Transpocket 180 Stick Welder User Manual
Marca: Fronius | Mudellu: 4075215631
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Fronius Transpocket 180 Stick Welder.
1. Introduzione
The Fronius Transpocket 180 is a highly portable and robust stick welder designed for various welding applications. It incorporates advanced features such as HotStart, SoftStart, and anti-stick technology to ensure a smooth and stable welding process. This manual will guide you through the proper use and care of your welding machine.
2. Setup è Installazione
Before operating the Transpocket 180, ensure proper setup to guarantee safety and optimal performance.
- Unpacking: Carefully remove the welder and all accessories from the packaging. Inspect for any signs of damage during transit.
- Cunnessione di putenza: Connect the welder to a suitable power supply. Ensure the mains voltage and frequency match the specifications of the machine (50-60Hz). The recommended mains fuse is 16A / 20A.
- Terra Clamp Cunnessione: Attaccate bè u cl di terraamp to the workpiece or a clean, bare metal surface that is part of the electrical circuit. A good ground connection is crucial for stable arc.
- Cunnessione di u supportu di l'elettrodu: Connect the electrode holder cable to the appropriate terminal on the welder. Insert the desired electrode into the holder.
- Ventilazione: Ensure adequate ventilation around the welder to prevent overheating. Do not block air vents.
3. Operating Instructions
The Transpocket 180 is designed for ease of use with its single knob operation and clear 7-segment Dot matrix display.
- Power On: Turn on the welder using the main power switch. The display will illuminate.
- Aghjustamentu attuale: Use the single control knob to set the desired welding current. The digital display shows the current setting.
- Selezzione di l'elettrodi: The Transpocket 180 supports various electrode types. It includes operating modes specifically designed for Basic 7018 and Cellulose 6010 electrodes. The maximum electrode size supported is 5/32 inches.
- Welding Features:
- HotStart: Provides a brief surge of current at the start of welding to ensure easy arc ignition.
- SoftStart: Ensures a stable and smooth arc start, particularly useful for certain electrode types.
- Anti-Stick: Automatically reduces the welding current if the electrode sticks to the workpiece, allowing the operator to easily remove it without damaging the electrode or the machine.
- Prucessu di saldatura: Maintain proper arc length and travel speed for optimal weld quality. Refer to welding guides for specific techniques based on material and electrode type.
4. Mantenimentu
Regular maintenance ensures the longevity and reliable performance of your Transpocket 180 welder.
- Pulizia: Periodically clean the exterior of the welder with a dry, soft cloth. Ensure air vents are free from dust and debris. The unit features an integrated dust filter.
- Ispezione di u cable: Ispezionate regularmente i cavi di saldatura, u portaelettrodi è a presa di terra.amp per ogni segnu di danni, sfilacciature o cunnessione allentate. Rimpiazzate immediatamente i cumpunenti dannighjati.
- Conservazione: Store the welder in a clean, dry environment away from excessive dust, moisture, and extreme temperatures.
- Serviziu prufessiunale: For internal cleaning or any complex repairs, contact an authorized Fronius service center.
5. Risoluzione di prublemi
This section provides solutions to common issues you might encounter with your Transpocket 180.
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| A saldatrice ùn s'accende micca. | No power supply; tripped circuit breaker; faulty power cable. | Check power connection; reset circuit breaker; inspect and replace power cable if damaged. |
| Unstable or weak arc. | Poor ground connection; incorrect current setting; damp or old electrodes. | Assicuratevi chì a terra sia chjaraamp is on clean metal; adjust current; use fresh, dry electrodes. |
| L'elettrodu si attacca spessu. | Arc length too short; insufficient current; Anti-Stick feature not active. | Increase arc length; increase current; ensure Anti-Stick feature is functioning. |
| Overheating indicator active. | Insufficient ventilation; exceeding duty cycle; high ambient temperature. | Allow welder to cool down; ensure clear airflow around unit; reduce welding time or current. |
6. Specifiche tecniche
Key technical data for the Fronius Transpocket 180 Stick Welder:
| Specificazione | Valore |
|---|---|
| Welding Current / Duty Cycle (10min/40°C) | 180A / 40% |
| Frequenza di rete | 50-60 Hz |
| Fusibile di rete | 16A / 20A |
| Voltage | 20.4V - 27.2V |
| Circuit aperto Voltage | 101.0 V |
| U fabricatore | Fronius |
| Part Number | 4075215631 |
| Pesu di l'articulu | 20.1 liri |
| Paese d'origine | Austria |
| Materiale | Polimeru |
7. Garanzia è Support
For detailed warranty information and technical support, please contact Fronius directly or refer to the official documentation included with your product. Specific warranty terms and conditions may vary by region and purchase date.
Produttore: Fronius
For service or inquiries, please visit the official Fronius websitu o cuntattate u so supportu à i clienti.
