Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of your Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever. Please read all instructions carefully before beginning installation to ensure proper function and safety.

Image: The Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever, showcasing its elegant design and satin nickel finish.
Informazioni di sicurezza
ATTENZIONE: Stu pruduttu pò espose à i sustanzi chimichi cumpresi u piombo, chì hè cunnisciutu da u Statu di California per causà cancer è difetti di nascita o altre dannu riproduttivu. Per più infurmazione vai à www.P65Warnings.ca.gov.
Always wear appropriate safety gear, such as gloves and eye protection, during installation. Keep small parts away from children.
Cuntenutu di u pacchettu
Verificate chì tutti i cumpunenti sò presenti prima di principià l'installazione:
- Assemblea di leva esterna
- Assemblea di a leva interna
- Adjustable Latch (2-3/8" - 2-3/4" backset)
- Rounded Steel Faceplate
- Strike Plate
- Viti di montaggio
- Manuale d'istruzzioni

Image: All included components of the door lever set, including the lever assemblies, latch, faceplate, and strike plate.
Installazione è installazione
This door lever is designed to fit all doors 1-3/8" to 1-3/4" in thickness. The latch is adjustable for backsets of 2-3/8" or 2-3/4". Detailed installation instructions are included with your product. The following provides a general overview di u prucessu di stallazione:
- Preparate a Porta: Ensure your door has the standard bore holes for a door lever. If replacing an existing lever, remove the old hardware.
- Ajustà u chjusu: If necessary, adjust the latch backset to either 2-3/8" (60mm) or 2-3/4" (70mm) to match your door's specifications. Insert the latch into the door edge, ensuring the bevel faces the door frame. Secure with screws.
- Install Exterior Lever: Place the exterior lever assembly through the door bore hole, ensuring the spindle passes through the latch mechanism.
- Install Interior Lever: Align the interior lever assembly with the exterior assembly and secure it with the provided mounting screws. Ensure the levers are horizontal and operate smoothly.
- Installa a piastra di battuta: Attach the strike plate to the door frame, aligning it with the latch bolt. Secure with screws.
- Operazione di prova: Close the door and test the lever operation from both sides to ensure the latch retracts and extends properly.

Image: The Amazon Basics door lever installed on a white interior door, demonstrating its appearance in a typical setting.
Istruzzioni di funziunamentu
To open the door, simply push down on the lever handle. The latch bolt will retract, allowing the door to open. Release the lever to allow the latch bolt to extend and secure the door when closed.
Mantenimentu
To maintain the finish and functionality of your door lever, follow these guidelines:
- Pulizia: Pulite a leva cù un pannu dolce, damp pannu. Evitate l'usu di detergenti abrasivi, solventi o chimichi aggressivi, postu chì questi ponu dannà a finitura.
- Lubrificazione: If the lever mechanism becomes stiff over time, apply a small amount of silicone-based lubricant to the moving parts of the latch and spindle.
- Serramentu: Periodically check and tighten any loose mounting screws to ensure the lever remains securely attached to the door.
Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| A leva hè allentata o traballante. | E viti di muntatura sò allentate. | Tighten the mounting screws on the interior side of the lever. |
| U catenacciu di scrocco ùn si ritrae micca cumpletamente. | Mechanism is dirty or dry; improper installation. | Clean and lubricate the latch mechanism. Recheck installation steps to ensure proper alignment. |
| A porta ùn si chjude micca bè. | Strike plate misalignment; latch bolt not extending fully. | Adjust the strike plate on the door frame. Ensure the latch mechanism is clean and lubricated. |
Specificazioni
| Feature | Detail |
|---|---|
| Numero di mudellu | AB-DH504-SN |
| Materiale | Zinc Alloy (body), Steel (internal structure) |
| Finisci | Nichel Satinatu |
| Compatibilità di u spessore di a porta | 1-3/8" to 1-3/4" |
| Backset à scroccu regolabile | 2-3/8" (60 mm) o 2-3/4" (70 mm) |
| Dimensioni di u produttu | 6.65"L x 4.29"L |
| Pesu di l'articulu | 1.43 liri |
| Stile | Passage (non-locking) |
| UPC | 841511121248 |

Image: A hand holding the door lever, illustrating its approximate size and dimensions (2.6 inches / 6 cm in height).
Garanzia è Supportu
For warranty information or technical support, please refer to the Amazon Basics official website or contact Amazon customer service. Keep your purchase receipt for warranty claims.





