Introduzione
This manual provides comprehensive instructions for the installation, operation, and maintenance of your LTS LTCMIP7342W-28M Platinum Network Vandal Dome IP Camera. Please read this manual thoroughly before using the product to ensure proper setup and functionality. Keep this manual for future reference.
The LTS LTCMIP7342W-28M is a 4MP high-definition network vandal dome IP camera designed for robust surveillance applications. It features a 2.8mm fixed lens, True WDR (120dB), Matrix IR 2.0 with up to 100 feet range, and supports H.265/H.265+/H.264/H.264+ video compression. It is rated IP67 for weather resistance and IK10 for vandal resistance, making it suitable for outdoor use. The camera also includes a MicroSD slot supporting up to 128GB for local storage and can be powered by DC 12V or Power over Ethernet (PoE).
Cuntenutu di u pacchettu
Verificate chì tutti l'articuli sò presenti in u pacchettu prima di cuntinuà cù l'installazione.
- LTS LTCMIP7342W-28M Platinum Network Vandal Dome IP Camera
- Template di Trapanu
- Viti di muntatura è tasselli murali
- Hex Wrench
- Waterproof Connector Kit
- Guida di avvio rapidu (vede stu manuale per istruzioni dettagliate)
Image: Contents of the camera package. This includes a drill template, mounting hardware (screws and wall plugs), a hex wrench for adjustments, and a waterproof connector kit for network cables. These components are essential for proper installation.
Istituisci
1. Precauzioni di sicurità
- Assicuratevi chì a putenza hè scollegata prima di a stallazione o di mantenimentu.
- Use only specified power adapters (DC 12V) or PoE (Power over Ethernet) compliant equipment.
- Avoid exposing the camera to extreme temperatures, humidity, or corrosive environments.
- Do not attempt to disassemble the camera. Refer all servicing to qualified personnel.
2. Camera Overview
Image: Fronte view of the LTS LTCMIP7342W-28M dome camera. This image shows the main body of the camera with its dome cover, indicating its compact and discreet design.
Image: Latu view of the LTS LTCMIP7342W-28M dome camera, showing the attached cables for power and network connectivity. This view highlights the integrated cable management for installation.
3. Cablaggio è cunnessione
The LTCMIP7342W-28M camera primarily uses a network cable for both data and power (PoE). It is not compatible with traditional DC power and BNC video connections.
Image: This diagram illustrates the correct and incorrect wiring methods. On the left, a network cable (RJ45) is circled in green, indicating compatibility for both video and Power over Ethernet (PoE). On the right, DC power and BNC video connectors are circled in red, indicating they are not compatible with this camera model.
- Cunnessione di Rete: Connect a standard Ethernet cable (Cat5e or Cat6) from the camera's RJ45 port to a PoE-enabled switch or NVR. If not using PoE, connect to a standard network switch and provide 12V DC power separately.
- putenza: The camera supports Power over Ethernet (PoE) or a 12V DC power supply. Ensure the power source meets the camera's requirements.
- Connettore impermeabile: Use the provided waterproof connector kit for outdoor installations to protect the RJ45 connection from moisture.
4. Mounting la Camera
- Preparate a superficia di muntatura: Choose a suitable location, typically a ceiling or wall, ensuring it can support the camera's weight.
- Aduprate u mudellu di trapanu: Place the provided drill template on the desired mounting surface. Mark the positions for the mounting screws and cable routing hole.
- Fori: Drill pilot holes for the mounting screws (typically 5.5mm diameter for expansion screws) and a larger hole for cable routing, if necessary.
- Cavi di rotta: Pass the network cable through the cable routing hole.
- Assicurà a basa di a camera: Align the camera base with the drilled holes and secure it using the provided mounting screws and wall plugs.
- Ajuste l'angolo di a camera: Loosen the adjustment screws (if applicable) to position the camera lens for the desired viewAngulu d'angulu. Stringhje e viti una volta aghjustate.
Operazione
1. Initial Power-Up and Network Configuration
- After connecting the camera to power and the network, it will boot up. This may take a few minutes.
- Use the manufacturer's IP search tool (e.g., SADP Tool) to discover the camera's IP address on your network.
- Accede à a camera web interfaccia inserendu u so indirizzu IP in a web navigatore.
- Follow the on-screen prompts to set a strong password for the camera (if it's a new installation or reset).
- Configure network settings (IP address, subnet mask, gateway, DNS) as required by your network infrastructure.
2. Settings Video
- Risoluzione: The camera supports up to 4MP (2560x1440) resolution at 30 frames per second. Adjust as needed for bandwidth and storage considerations.
- Cumpressione: Utilize H.265+ or H.265 for efficient video storage and bandwidth usage. H.264+ and H.264 are also supported.
- WDR (Wide Dynamic Range): Enable True WDR (120dB) in challenging lighting conditions to balance bright and dark areas in the image.
- Visione notturna: The camera features Matrix IR 2.0 with a range up to 100 feet. IR LEDs automatically activate in low light.
3. Registrazione è almacenamentu
- Registrazione NVR: Connect the camera to a compatible Network Video Recorder (NVR) for continuous or event-based recording.
- Carta MicroSD: Insert a MicroSD card (up to 128GB) into the camera's slot for local storage. Configure recording schedules and event triggers via the web interfaccia.
- Rilevazione di muvimentu: Set up motion detection zones and sensitivity to trigger recordings or alerts.
4. Accessu Remote
Per a distanza viewing, configure port forwarding on your router or use a P2P/Cloud service provided by the manufacturer (if available) to access the camera feed via a mobile app or client software.
Mantenimentu
- Pulizia di lenti: Periodically clean the camera lens and dome cover with a soft, damp pannu. Evitate i detergenti abrasivi chì puderanu graffià a superficia.
- Actualizazioni di firmware: Verificate u fabricatore website for firmware updates to ensure optimal performance and security. Follow update instructions carefully.
- Ispezione di u cable: Regularly inspect all cables and connections for signs of wear or damage, especially in outdoor installations.
- Verifiche Ambientali: Ensure the camera's environment remains within its specified operating temperature and humidity ranges.
- Gestione di password: Change passwords regularly and use strong, unique passwords for enhanced security.
Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| Nisun feed d'imagine/video | No power; Network cable disconnected; Incorrect IP address; Camera malfunction. | Check power supply/PoE connection; Verify network cable is securely connected; Use IP search tool to find camera; Contact technical support if malfunction suspected. |
| Scarsa qualità d'imagine | Dirty lens/dome; Low light conditions; Incorrect video settings; Network bandwidth issues. | Clean lens/dome; Ensure IR is active in low light; Adjust resolution, WDR, and other image settings; Check network connection speed. |
| Ùn si pò accede à a camera à distanza | Incorrect port forwarding; Firewall blocking access; Dynamic IP address changed; P2P/Cloud service offline. | Verify router port forwarding rules; Check firewall settings on router/NVR; Use DDNS service for dynamic IPs; Check status of P2P/Cloud service. |
| A carta SD ùn registra micca | SD card full or faulty; Incorrect recording schedule; SD card not formatted. | Check SD card status and remaining space; Format SD card via camera interface; Verify recording schedule and event triggers. |
Specificazioni
| Feature | Detail |
|---|---|
| Mudellu | LTCMIP7342W-28M |
| Risoluzione Video Capture | 4 MP (2560x1440) |
| Frame Rate | 30 fps |
| Lens | Lente Fissa di 2.8 mm |
| WDR | Vera WDR 120dB |
| Range IR | Up to 100 feet (Matrix IR 2.0) |
| Illuminazione minima | 0.018 Lux @ F1.6 |
| Cumpressione Video | H.265, H.265+, H.264, H.264+ |
| Storage | MicroSD Slot (up to 128GB) |
| Alimentazione elettrica | 12V CC, PoE (802.3af) |
| Prutezzione di Ingress | IP67 |
| Resistenza Vandali | IK10 |
| Tecnulugia di cunnessione | Wired (Ethernet) |
| Tipu di muntatura | Muntu di u tettu |
| Temperature di funziunamentu | (Refer to manufacturer's full datasheet for exact range) |
| Dimensioni | Circa 7 x 7 x 7 pollici (Dimensioni di u pacchettu) |
| Pesu | Circa. 2.5 liri |
Garanzia è Supportu
For warranty information, technical support, and service inquiries, please contact your authorized TSL dealer or visit the official TSL websitu. Conservate a vostra ricevuta d'acquistu cum'è prova d'acquistu per e richieste di garanzia.
Produttore: LTS
Marca: TSL
