1. Introduzione
This manual provides detailed instructions for the setup, operation, and maintenance of your KADAMS Battery Digital Alarm Clock. Please read this manual thoroughly before using the device to ensure proper function and longevity.

Figure 1: KADAMS Battery Digital Alarm Clock (Front View)
This image shows the front of the KADAMS digital alarm clock, featuring a large, clear LCD display. The display shows the time (10:58 AM), date (March 29, Thursday), temperature (64.7°F), and humidity (56%). The clock is white with a minimalist design.
2. Funzioni chjave
- Display di u tempu: 12/24 hour format switchable.
- Température intérieure : Celsius (°C) and Fahrenheit (°F) switchable. Range: -10°C to 50°C (14°F to 122°F). Displays LL/HH outside range.
- Umidità interna: Relative Humidity (RH) range 10% - 99%. Displays LL/HH outside range.
- Calendariu: Month, Date (mm/dd), and Day of Week (3 characters).
- Funzione d'alarme: Rings for 2 minutes, with increasing intensity. Automatically stops.
- Funzione Snooze: 5-minute repeat, no limit on repeats.
- Retroilluminazione: Activates for 10 seconds when button is pressed.
- Indicatore di batteria: Displays on LCD when battery power is low (below 2.45V).
- Pantalla LCD: Eye-friendly color for better vision and wider viewl'anguli.
- Power Cut Memory: Presets are memorized if batteries are re-assembled within 30 seconds.
3. Setup
3.1 Installazione di batterie
The KADAMS Digital Alarm Clock requires 2 x batterie alcaline AA (not included). It is recommended to use new batteries for optimal performance.
- Truvate u compartmentu di a bateria in u spinu di u clock.
- Aprite u vetru di u coperchio di u compartimentu di a batteria.
- Insert two new AA alkaline batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Chiudere in modu sicuru u coperchiu di u compartimentu di a batteria.
Impurtante: Do not mix alkaline and rechargeable batteries. If the clock is not used for an extended period, remove the batteries to prevent leakage.

Figura 2: Posteriore View with Controls and Battery Compartment
This image displays the back of the KADAMS digital alarm clock, highlighting the battery compartment and the control buttons. The buttons are clearly labeled for setting time, alarm, and adjusting values.
4. Operating Instructions
The clock features several buttons on the back for setting and adjusting functions:
- TEMPU buttone: Adupratu per entre in u modu di impostazione di l'ora.
- SET buttone: Used to confirm settings or cycle through setting options.
- UP (▲) buttone: Used to increase values or switch modes.
- GIÙ (▼) buttone: Used to decrease values or switch modes.
- ON/OFF buttone: Used to activate/deactivate the alarm.
- SNOOZE / LIGHT button (top): Activates backlight and snooze function.
4.1 Impostazione di l'ora è a data
- Appughjà è tene premutu TEMPU button for 3 seconds to enter time setting mode. The hour digits will flash.
- Aduprà u UP or GIÙ buttoni per aghjustà l'ora.
- Press u SET button to confirm the hour and move to minute setting. The minute digits will flash.
- Aduprà u UP or GIÙ buttone per aghjustà i minuti.
- Press u SET button to confirm minutes and move to year setting.
- Cuntinuà à aduprà UP/GIÙ è SET to set the Year, Month, and Date. The day of the week will automatically adjust based on the date.
- After setting the date, press SET per sorte da a modalità di impostazione.
- To switch between 12-hour (AM/PM) and 24-hour format, press the UP buttone mentre hè in modu di visualizazione di l'ora nurmale.
4.2 Impostazione di l'allarme
- Appughjà è tene premutu ALLARME button (often indicated by a bell icon) for 3 seconds to enter alarm setting mode. The alarm hour digits will flash.
- Aduprà u UP or GIÙ buttone per aghjustà l'ora di l'alarma.
- Press u SET button to confirm the alarm hour and move to alarm minute setting. The alarm minute digits will flash.
- Aduprà u UP or GIÙ buttoni per aghjustà i minuti di l'allarme.
- Press u SET buttone per esce da a modalità di impostazione di l'allarme.
- Per attivà o disattivà l'allarme, appughjà u buttone ON/OFF buttone. Un'icona d'alarma apparirà nantu à u display quandu hè attivata.
4.3 Snooze and Backlight Function
The large button on the top of the clock serves two functions:
- Retroilluminazione: Press u SNOOZE / LIGHT button briefly to illuminate the LCD screen. The backlight will remain active for approximately 10 seconds.
- Snooze: Quandu l'alarma sona, appughjà u buttone SNOOZE / LIGHT button to temporarily silence the alarm. The alarm will sound again after 5 minutes. This function can be repeated indefinitely.

Figure 3: Snooze/Light Button Location
This image shows the top of the KADAMS digital alarm clock, with an arrow pointing to the "SNOOZE/LIGHT" button. Text overlays explain its functions: "Press button to Light-Up LCD Screen Deactivates after 10 seconds" and "Press button to Turn Off Alarm Sound 5 Minute Repeat".
4.4 Visualizzazione di a temperatura è di l'umidità
The clock continuously displays indoor temperature and relative humidity.
- Unità di temperatura: Per cambià trà Celsius (°C) è Fahrenheit (°F), appughjà u buttone GIÙ buttone mentre hè in modu di visualizazione di l'ora nurmale.
- Range di visualizazione: If the temperature or humidity falls outside the measurable range, the display will show "LL" (Low) or "HH" (High).
5. Mantenimentu
5.1 Sustituzione di batterie
When the battery indicator appears on the LCD screen, it signifies that the battery power is low (below 2.45V). Replace both AA batteries promptly to ensure continued accurate operation. Follow the battery installation steps in Section 3.1.
5.2 Pulizia
To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the clock in water.
6. Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| U display hè scuru o viotu. | Low batteries or incorrect battery installation. | Rimpiazzà e batterie cù batterie alcaline AA nove, assicurendu a polarità curretta. |
| Temperature/Humidity shows "LL" or "HH". | Environmental conditions outside the measurable range. | This is normal. The clock will display readings once conditions return within the range (-10°C to 50°C for temp, 10% to 99% for humidity). |
| L'alarma ùn sona micca. | L'alarma ùn hè micca attivata o hè impostata in modu incorrectu. | Ensure the alarm is turned ON (alarm icon visible). Verify the alarm time is set correctly. |
| Day of the week is incorrect. | Year or date is set incorrectly. | Re-enter the correct Year, Month, and Date. The day of the week is calculated automatically. |
| Screen is too dark to read without backlight. | This is a characteristic of the LCD panel. | Press the SNOOZE/LIGHT button for temporary illumination. Ensure adequate ambient lighting for continuous viewing without backlight. |
7. Specificazioni
- Mudellu: K0337STHW
- Dimensioni: L 145mm * H 62mm * W 44mm (5.7 in * 2.4 in * 1.7 in)
- Pesu nettu: 165 g (0.36 lbs)
- Fonte di energia: 2 x AA Alkaline Batteries (3.0V total)
- Gamma di temperatura: -10 °C à 50 °C (14 °F à 122 °F)
- Gamma di Umidità: 10% UR - 99% UR
- Tipu di visualizazione: LCD digitale
- Culore: Biancu

Figura 4: Dimensioni di u produttu
This image provides a detailed diagram of the KADAMS digital alarm clock with its precise measurements. It shows the length as 145 mm (5.7 inches) and the height as 62 mm (2.4 inches).
8. Garanzia è Support
Specific warranty information and direct customer support contact details are not provided within this manual. For warranty claims, technical assistance, or further inquiries, please refer to the official KADAMS websitu o cuntattate u rivenditore da quale avete acquistatu u pruduttu.
You may also visit the KADAMS Store on Amazon for more information: KADAMS Amazon Store





