Manuale d'istruzzioni di a stazione meteo senza filu TFA Dostmann 35.1150.01

1. Introduzione

Welcome to your new TFA Dostmann 35.1150.01 Wireless Weather Station. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device to ensure optimal performance and longevity. Please read this manual thoroughly before using the weather station.

Figura 1: The main display unit of the TFA Dostmann 35.1150.01 Wireless Weather Station, showing outdoor and indoor temperature/humidity, weather forecast, moon phase, relative pressure history, and time/date.

2. Cuntenutu di u pacchettu

Verificate u cuntenutu di u pacchettu per assicurà chì tutti l'articuli sò presenti:

• TFA Dostmann 35.1150.01 Main Display Unit
• Wireless Outdoor Temperature/Humidity Sensor
• Manuale d'istruzzioni

3. Informazioni di sicurezza

Osservate e seguenti precauzioni di sicurezza per impedisce danni à u dispusitivu o ferite persunale:

• Do not expose the main unit to extreme temperatures, direct sunlight, or moisture.
• The outdoor sensor is weather-resistant but should be placed in a sheltered location to prolong its lifespan.
• Aduprate solu u tipu di batteria specificatu (AA) è assicuratevi di a polarità curretta durante l'installazione.
• Ùn mischjà pile vechji è novi, o sfarenti tippi di batterie.
• Eliminate subitu e batterie scariche per impedisce perdite.
• Mantene e batterie fora di a portata di i zitelli.
• Ùn pruvate micca di smuntà o riparà u dispusitivu da per voi. Cuntattate u persunale qualificatu per l'assistenza.

4. Setup

4.1 Installazione di batterie

1. Unità di visualizazione principale: Open the battery compartment cover on the back of the main unit. Insert 3 new AA batteries, observing the correct polarity (+/-). Close the cover.
2. Sensore esterno wireless: Open the battery compartment cover on the back of the outdoor sensor. Insert 2 new AA batteries, observing the correct polarity (+/-). Close the cover.

4.2 Sensor Placement

For accurate readings and optimal wireless transmission:

• Place the outdoor sensor in a location that is sheltered from direct sunlight and rain.
• Ensure the sensor is mounted vertically and away from heat sources (e.g., vents, windows) or cold sources (e.g., air conditioning units).
• The maximum transmission range between the main unit and the sensor is approximately 100 meters (330 feet) in open areas. Walls, metal structures, and electronic devices can reduce this range.

Figura 2: The wireless outdoor temperature and humidity sensor, designed for remote placement.

4.3 Sincronizazione iniziale

After inserting batteries into both units, the main display unit will automatically search for the outdoor sensor. This process may take a few minutes. Once connected, the outdoor temperature and humidity readings will appear on the main display.

• If the outdoor readings do not appear, press the 'SEARCH' or 'CHANNEL' button on the main unit (if available) to initiate a manual search.
• Ensure both units are within range and free from interference.

5. Funziunamentu di a stazione meteorologica

5.1 Mustrà Overview

L'unità di visualizazione principale furnisce una panoramica cumpletaview of weather data:

• Sezzione Esterna: Displays current outdoor temperature and humidity, along with signal strength for the wireless sensor.
• Sezzione Interna: Mostra a temperatura è l'umidità interna attuali.
• Previsione: Weather forecast icons (e.g., sunny, cloudy, rainy) based on atmospheric pressure changes.
• Fase lunare: Indicates the current phase of the moon.
• Relative Pressure History: A bar graph showing atmospheric pressure trends over the last 12 or 24 hours.
• Ora è Data: Displays the current time, day of the week, and date.

5.2 Funzioni di i buttoni (generali)

While specific button labels may vary, common functions include:

• MODE/SET: Used to cycle through display modes or enter setting mode.
• UP/DOWN (or +/-): Used to adjust values during setting mode or view dati storichi.
• CANALE: If multiple outdoor sensors are supported, this button cycles through sensor channels.
• ALLERTA: To set temperature or humidity alerts.

5.3 Impostazione di l'ora è a data

Refer to the specific instructions in your manual for detailed steps on setting the time, date, and alarm functions. Typically, this involves pressing and holding the 'SET' or 'MODE' button to enter setting mode, then using 'UP'/'DOWN' buttons to adjust values and 'SET'/'MODE' to confirm and move to the next setting.

5.4 Unit Selection (°C/°F)

Most weather stations allow you to switch between Celsius (°C) and Fahrenheit (°F) for temperature readings. Look for a dedicated button or a setting option within the 'SET' menu.

6. Mantenimentu

• Pulizia: Asciugate l'unità di visualizazione è u sensore cù un pannu dolce èamp tela. Ùn aduprate micca detergenti abrasivi o solventi.
• Sustituzione di batterie: Replace batteries in both units when the low battery indicator appears on the display. Always replace all batteries in a unit at the same time.
• Cura di i sensori: Periodically check the outdoor sensor for debris or insect nests that might obstruct its ventilation openings.

7. Risoluzione di prublemi

8. Specifiche tecniche

Figura 3: The main display unit with indicated dimensions: 17.5 cm width, 16.5 cm height, and 3.2 cm depth.

9. Garanzia è Support

TFA Dostmann products are manufactured with quality and precision. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official TFA Dostmann website. For technical support or service inquiries, please contact your retailer or the TFA Dostmann customer service department.

Per piacè cunservate a vostra prova d'acquistu per qualsiasi reclamu di garanzia.