1. Introduzione
This manual provides essential instructions for the installation, operation, and maintenance of the ROGER TECHNOLOGY R30/1204 Automatic Sliding Gate Motor. This electromechanical gear motor is designed for sliding gates weighing up to 1200 kg. It features an integrated H70 series control unit, an optical encoder, and a magnetic limit switch for precise and reliable operation. Please read this manual thoroughly before installation and use to ensure safe and correct operation.
2. Istruzzioni di sicurità
Impurtante: Failure to follow these safety instructions may result in serious injury or damage to property.
- L'installazione deve esse effettuata da persunale qualificatu in cunfurmità cù e normative elettriche è di sicurezza lucali.
- Ensure the power supply is disconnected before performing any installation, maintenance, or repair work.
- Do not allow children to play with or near the gate motor or its controls.
- Keep hands and loose clothing clear of moving parts of the gate and motor.
- Regularly inspect the gate and motor for signs of wear, damage, or misalignment.
- Do not attempt to repair the motor yourself. Contact qualified service personnel.
3. Produttu Finituview
The ROGER TECHNOLOGY R30/1204 is a robust motor designed for automating sliding gates. Its compact design houses a powerful 230V AC motor, an integrated control unit, and advanced safety features.
Figura 3.1: Esternu view of the R30/1204 motor unit.
Figure 3.2: Internal components, highlighting the motor and gear mechanism.
Funzioni chjave:
- Electromechanical gear motor for sliding gates.
- Suitable for gates up to 1200 kg.
- Integrated H70 series control unit.
- Optical encoder for precise gate positioning.
- Magnetic limit switches for accurate stop points.
- Irreversible gearbox for secure gate locking.
4. Specificazioni
| Parametru | Valore |
|---|---|
| Numero di mudellu | R30-1204 |
| Marca | ROGER TECHNOLOGY |
| Pesu Max Gate | 1200 kg |
| Linea Power Supply | 230 V AC - 50 Hz |
| Alimentazione di u Motore | 230 V AC |
| Potenza nominale | 420 W |
| Duty Cycle | 50% |
| Spinta | 800 N |
| Temperature di funziunamentu | -20 à +55 °C |
| Motor Protection Temperature | 150 °C |
| Velocità di porta | 9.5 m/min (0.16 m/s) |
| Gearbox Type | Irreversibile |
| Tipu di Switch Limitu | Magneticu |
| Unità di cuntrollu | Integrated H70/104AC |
| Tipu di codificatore | otticu |
| Max Product Dimensions (L x W x H) | 325 x 162 x 295 mm |
| Materiale | Metallu |
5. Setup è Installazione
Installation of the R30/1204 motor requires technical expertise and should only be performed by qualified professionals. This section provides a general overview; refer to the detailed installation manual provided with the product for specific wiring diagrams and mounting instructions.
- Preparazione di u situ: Ensure the gate track is clean, level, and free of obstructions. Prepare a stable concrete base for the motor unit.
- Muntaggio di u Motore: Securely fasten the motor unit to the prepared base using appropriate anchor bolts. Ensure correct alignment with the gate rack.
- Installazione di u rack: Attach the gate rack to the sliding gate, ensuring proper meshing with the motor's pinion gear. Maintain a small clearance between the rack and the pinion.
- Cunnessioni elettriche: Connect the motor to the 230V AC power supply. Wire the control unit (H70 series) according to the provided diagrams, including connections for safety photocells, remote controls, and other accessories.
- Ajustamentu di l'interruttore di limite: Install and adjust the magnetic limit switches at the desired open and closed positions of the gate. These switches signal the motor to stop.
- Programmazione iniziale: Power on the system and perform the initial programming steps for the control unit, which typically involves learning the gate's travel limits and setting operational parameters.
- Test di i Dispositivi di Sicurezza: Thoroughly test all safety devices, such as photocells and emergency stop buttons, to ensure they function correctly.
6. Operating Instructions
Once installed and programmed, the R30/1204 motor provides automated control of your sliding gate.
- Control remoto: Press the designated button on your remote control to open, close, or stop the gate.
- Liberazione manuale: In case of power failure or malfunction, the motor can be manually disengaged. Locate the manual release mechanism (usually a key-operated lever) on the motor unit, unlock it, and manually slide the gate. Remember to re-engage the motor after restoring power or resolving the issue.
- Funzioni di sicurezza: The optical encoder and safety photocells are designed to detect obstacles. If an obstacle is detected during closing, the gate will reverse. If detected during opening, the gate will stop.
7. Mantenimentu
Una manutenzione regulare assicura a longevità è u funziunamentu affidabile di u vostru mutore di cancello.
- Mensili:
- Inspect the gate track and wheels for debris and clear any obstructions.
- Check the gate rack for wear or damage.
- Verify the proper functioning of safety photocells and limit switches.
- Ogni sei mesi:
- Lubricate moving parts of the gate (wheels, bearings) as recommended by the gate manufacturer.
- Check all electrical connections for tightness and signs of corrosion.
- Inspect the motor housing for any damage or water ingress.
- Verificazione Prufessiunale Annuale: It is recommended to have a qualified technician perform an annual inspection and service of the entire gate automation system.
8. Risoluzione di prublemi
Questa sezione tratta di prublemi cumuni chì pudete scuntrà. Per prublemi più cumplessi, cunsultate un tecnicu qualificatu.
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| Motor does not respond to remote. | No power; remote battery dead; remote not programmed; safety device triggered. | Check power supply; replace remote battery; reprogram remote; check photocells for obstructions. |
| A porta si ferma di colpu. | Obstruction detected by photocells or encoder; limit switch faulty; motor overheating. | Clear obstructions; check limit switch connections; allow motor to cool down. |
| U cancellu si apre/chjude parzialmente. | Limit switches incorrectly set or faulty; gate obstruction. | Re-adjust limit switches; clear any physical obstructions. |
| U mutore face rumori strani. | Lack of lubrication; worn gears; foreign object in mechanism. | Lubricate moving parts; inspect gears for wear; remove any foreign objects. If noise persists, contact support. |
9. Garanzia è Support
Information regarding the specific warranty period and terms for the ROGER TECHNOLOGY R30/1204 motor is typically provided with the product documentation at the time of purchase. Please refer to your purchase receipt or contact your dealer for warranty details.
For technical support, spare parts, or service, please contact your authorized ROGER TECHNOLOGY dealer or installer.
- Disponibilità di pezzi di ricambio: L'infurmazione ùn hè micca dispunibile.
- Actualizazioni di u software: L'infurmazione ùn hè micca dispunibule.
