Introduzione
Thank you for choosing the Baseus 10W Automatic Clamping Wireless Car Charger Mount. This device is designed to provide convenient and fast wireless charging for your Qi-enabled smartphone while securely holding it in your vehicle. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.
Informazioni di sicurezza
- Ùn disassemble o mudificà u pruduttu.
- Tenite luntanu da l'acqua, u focu è e temperature elevate.
- Evitate impatti forti o cascà u dispusitivu.
- Assicuratevi una ventilazione curretta intornu à u caricatore durante l'usu.
- Use only with compatible power sources (QC 3.0 car charger recommended for fast charging).
Cuntenutu di u pacchettu
- Baseus Wireless Car Charger Mount
- Air Vent Clip (1x)
- Micro USB Cable (4.9ft)
- Manuale d'usu
Product Overview
The Baseus Wireless Car Charger Mount features an automatic clamping mechanism, Qi wireless charging, and an air vent mounting system. It is designed for easy one-hand operation.
Cumpunenti chjave:
- Pad di carica: The surface where the phone rests for wireless charging.
- Cl automaticuamping Arms: Securely hold the phone in place.
- Infrared Induction Sensor: Detects the phone for automatic clamping.
- One-Tap Release Button: Located on the side, releases the clampin braccia.
- Clip di ventilazione: Attaches the mount to your car's air vent.
- Portu Micro USB: Per l'input di energia.
Istruzzioni di stallazione
1. Attaching the Air Vent Clip
- Unscrew the nut on the back of the charger mount.
- Insert the ball joint of the air vent clip into the nut, then into the socket on the back of the charger.
- Tighten the nut to secure the clip to the charger.
2. Mounting to the Car Air Vent
- Choose a suitable air vent in your vehicle. The clip is designed for various vent types, as shown in the image below.
- Gently push the air vent clip onto one of the vent blades until it is securely attached.
- Adjust the angle of the charger mount for optimal viewing.
This image illustrates the different types of car air vents that are compatible with the charger mount's clip. Ensure your car's vent matches one of the compatible designs for secure installation.
3. Connecting Power
- Connect the Micro USB cable to the charging port on the bottom of the charger mount.
- Plug the other end of the USB cable into a car charger (not included). For 10W fast charging, a QC 3.0 car charger is required. Standard 5V/2A car chargers will provide 5W charging.
- The indicator light on the charger will illuminate, indicating it is powered on and ready for use.
Istruzzioni di funziunamentu
1. Placing Your Phone
- Hold your Qi-enabled smartphone near the charging pad. The infrared induction sensor will detect your phone.
- The automatic clamping arms will open. Place your phone onto the charging pad.
- U clamping arms will automatically close, securing your phone and initiating wireless charging.
This image illustrates how the infrared sensor detects a phone, causing the arms to automatically open and then clamp shut once the phone is placed, initiating charging.
2. Removing Your Phone
- To release your phone, gently touch the sensor button located on the right side of the charger mount.
- U clamping arms will automatically open, allowing you to remove your phone.
3. Wireless Charging Functionality
The charger supports Qi-enabled phones between 4.0 and 6.5 inches. Charging speeds vary:
- Carica rapida 10W: For compatible Samsung phones (e.g., Galaxy S10/S9/Note 9). Requires a QC 3.0 car charger.
- Carica rapida 7.5W: For compatible iPhones (e.g., iPhone Xs/XR/X/8). Requires a QC 3.0 car charger.
- Carica standard di 5W: For other Qi-enabled devices. Requires a 5V/2A car charger.
Nota impurtante:
- The thickness of your phone case should not exceed 4mm for optimal charging.
- Metal cases or foreign objects between the phone and charger will interfere with wireless charging.
This image provides a visual guide to the wireless charging capabilities, showing 10W, 7.5W, and 5W charging for various phone models and the requirement for a QC 3.0 car charger for fast charging.
4. Video di Dimustrazione di u Produttu
Watch this video for a visual demonstration of the Baseus Wireless Car Charger Mount's features and operation.
Stu video furnisce una panoramica dettagliataview and demonstration of the Baseus Wireless Car Charger Mount, showcasing its automatic clamping, wireless charging, and ease of use.
Mantenimentu
- Pulite a superficia di u caricatore cù un pannu dolce è asciuttu. Ùn aduprate micca detergenti abrasivi o solventi.
- Ensure the air vent clip is free from dust and debris to maintain a secure grip.
- Regularly check the Micro USB cable for any signs of wear or damage.
Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| U telefunu ùn si carica micca senza filu. | 1. Phone not Qi-enabled. 2. Phone not properly aligned. 3. Phone case too thick or contains metal. 4. Insufficient power input. | 1. Verify phone supports Qi wireless charging. 2. Re-position phone on the charging pad. 3. Remove phone case or use a thinner, non-metallic case. 4. Ensure a QC 3.0 car charger is used for fast charging, or a 5V/2A for standard charging. |
| Clamping arms not opening/closing automatically. | 1. Nisuna putenza à u charger. 2. Sensor obstructed. 3. Malfunzione. | 1. Check power connection and car charger. 2. Ensure the infrared sensor is clean and unobstructed. 3. Cuntattate l'assistenza à i clienti se u prublema persiste. |
| Charger mount is loose on the air vent. | Improper installation or incompatible vent type. | Ensure the air vent clip is fully engaged with a vent blade and the nut is tightened. Verify vent compatibility. |
Specificazioni
- Marca: Baseus
- Tipu di cunnessu: USB, Wireless
- Dispositivi cumpatibili: Qi-enabled Smartphones (4.0"-6.5")
- Modelli di telefuni cumpatibili: iPhone Xs, Xs Max, XR, X, 8, 8 Plus; Samsung Galaxy S10, S10 Plus, S10e, S9, S9 Plus, S8, S8 Plus, S7, S7 edge, S6 edge plus, Note 9, Note 5 series devices.
- Caratteristica speciale: Carica rapida
- Culore: Neru
- Input Voltage: 9 Volts
- Ampera: 1.67 Amps
- Porti USB totali: 1
- Pesu di l'articulu: 10.2 once
- Dimensioni di u pacchettu: 8.15 x 4.45 x 2.91 inch
Garanzia è Supportu
This Baseus Wireless Car Charger Mount comes with an guaranzia di 18 mesi from the date of purchase. Baseus also provides serviziu à u cliente à vita per stu pruduttu.
For warranty claims, technical support, or any inquiries, please refer to the contact information provided with your purchase or visit the official Baseus websitu.
