Introduzione
Thank you for choosing the Nanlite LumiPad 25 LED Panel. This manual provides essential information for the safe and effective operation of your device. Please read it thoroughly before use and retain it for future reference.
Precauzioni di sicurità
- Ùn espone micca u dispusitivu à l'acqua o à l'umidità elevata.
- Evitate l'esposizione diretta di l'ochji à a luce LED.
- Use only approved power adapters and batteries.
- Ùn pruvate micca di disassemble o mudificà l'unità.
- Mantene fora di a portata di i zitelli.
Cuntenutu di u pacchettu
Verificate chì tutti l'articuli sò presenti in u vostru pacchettu:
- Nanlite LumiPad 25 LED Panel
- Adattatore di montaggio
- AC Power Adapter (may be sold separately)
- Manuale d'usu
Istituisci
1. Mounting the Light Panel
- Attach the included mounting adapter to the 1/4-inch screw thread located at the bottom of the LumiPad 25.
- Secure the mounting adapter to a compatible light stand or tripod.
- Adjust the angle of the LED panel using the tilt mechanism on the mounting adapter.
2. Alimentazione di u dispusitivu
The LumiPad 25 offers multiple power options:
- Alimentazione AC: Connect the AC power adapter to the DC IN port on the back of the panel, then plug the adapter into a wall outlet.
- Alimentazione di a batteria: Insert two compatible NP-F style batteries (sold separately) into the battery slots on the back of the panel. Ensure correct polarity.
Operazione
1. Power On / Off
Locate the power switch on the back of the panel. Flip the switch to the 'ON' position to power on the light. Flip it to 'OFF' to power off.
2. Ajusting Brightness
Use the 'DIMMER' control knob on the back of the panel to adjust the light output from 0% to 100% brightness. Rotate clockwise to increase brightness and counter-clockwise to decrease.
3. Aghjustà a temperatura di culore
Use the '5600K' control knob on the back of the panel to adjust the color temperature from warm (3200K) to cool (5600K). Rotate clockwise for cooler temperatures and counter-clockwise for warmer temperatures.
Mantenimentu
Pulizia
To clean the LED panel, use a soft, dry cloth. For stubborn marks, a slightly damp Un pannu cù un detergente dolce pò esse adupratu, assicurendu chì nisun liquidu ùn entre in l'apparechju. Ùn aduprate micca detergenti abrasivi o solventi.
Storage
When not in use, store the LumiPad 25 in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove batteries.
Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| A luce ùn accende micca. | No power, faulty connection, or depleted batteries. | Check power adapter connection or replace/recharge batteries. Ensure power switch is ON. |
| Brightness not adjusting. | Dimmer knob not functioning or at minimum/maximum setting. | Rotate the dimmer knob fully in both directions. If issue persists, contact support. |
| Color temperature not changing. | Color temperature knob not functioning or at minimum/maximum setting. | Rotate the color temperature knob fully in both directions. If issue persists, contact support. |
Specificazioni
| Feature | Detail |
|---|---|
| Numero di mudellu | 11-2002 |
| Dimensioni di u produttu | 13.58 x 37 x 9 inches (overall packaging) / 1.2"L x 1.2"W x 1.2"H (unit) |
| Pesu di l'articulu | 7.1 once |
| Luminosità | 2140 lumen (massimu) |
| Temperature di culore | 3200K - 5600K |
| Opzioni di putenza | AC Adapter, NP-F style batteries, DC via D-tap cable |
Garanzia è Supportu
Nanlite products are covered by a limited warranty. For detailed warranty information, technical support, or service inquiries, please visit the official Nanlite websitu o cuntattate u vostru distributore lucale.
Official Nanlite Websitu: www.nanlite.com
