Manuale d'usu di a scrivania elettrica in piedi FLEXISPOT EF1

1. Produttu Finituview

The FLEXISPOT EF1 Electric Standing Desk is designed to provide a versatile and ergonomic workspace, allowing users to easily switch between sitting and standing positions. This manual provides detailed instructions for assembly, operation, and maintenance to ensure optimal performance and longevity of your desk.

Figure 1.1: FLEXISPOT EF1 Electric Standing Desk Frame (White Legs)

Figure 1.2: The EF1 Electric Standing Desk integrated into a modern office environment, showcasing its functionality with a tabletop.

2. Funzioni chjave

• Gamma d'altezza regulabile: Easily switch between sitting and standing positions with a lifting range of 71-121 cm (legs only).
• Funzione di memoria: Store up to four preferred height settings for quick and convenient adjustments with a single touch.
• Capacità di Carica Robusta: Supports up to 70 kg, accommodating various office equipment.
• Funzionamentu silenziu: Operates with a low noise level of below 50dB, ensuring a peaceful work environment.
• Rilevazione d'ostaculi: Built-in safety feature that stops and slightly reverses the desk's movement if an obstacle is detected during adjustment.
• Custruzzione durabile: Made with high-strength SPCC steel for a stable and long-lasting frame.

Figure 2.1: Illustration of the obstacle detection safety feature, showing the desk stopping and reversing upon encountering an obstruction.

Figure 2.2: Diagram highlighting the robust SPCC steel frame construction, emphasizing durability and stability.

3. Setup è Assemblea

Please follow these instructions carefully for proper assembly. It is recommended to have an electric screwdriver for easier installation of the tabletop.

3.1 Checking for Height Differences

Before assembly, verify if there is any height difference between the left and right support columns. This is crucial for proper desk operation.

Figure 3.1: Visual guide for checking and adjusting height differences between the desk legs before full assembly. If a height difference exists, loosen the screw and insert the propeller shaft to adjust.

3.2 Tabletop Installation and Screw Holes

When attaching the tabletop and the central beam, you may need to drill your own screw holes. An electric screwdriver is highly recommended for this step.

If you are using a FLEXISPOT tabletop, some pre-drilled screw holes may align with the leg plates, serving as a reference for positioning. Other screw holes are designed for different FLEXISPOT models.

Figure 3.2: Illustration demonstrating the process of drilling screw holes for attaching the central beam and controller to the tabletop. An electric drill is shown as a recommended tool.

4. Operating Instructions

The FLEXISPOT EF1 desk features an intuitive control panel for easy height adjustments and memory functions.

4.1 Aghjustà l'altezza

To adjust the desk height, simply press the up or down arrow buttons on the controller until the desired height is reached. The desk will move smoothly at a speed of 25mm/s.

4.2 Usendu i Preset di Memoria

The controller allows you to save and recall up to four different height settings. To save a height:

1. Ajustate u scrivania à l'altezza desiderata.
2. Press the 'M' button (or similar memory button) followed by one of the numbered preset buttons (1, 2, 3, or 4). The height is now saved to that preset.

Per richiamà una altezza salvata, basta à appughjà u buttone preimpostatu numeratu currispundente (1, 2, 3, o 4). U scrivania si moverà automaticamente à a pusizione salvata.

Note: The physical location of the controller on the desk may vary from some product images; the actual controller is typically located on the left side of the desk.

5. Specificazioni

Detailed technical specifications for the FLEXISPOT EF1 Electric Standing Desk:

Figure 5.1: Diagram illustrating key specifications including lifting range, load capacity, and noise level.

6. Mantenimentu

To ensure the longevity and smooth operation of your FLEXISPOT EF1 Electric Standing Desk, follow these simple maintenance guidelines:

• Pulizia: Wipe the desk frame and controller with a soft, damp pannu. Evitate l'usu di detergenti abrasivi o solventi chì puderanu dannà a finitura.
• Gestione di Cable: Regularly check and organize cables to prevent tangling or interference with the desk's movement.
• Lubrificazione: The internal mechanisms are generally maintenance-free. Do not attempt to lubricate any moving parts unless specifically instructed by FLEXISPOT support.
• Ispezione regulare: Verificate periodicamente tutte e viti è i bulloni per assicurassi ch'elli sianu ben stretti. Stringhjiteli di novu se necessariu.

7. Risoluzione di prublemi

If you encounter any issues with your FLEXISPOT EF1 Electric Standing Desk, please refer to the following common troubleshooting tips:

• Scrivania ùn si move micca:
  • Verificate s'ellu u cavu di alimentazione hè bè cunnessu à u scrivania è à a presa di corrente.
  • Assicuratevi chì ùn ci sia micca ostaculi chì impediscenu à u scrivania di spustassi in sù o in ghjò.
  • Perform a reset (refer to the controller manual for specific reset procedures, if available).
• Altezza irregulare:
  • Refer to Section 3.1 on checking for height differences during assembly. If the issue persists, contact support.
• Obstacle Detection Triggered:
  • If the desk stops unexpectedly, check for any objects in its path. Remove the obstruction and try adjusting the height again.
• Rumori inusuali:
  • Minor operational noise is normal. If you hear loud grinding or unusual sounds, stop using the desk and contact support.

For issues not covered here, please contact FLEXISPOT customer service.

8. Garanzia è Support

FLEXISPOT is committed to providing excellent after-sales service. Your EF1 Electric Standing Desk comes with a comprehensive warranty and dedicated support.

• Garanzia di u fabricatore: Enjoy a 5-year free long-term manufacturer's warranty. There is no limit to the number of support requests during the warranty period, providing you with complete peace of mind.
• Domestic Support System: FLEXISPOT has established a dedicated call center in Japan to ensure better after-sales service for our customers.
• Supportu di lingua: In the event that you require support, assistance will be provided in Japanese, eliminating any language barriers.
• Video di l'assemblea: Detailed assembly videos are available on the product detail page for your convenience.

For any inquiries or support needs, please contact FLEXISPOT customer service through the official channels.