ECOELER 6-inch Dimmable LED Disk Light Instruction Manual

1. About Your ECOELER LED Disk Light

The ECOELER 6-inch Dimmable LED Disk Light is a high-quality, energy-efficient lighting solution designed for various indoor applications. This fixture provides bright, warm white illumination and features a low-profile design for seamless integration into your ceiling.

• Alta qualità: Features a 7.3-inch round metal light cover for corrosion protection and rust prevention. Equipped with high-quality LED chips, it delivers 1000 lumens at 16.5 watts, ensuring well-balanced light with no flickering and an estimated lifespan of 50,000 hours.
• Liscia Dimmerabile: Offers a full range of seamless dimming from 5% to 100%, allowing precise control over brightness for any situation, from a soft night glow to bright task lighting.
• Bassa Profile Disegnu: The ultra-thin 0.9-inch design provides a sleek look, ideal for spaces with low ceilings or for achieving a modern aesthetic.
• Ampie applicazioni: Adatta per damp locations, making it perfect for entrances, living rooms, bedrooms, kitchens, dens, and covered outdoor areas.
• Sicurezza assicurata: ETL and FCC listed, ensuring compliance with safety and quality standards.

2. Cuntenutu di u pacchettu

Verificate chì tutti i cumpunenti sò presenti prima di principià l'installazione:

• LED Disk Light Fixture (4 units)
• E26 Adapter and Spring Clips
• Installation Screws (Short and Long)
• Noci di filu
• Manuale d'istruzzioni

3. Informazioni di sicurezza

Please read and understand all instructions before installing or operating this product. Failure to do so may lead to electric shock, fire, or other hazards that could cause injury or property damage.

• ATTENZIONE: Rischiu di scossa elettrica. Disconnect l'alimentazione à u fusible o circuit breaker prima di stallà o di serviziu.
• ATTENZIONE: Risk of fire. Use only in circuits rated for 120V AC.
• Stu pruduttu deve esse stallatu in cunfurmità cù u codice di installazione applicabile da una persona familiarizata cù a custruzzione è u funziunamentu di u pruduttu è i periculi implicati.
• Assicuratevi chì tutti i cunnessione elettriche sianu sicure è currette.
• Do not modify the fixture or use it for any purpose other than its intended use.
• Ùn manighjà micca l'attrezzatura cù e mani umide.
• Adatta per damp lochi.

4. Istruzzioni di stallazione

The ECOELER LED Disk Light can be installed into either a standard junction box or a recessed can (5-inch or 6-inch).

4.1. Junction Box Installation

1. Spegne l'energia: Assicuratevi chì l'alimentazione sia scollegata à l'interruttore automaticu prima di inizià.
2. Eliminate a lente: Gently twist the light lens counter-clockwise to remove it from the fixture base.
3. Cunnette u cablaggio: Connect the supply wires from the junction box to the fixture wires using the provided wire nuts (black to black, white to white, ground to ground).
4. Attach fixture to junction box: Align the fixture base with the junction box and secure it using the provided screws.
5. Reattach lens: Twist the lens clockwise onto the fixture base until secure.
6. Ripristinà a putenza: Riattivate u putere à u circuit breaker.

4.2. Recessed Can Installation

1. Spegne l'energia: Assicuratevi chì l'alimentazione sia scollegata à l'interruttore automaticu prima di inizià.
2. Eliminate a lente: Gently twist the light lens counter-clockwise to remove it from the fixture base.
3. Install E26 adapter: Screw the E26 adapter into the existing recessed can socket.
4. Cunnette u cablaggio: Connect the fixture wires to the E26 adapter wires using the provided wire nuts (black to black, white to white).
5. Install spring clips: Attach the spring clips to the designated slots on the fixture base.
6. Push disk into can: Carefully push the LED disk light into the recessed can until the spring clips hold it securely in place, flush with the ceiling.
7. Reattach lens: Twist the lens clockwise onto the fixture base until secure.
8. Ripristinà a putenza: Riattivate u putere à u circuit breaker.

5. Operating Instructions

The ECOELER LED Disk Light is designed for simple operation and offers smooth dimming capabilities.

5.1. Turning On / Off

Operate the light using a standard wall switch connected to the fixture's circuit.

5.2. Funzione di oscuramentu

This fixture is compatible with most standard LED dimmers, allowing for smooth brightness adjustment from 5% to 100%. To dim the light, use a compatible dimmer switch (not included) installed in your electrical system.

6. Mantenimentu

The ECOELER LED Disk Light requires minimal maintenance.

• Pulizia: Per pulisce l'apparecchiatura, assicuratevi chì l'alimentazione sia spenta. Aduprate un pannu dolce, asciuttu o ligeramente asciugatu.amp pannu. Ùn aduprate micca prudutti chimichi aggressivi o detergenti abrasivi, postu chì puderanu dannà a finitura o i cumpunenti elettrichi.
• Nisuna parte riparabile da l'utilizatori: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the fixture.

7. Risoluzione di prublemi

If you experience issues with your ECOELER LED Disk Light, refer to the following common problems and solutions:

If problems persist, contact ECOELER customer support for assistance.

8. Specificazioni

9. Garanzia è Support

ECOELER products are designed for quality and durability. This product comes with a limited warranty.

• Garanzia: Refer to the product packaging or ECOELER's official websitu per i termini è e cundizioni di garanzia specifichi.
• Assistenza Clienti: If you encounter any problems during use or have questions regarding installation or operation, please contact ECOELER customer service. We aim to provide a reply within 24 hours.