1. Introduzione
The Modecom Oberon Pro Midi Tower is a computer case designed for users seeking a functional and spacious interior with a modern aesthetic. This manual provides essential information for the proper installation, operation, and maintenance of your computer case, ensuring optimal performance and longevity of your components.
Figura 1: Fronte è laterale view of the Modecom Oberon Pro Midi Tower computer case.
2. Informazioni di sicurezza
- Scollegate sempre l'alimentatore da a presa murale prima di installà o rimuovere qualsiasi cumpunente.
- Handle components with care to avoid electrostatic discharge. Consider using an anti-static wrist strap.
- Mantene i pezzi chjuchi è l'arnesi luntanu da i zitelli.
- Assicuratevi una ventilazione adatta intornu à a carcassa per impedisce u surriscaldamentu.
- Do not attempt to modify the case structure, as this may void your warranty and pose safety risks.
3. Cuntenutu di u pacchettu
Verify that all the following items are present in your package:
- Modecom Oberon Pro Midi Tower Computer Case
- Accessory box (screws, standoffs, cable ties)
- Manuale d'uso (stu documentu)
4. Funzioni chjave
- Internu spaziosu: Designed to accommodate high-end components and facilitate good airflow.
- Raffreddamentu efficiente: Includes two pre-mounted 120mm fans (front and rear) to prevent component overheating.
- Installazione senza arnesi: Supports tool-free mounting for SSD/HDD drives and expansion cards.
- Filtrazione di a polvere: Features easily dismountable magnetic filters on the top, front, and bottom (under the power supply unit) to keep the interior clean.
- Optimized Cable Management: Provides a system for convenient wiring organization.
- Long PSU Tunnel: Offers a 240mm space for power supplies, simplifying installation and cable arrangement.
5. Setup è Installazione
5.1. Preparazione di u Casu
Before installation, remove the side panels of the case. The Oberon Pro features sound-dampening mats on the side panels to reduce noise.
Figura 2: Interior view showing sound-dampening mats on the side panel.
5.2. Installazione di scheda madre
Install the necessary standoffs for your motherboard form factor (ATX, Micro ATX, ITX). Carefully place your motherboard into the case, aligning it with the standoffs, and secure it with screws.
Figure 3: Interior layout with pre-installed rear fan and motherboard tray.
5.3. Drive Installation (SSD/HDD)
The Oberon Pro supports tool-free installation for three 2.5" SSDs and two 3.5" HDDs. The 3.5" HDD bays are located in the power supply tunnel at the bottom of the case. 2.5" SSDs can be mounted on both sides of the motherboard tray.
Figure 4: Dedicated bays for HDD and SSD storage devices.
5.4. Installazione Power Supply
The case features a long PSU tunnel (240mm) at the bottom. Install your power supply unit into this tunnel and secure it. This design aids in cable management and airflow.
5.5. Expansion Card Installation (PCI/PCIe)
Install your graphics card or other expansion cards into the PCI/PCIe slots. The case supports tool-free mounting for these cards, allowing for easy installation and removal.
Figura 5: Internu posteriore view highlighting the expansion card slots.
5.6. Gestione di cavi
Utilize the provided cable routing options and tie-down points behind the motherboard tray to organize cables. This improves airflow and maintains a tidy interior.
6. Sistema di Cooling
The Oberon Pro comes with two pre-installed 120mm fans, one at the front and one at the rear, to ensure adequate airflow. The maximum height for a CPU cooler is 163mm, and the maximum length for a video card is 395mm, allowing for compatibility with a wide range of components.
7. Mantenimentu
To maintain optimal performance and prevent dust buildup, regularly clean the dust filters. The magnetic filters on the top, front, and bottom of the case are easily dismountable for cleaning. Use compressed air or a soft brush to remove accumulated dust.
8. Risoluzione di prublemi
- Nisun putere: Ensure all power cables are securely connected to the motherboard, power supply, and wall outlet. Check the power button connection to the motherboard.
- Surriscaldamentu: Verify that all fans are spinning correctly and that dust filters are clean. Ensure proper cable management to avoid obstructing airflow.
- I porti di u pannellu frontale ùn funzionanu micca: Check that the front panel connectors (USB, audio) are correctly plugged into the motherboard headers.
Figure 6: Front panel I/O ports for connectivity.
9. Specificazioni
| Feature | Specificazione |
|---|---|
| Marca | Modecom |
| Nome di mudellu | Oberon Pro |
| Numero di mudellu | AT-OBERON-PS-10-000000-0002 |
| Culore | Neru |
| Tipu di casu | Torre di Midi |
| Cumpatibilità di a scheda madre | ATX, Micro ATX, ITX |
| Materiale | Alloy Steel |
| Metudu di rinfrescante | Aria |
| Fans preinstallati | 2 x 120mm (Front, Rear) |
| Altezza massima di CPU Cooler | 163 mm |
| Lunghezza massima GPU | 395 mm |
| Drive Bays | 3 SSD da 2.5", 2 discu duru da 3.5" |
| Total Ports USB | 4 |
| Funzioni spiciali | Reset Button, Dust Filter, LED Indicators, Side Window |
| Pesu di l'articulu | 5270 grammi |
Figure 7: Rear exterior view of the computer case.
10. Garanzia è Support
For warranty information and technical support, please refer to the official Modecom websitu o cuntattate u vostru rivenditore. Conservate a vostra prova d'acquistu per qualsiasi reclamu di garanzia.
