Amico 3 Head LED Security Light with Motion Sensor (Model PD-1711)

1. Introduzione

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Amico 3 Head LED Security Light with Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and adherence to safety guidelines are crucial for optimal performance and user safety.

Informazioni di sicurezza

• Disattivate sempre l'alimentazione à l'interruttore automaticu prima di l'installazione o di a manutenzione.
• L'installazione deve esse effettuata da un elettricista qualificatu o da una persona chì cunnosce bè a custruzzione è u funziunamentu di u pruduttu è i periculi implicati.
• Assicuratevi chì tutti i cunnessione elettriche sianu conformi à i codici è l'ordinanze lucali.
• Ùn installate micca nantu à superfici chì ùn sò micca strutturalmente solide.
• Avoid looking directly into the LED light source when illuminated.

2. Caratteristiche di u produttu

The Amico 3 Head LED Security Light is designed for outdoor use, offering adjustable lighting and motion detection capabilities.

• Alta luminosità è efficienza energetica: Outputs 40W, 4000 Lumens, 5000K (Daylight White) equivalent to 200W halogen light, reducing electricity consumption.
• Tre modi di illuminazione: Features Motion Detection, Dusk-to-Dawn (D2D), and Always-On modes for versatile operation.
• Sensore di muvimentu regulabile: 180-degree swiveling angle with a detection distance of up to 75 feet.
• Durabile è resistente à l'intemperie: IP65 waterproof rating protects against rain, sleet, or snow. Constructed with aluminum for excellent heat dissipation and extended lifespan.
• Teste di luce regulabili: Three independently adjustable light heads allow for broad and customized light coverage.

3. Cuntenutu di u pacchettu

Verificate chì tutti i cumpunenti sò presenti prima di principià l'installazione:

• Amico 3 Head LED Security Light Unit
• Bracket di Muntagna
• Viti di montaggio
• Noci di filu
• EVA Pad (for waterproofing)
• Manuale d'istruzzioni

4. Istruzzioni di stallazione

Follow these steps for a secure and functional installation. Ensure power is OFF at the circuit breaker before starting.

1. Preparate a superficia di muntatura: Ensure the junction box is securely installed and accessible.
2. Installa u supportu di montaggio: Fasten the provided mounting bracket to the existing junction box using the supplied screws. Ensure it is firmly attached.
3. Pass Wires Through EVA Pad: Carefully thread the electrical wires from the light fixture through the center hole of the EVA pad. This pad helps create a waterproof seal.
4. Cunnessioni di filu: Connect the wires from the light fixture to the corresponding wires from the junction box using the wire nuts.
   • Green wire (from light) to Green wire (ground from junction box)
   • Black wire (from light) to Black wire (hot from junction box)
   • White wire (from light) to White wire (neutral from junction box)

   Note: Improper wiring may cause the light to be slightly bright even when off.
5. Muntà u luminariu: Align the light fixture with the mounting bracket. Pass the screw through the hole on the light body, align with the hole in the mounting bracket, and tighten securely.
6. Seal the Hole: Block the screw hole with the provided rubber plug to maintain the light's waterproof integrity.
7. Ajustà i capi di luce è u sensore: Adjust the three light heads and the motion sensor to your desired angles for optimal coverage.

Guida Video Installazione

5. Modi upirativu

The Amico Security Light offers three distinct operating modes, controlled by switches and dials on the motion sensor unit. Refer to the diagram below for control locations.

Impostazioni di modu:

• Modu di rilevazione di muvimentu: The light activates when motion is detected within its range and turns off after a set time. Adjust the 'DISTANCE' dial to H (High), M (Medium), or L (Low) for sensitivity, and the 'TIME' dial to 1, 3, or 10 minutes for illumination duration.
• Dusk-to-Dawn (D2D) Mode: The light automatically turns on at dusk and off at dawn. To activate, set the 'DISTANCE' dial to 'D2D' and the 'TIME' dial to your desired duration (1, 3, or 10 minutes). The light will remain on for the set duration after dusk.
• Modu sempre attivu: For continuous illumination, set the 'DISTANCE' dial to 'D2D' and the 'TIME' dial to 'TEST'. The light will remain on until manually switched off or the settings are changed. This mode can also be controlled by a wall switch.

Operating Modes Video Guide

6. Mantenimentu

Regular maintenance ensures the longevity and optimal performance of your security light.

• Pulizia: Pulite periodicamente i capi di e luci è a lente di u sensore di muvimentu cù un pannu dolce è detergente.amp tela. Ùn aduprate micca detergenti abrasivi o solventi.
• Ispezione: Annually inspect the wiring and mounting for any signs of wear, damage, or loose connections. Ensure the waterproof seals are intact.
• Fattori ambientali: Keep the motion sensor clear of obstructions like tree branches or debris that could interfere with its detection capabilities.

7. Risoluzione di prublemi

If you encounter issues with your Amico Security Light, refer to the following common problems and solutions:

8. Specificazioni

9. Garanzia infurmazione

The Amico 3 Head LED Security Light (Model PD-1711) comes with a 5-year limited warranty. For specific terms and conditions, please refer to the warranty card included in your product packaging or contact Amico customer support.

10. Assistenza Clienti

For any questions, technical assistance, or warranty claims, please contact Amico customer support through the official Amico websitu o l'infurmazioni di cuntattu furnite in l'imballu di u vostru pruduttu.