Ubiquiti UAP-IW-HD UniFi in-Wall 802.11ac Wave2 Wi-Fi Access Point

1. Introduzione

This manual provides detailed instructions for the installation, configuration, and operation of the Ubiquiti UAP-IW-HD UniFi in-Wall 802.11ac Wave2 Wi-Fi Access Point. The UAP-IW-HD is designed to deliver high-performance Wi-Fi coverage within indoor environments, integrating discreetly into standard in-wall electrical junction boxes. It supports the latest 802.11ac Wave2 Wi-Fi standard, offering fast wireless speeds and improved efficiency.

2. Informazioni di sicurezza

Please read, follow, and keep these instructions. Heed all warnings. Only use attachments/accessories specified by the manufacturer.

• Ventilazione: Ùn bluccate micca alcuna apertura di ventilazione. Installate secondu l'istruzzioni di u fabricatore.
• Fonte di energia: Only use power supplies specified by the manufacturer. This device is designed to be powered by Power over Ethernet (PoE).
• Installazione: Installation should be performed by qualified personnel. Ensure proper grounding.
• Ambiente: Ùn installate micca vicinu à fonti di calore cum'è radiatori, registri di calore, stufe, o altri apparecchi (cumpresu amplifiers) that produce heat. Do not expose to dripping or splashing.

3. Cuntenutu di u pacchettu

Verificate chì i seguenti articuli sò inclusi in u vostru pacchettu:

• Ubiquiti UAP-IW-HD UniFi in-Wall 802.11ac Wave2 Wi-Fi Access Point
• Piastra di muntatura
• Viti è Ancora Murale
• Guida di avviamentu rapidu (micca inclusa in questu manuale digitale)

4. Produttu Finituview

The UAP-IW-HD is designed for discreet in-wall installation, providing robust Wi-Fi and wired connectivity.

Figura 1: Fronte View. This image displays the front of the UAP-IW-HD, featuring its clean white design, a subtle blue LED indicator at the top, and the UniFi logo.

Figura 2: Angulata View. An angled perspective of the device, highlighting its slim profile and the location of the reset button on the side.

Figure 3: Bottom Ports. This image shows the bottom edge of the UAP-IW-HD, revealing four Gigabit Ethernet ports. One port supports PoE Passthrough (PoE OUT/LAN1), while the others are standard LAN ports.

Figura 4: Posteriore View. The back of the device, illustrating the mounting points and the primary 'PoE IN + DATA' Ethernet port used for power and uplink connection.

Status di l'indicatore LED

• Turchinu: Device is powered on and operating correctly.
• Blu lampeggiante: Device is booting up or being located in the UniFi Controller.
• Off: Device is powered off or LED is disabled in UniFi Controller.

5. Setup è Installazione

The UAP-IW-HD is designed for in-wall installation, replacing a standard wall plate.

5.1. Prerequisites

• A standard single-gang or double-gang electrical junction box in the wall.
• An Ethernet cable run to the junction box, connected to a PoE+ (802.3at) compliant switch or PoE injector.
• A computer with the UniFi Network Controller software installed (available from ui.com/download/unifi).

5.2. Installazione Hardware

1. Prepare the Junction Box: Ensure power to the junction box is off. Remove the existing wall plate.
2. Cunnessione Ethernet: Connect the Ethernet cable from your PoE+ source to the 'PoE IN + DATA' port on the back of the UAP-IW-HD (refer to Figure 4).
3. Muntà u dispusitivu: Align the UAP-IW-HD with the junction box. Secure it using the provided screws. Ensure the device is flush with the wall.
4. Power On: Restore power to the junction box. The LED indicator on the UAP-IW-HD should illuminate blue (possibly flashing initially).

5.3. Software Configuration (UniFi Network Controller)

1. Launch Controller: Open the UniFi Network Controller software on your computer.
2. Scopre u dispositivu: The UAP-IW-HD should appear in the 'Devices' section as 'Pending Adoption'.
3. Adopt Device: Click 'Adopt' next to the UAP-IW-HD. The controller will provision the device. This may take a few minutes.
4. Cunfigurà u Wi-Fi: Once adopted, navigate to 'Settings' > 'Wi-Fi' to create or modify your wireless networks (SSIDs).
5. Configure LAN Ports: The LAN ports on the bottom of the UAP-IW-HD can be configured for network access. The 'PoE OUT/LAN1' port can provide PoE passthrough to power another device (e.g., a VoIP phone).

6. Funziunamentu di u puntu d'accessu

Once configured, the UAP-IW-HD operates as a high-performance Wi-Fi access point and a wired network switch.

• Funzionamentu Dual-Band: The device simultaneously broadcasts Wi-Fi networks on both 2.4 GHz and 5 GHz frequencies, allowing client devices to connect to the optimal band for performance.
• Connettività cablata: The four Gigabit Ethernet ports provide wired network access for devices such as computers, smart TVs, or other network-enabled equipment.
• PoE Passthrough: The 'PoE OUT/LAN1' port can deliver Power over Ethernet to compatible devices, simplifying cabling for certain installations.
• Gestione: All operational aspects, including Wi-Fi settings, client monitoring, and firmware updates, are managed through the UniFi Network Controller.

7. Mantenimentu

Regular maintenance ensures optimal performance and longevity of your UAP-IW-HD.

• Actualizazioni di firmware: Regularly check for and apply firmware updates via the UniFi Network Controller to ensure security and access to new features.
• Pulizia: Gently wipe the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or aerosol sprays.
• Cuntrolla ambientale: Ensure the area around the device remains free from obstructions to maintain proper ventilation.

8. Risoluzione di prublemi

If you encounter issues with your UAP-IW-HD, refer to the following common solutions:

• U dispositivu ùn si accende micca:
  • Verify the Ethernet cable is securely connected to the 'PoE IN + DATA' port.
  • Ensure the PoE source (switch or injector) is providing 802.3at compliant power.
  • Check the power supply to the PoE source.
• Device Not Adopted in Controller:
  • Ensure the UAP-IW-HD and the UniFi Controller are on the same network segment or that routing is correctly configured.
  • Try restarting the UniFi Network Controller software.
  • Perform a factory reset on the UAP-IW-HD by pressing and holding the reset button (refer to Figure 2) for approximately 10 seconds.
• Scarse prestazioni di u Wi-Fi:
  • Check for potential interference from other wireless devices or networks.
  • Assicuratevi chì u firmware di u dispusitivu sia aggiornatu.
  • Adjust Wi-Fi channel and power settings in the UniFi Controller.

9. Specificazioni

10. Garanzia è Support

Ubiquiti products are covered by a limited warranty. For detailed warranty information, please refer to the official Ubiquiti website. For technical support, documentation, and community forums, visit community.ui.com or help.ui.com.