Beghelli 19432 LED Emergency Lamp Manuale d'usu

Introduzione

This manual provides essential information for the safe and efficient use of your Beghelli 19432 LED Emergency Lamp. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper functioning and to prevent damage or injury.

The Beghelli 19432 is a high-performance LED emergency lamp designed for reliable illumination during power outages or emergency situations. It features a robust polycarbonate construction and a powerful 1200 lumen LED light source with Li-Fe battery technology.

Informazioni di sicurezza

Rispettate sempre e seguenti linee guida di sicurezza per prevene scosse elettriche, incendi o ferite:

• Assicuratevi chì l'alimentazione hè scollegata prima di a stallazione o di mantenimentu.
• L'installazione deve esse effettuata da un elettricista qualificatu in cunfurmità cù i codici elettrici lucali.
• Ùn espone micca u lamp à l'umidità eccessiva o à temperature estreme.
• Do not attempt to open or modify the lamp housing, as this may void the warranty and pose a safety risk.
• Mantene i materiali di imballaggio fora di i zitelli.

Cuntenutu di u pacchettu

Verificate chì tutti i cumpunenti sò presenti è senza danni:

• Beghelli 19432 LED Emergency Lamp unità
• Integrated Li-Fe Battery
• Accessori di montaggio (viti, tasselli murali)
• Manuale d'uso (stu documentu)

Installazione è installazione

The Beghelli 19432 emergency lamp is designed for wall mounting. Follow these steps for proper installation:

1. Scegli un locu: Select a suitable location for installation, typically near an exit or in a common area, ensuring the light can illuminate the required path during an emergency. The lamp is designed for indoor use in commercial or emergency exit applications.
2. Preparate a superficia di muntatura: Ensure the wall surface is clean, dry, and capable of supporting the lampu pesu di.
3. Marcate i punti di perforazione: Aduprà u lamp's mounting holes as a template to mark the drilling points on the wall.
4. Fori: Drill holes at the marked points using an appropriate drill bit for the wall plugs.
5. Inserite i tasselli murali: Inserite i tappi di muru furniti in i fori perforati.
6. Montà a Lamp: Assicurà u lamp to the wall using the provided screws. Ensure it is firmly attached.
7. Connect Power: Cunnette u lamp to the main power supply according to the wiring diagram (refer to the diagram usually found inside the lamp's cover or on a separate sheet, not provided here). Ensure correct polarity and secure connections. The lamp is battery-operated but requires a constant power supply to keep the battery charged and for automatic operation.
8. Carica iniziale: After installation, allow the lamp to charge for at least 24 hours before its first use to ensure the battery is fully charged.

Image: The Beghelli 19432 LED Emergency Lamp, featuring its sleek white polycarbonate housing and the transparent light diffuser, designed for efficient light distribution.

Istruzzioni di funziunamentu

The Beghelli 19432 operates automatically:

• Funzionamentu normale: When connected to the main power supply, the lamp's battery will charge, and the lamp will remain off (or in standby mode, depending on configuration).
• Modu d'emergenza: In casu di mancanza di corrente, u lamp will automatically switch on, providing 1200 lumens of illumination from its internal Li-Fe battery.
• Ritornu à a nurmalità: Once main power is restored, the lamp will automatically switch off and begin recharging its battery.
• Test Button (if applicable): Some models may include a test button to manually check the emergency function. Press and hold the button to simulate a power outage and verify the lamp illuminates. Release the button to return to normal operation. (Note: Specific button location and function may vary; refer to product labeling if present.)

Mantenimentu

Regular maintenance ensures the longevity and reliability of your emergency lamp:

• Pulizia: Pulite u lampL'esternu cù un pannu dolce è asciuttu. Ùn aduprate micca detergenti abrasivi o solventi.
• Verificazione di a batteria: Perform a monthly functional test by simulating a power outage (e.g., by pressing the test button or temporarily disconnecting power) to ensure the battery holds a charge and the lamp illuminates for the specified duration.
• Annual Discharge Test: Annually, perform a full discharge test. Disconnect the main power supply and allow the lamp to operate until the battery is fully depleted. Then, reconnect power and allow it to recharge for 24-48 hours. This helps maintain battery health.
• Sustituzione di batterie: The integrated Li-Fe battery has a long lifespan but will eventually require replacement. This should only be performed by qualified personnel. Contact Beghelli support for authorized service.
• Lamp Sustituzione: The LED light source is designed for long-term use and is generally not user-replaceable. If the LEDs fail, the entire unit may need replacement.

Risoluzione di prublemi

Vede a tavula quì sottu per i prublemi cumuni è e so suluzioni:

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Beghelli customer support.

Specificazioni

Garanzia è Supportu

For warranty information, please refer to the documentation provided with your purchase or visit the official Beghelli website. Beghelli products are designed for durability and performance.

For technical support, service, or inquiries regarding replacement parts, please contact Beghelli customer service through their official channels. Contact information can typically be found on the Beghelli websitu o nantu à l'imballu di u pruduttu.

Informazioni di riciclamentu: For information on recycling this product, particularly the lamp and battery components, please refer to local regulations and recycling guidelines. Specific information regarding lamp recycling and disposal of broken or damaged lamps can often be found on the manufacturer's website or through local waste management services.