Manuale d'istruzzioni (stu documentu)
Note: R7s bulb is typically not included and must be purchased separately.
4. Setup è Installazione
Prima di principià: Assicuratevi chì l'alimentazione elettrica di a zona d'installazione sia interrotta à l'interruttore principale.
- Preparate a superficia di muntatura: Choose a suitable wall location for the fixture. Mark the drilling points for the mounting bracket.
- Muntà u supportu: Drill holes at the marked points and insert the wall plugs. Secure the mounting bracket to the wall using the provided screws.
- cablaggio: Connect the electrical supply wires to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations. Secure all connections tightly.
- Installa a lampadina: Carefully insert an R7s halogen bulb (max 150W) into the bulb holder. Avoid touching the glass part of the bulb with bare hands.
- Attaccate l'apparecchiatura: Secure the main light unit to the mounted bracket. Ensure it is firmly attached and sealed against the wall to maintain its IP44 rating.
- Adjust Sensor and Light Head: The motion sensor and light head are adjustable. Position them to cover the desired detection area and illumination direction.
Figure 4.1: Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This image shows the complete fixture, including the main light housing and the adjustable motion sensor unit mounted below it.
Figura 4.2: Primu pianu view of the R7s bulb socket within the Brilliant Tanko fixture. This illustrates where the R7s halogen bulb should be inserted.
5. Operating Instructions
Once installed and power is restored, the Brilliant Tanko 96162/06 will operate as follows:
- Rilevazione di muvimentu: The integrated motion sensor detects movement within its adjustable range. When motion is detected, the light will automatically turn on.
- Durata di a luce: The light will remain on for a set period after motion is detected. This duration is typically adjustable via controls on the sensor unit (refer to specific markings on your sensor for adjustment dials for 'TIME' and 'LUX' settings, if present).
- Ambient Light Sensor (LUX): The sensor also includes an ambient light sensor. This prevents the light from activating during daylight hours, saving energy. The sensitivity of this sensor can often be adjusted to determine at what level of darkness the motion sensor becomes active.
6. Mantenimentu
- Pulizia: Per pulisce l'apparecchiatura, assicuratevi chì l'alimentazione sia spenta. Asciugate cù un pannu dolce è morbidu.amp pannu. Ùn aduprate micca detergenti abrasivi o solventi, postu chì questi ponu dannà a finitura o u sensore.
- Sostituzione di bulbe: Always disconnect power before replacing the bulb. Allow the old bulb to cool completely. Carefully remove the old R7s bulb and insert a new R7s bulb (max 150W), avoiding direct contact with the glass.
- Ispezione: Verificate periodicamente l'apparecchiatura per eventuali segni di danni, cunnessione allentate o usura. Se si trovanu prublemi, scollegate l'alimentazione è cunsultate un elettricista qualificatu.
7. Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| A luce ùn accende micca. | No power supply. Blown bulb. Faulty wiring. Ambient light too high. | Check circuit breaker. Replace bulb. Verify wiring connections (consult electrician). Adjust LUX setting on sensor. |
| A luce ferma continuamente. | Continuous motion detected. Sensor faulty. Wiring error. | Adjust sensor angle/sensitivity. Check for obstructions. Consult electrician. |
| Light turns on randomly. | Sensor too sensitive. Environmental factors (wind, animals). | Reduce sensor sensitivity. Re-position sensor to avoid unwanted triggers. |
| Luce lampeggia. | Loose bulb. Incorrect bulb type. Power fluctuations. | Ensure bulb is seated correctly. Verify R7s 150W bulb. Consult electrician for power issues. |
8. Specificazioni
| Feature | Detail |
|---|---|
| Marca | Brillante |
| Numero di mudellu | 96162/06 |
| Dimensioni di u produttu (L x W x H) | 14 x 21 x 22 cm |
| Pesu di l'articulu | 521 grammi |
| Classificazione IP | IP44 |
| Stile | Moderna |
| Culore | Neru |
| Materiale | Metallu, Vetru |
| Numero di bulbi | 1 |
| Voltage | 230 Volts |
| Usi specifichi | Usu all'apertu solu |
| Funzioni spiciali | Adjustable (sensor/light head) |
| Tipu di capu | R7 |
| Max Wattage | 150 W |
| Fonte d'energia | Electrical Cable (Wired) |
| Tipu di stallazione | Montatura murale |
| Etichetta Energetica | A+ to E (for compatible bulbs) |
Figure 8.1: Energy label for the Brilliant Tanko 96162/06, indicating compatibility with bulbs from energy classes A++ to E.
9. Garanzia è Support
Information regarding specific warranty terms and spare parts availability for the Brilliant Tanko 96162/06 is not provided in the product data. For warranty claims, technical support, or inquiries about spare parts, please contact the retailer where you purchased the product or the manufacturer directly. Always have your proof of purchase and model number (96162/06) available when contacting support.
