Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of the Custom Dynamics ProBEAM 5 3/4" LED Headlamp, model PB-575-B. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Figura 1: Fronte view of the Custom Dynamics ProBEAM 5 3/4" LED Headlamp (PB-575-B). This image shows the clear lens, the upper LED light bars, and the lower projector-style LED elements, along with the Custom Dynamics logo at the bottom.
Informazioni di sicurezza
Osservate sempre e seguenti precauzioni di sicurezza:
- Scollegate a batteria di u veiculu prima di fà qualsiasi travagliu elettricu.
- Assicuratevi chì tutte e cunnessione sianu sicure è bè isolate per impedisce i curtcircuiti.
- Cunsultate un tecnicu qualificatu s'è vo ùn site micca sicuru di qualchì passu d'installazione.
- Do not modify the headlamp in any way, as this may void the warranty and compromise safety.
- Portate l'equipaggiu di prutezzione individuale (PPE) adattatu durante l'installazione.
Cuntenutu di u pacchettu
Verificate chì tutti i cumpunenti sò presenti prima di principià l'installazione:
- 1x Custom Dynamics ProBEAM 5 3/4" LED Headlamp (PB-575-B)
- 1x Wiring Harness (if applicable, check product packaging)
- 1x Manuale d'istruzzioni (questu documentu)
Installazione è installazione
- Preparazione: Park the vehicle on a level surface and turn off the ignition. Disconnect the negative terminal of the vehicle's battery.
- Remove Existing Headlamp: Carefully remove the bezel or retaining ring securing the existing 5 3/4" headlamp. Disconnect the wiring harness from the old headlamp.
- Install ProBEAM Headlamp: Connect the wiring harness of the ProBEAM LED headlamp to the vehicle's headlamp connector. Ensure the connection is secure.
- Secure Headlamp: Place the ProBEAM LED headlamp into the headlamp bucket. Reinstall the retaining ring or bezel to secure the headlamp in locu.
- Ricollegate a batteria: Ricunnette u terminal negativu di a batteria di u veiculu.
- Funzionalità di prova: Turn on the vehicle's ignition and test the headlamp's low beam, high beam, and any integrated auxiliary functions (e.g., daytime running lights, if applicable).
- Scopu: Aghjustate u capuamp aim according to local regulations and for optimal visibility without blinding oncoming traffic. Refer to your vehicle's service manual for specific aiming procedures.
Note: Specific installation steps may vary depending on the vehicle model. Always refer to your vehicle's service manual for detailed instructions on removing and installing headlamps.
Istruzzioni di funziunamentu
The Custom Dynamics ProBEAM LED Headlamp operates in conjunction with your vehicle's existing headlamp switch. It features both low beam and high beam functions.
- Fascia bassa: Activate your vehicle's low beam setting for standard illumination.
- Fascia Alta: Activate your vehicle's high beam setting for increased illumination when conditions permit.
The LED technology provides instant-on illumination and a crisp, clear light output. No special operating procedures are required beyond standard vehicle headlamp funziunamentu.
Mantenimentu
The Custom Dynamics ProBEAM LED Headlamp is designed for long-lasting performance with minimal maintenance.
- Pulizia: Pulite u capuamp lens with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents, as these can damage the lens.
- Ispezione: Inspeccione periodicamente u capuamp for any signs of damage, loose connections, or moisture ingress.
- Sostituzione di bulbe: The LED elements are designed to last the lifetime of the product and are not user-replaceable. If the headlamp malfunctions, contact Custom Dynamics support.
Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| Testaamp ùn illumina micca |
|
|
| Testaamp flickers or is dim |
|
|
| Umidità à l'internu di a lente |
|
|
Specificazioni
| Feature | Detail |
|---|---|
| Numero di mudellu | PB-575-B |
| Testaamp Taglia | 5 3/4 inch |
| Fonte di luce | LED |
| Culore | Black (housing), Clear (lens) |
| Materiale di lente | Policarbonate |
| Funzione speciale | High Beam functionality |
| Pesu di l'articulu | 2.25 liri |
| UPC | 644978545677 |
Garanzia è Supportu
For warranty information, technical support, or replacement parts, please contact Custom Dynamics directly. Refer to the official Custom Dynamics website for the most current warranty policy and contact details.
Custom Dynamics Contact Information:
- Websitu: www.customdynamics.com
- Telefono: Riferitevi à websitu per i numeri di cuntattu attuali.
- Email: Refer to websitu per l'indirizzu email di cuntattu attuale.
