Manuale d'usu di u cuntrollore di carica solare EPEVER 100A MPPT Tracer 10415AN

1. Introduzione

The EPEVER Tracer AN series solar charge controller, including the 100A Tracer 10415AN model, is designed for advanced solar power systems. It features a common negative design and an advanced Maximum Power Point Tracking (MPPT) control algorithm. An integrated LCD displays the operating status, providing real-time system information. This controller is engineered to maximize energy harvest from photovoltaic (PV) arrays by efficiently tracking the maximum power point under various conditions, potentially increasing energy utilization by 10%-30% compared to traditional PWM methods. It incorporates features such as charging power and current limitation, automatic charge reduction at high temperatures, and enhanced communication port protection for improved reliability. The three-stage adaptive charging mode extends battery life and enhances overall system performance, while comprehensive electronic protection functions safeguard system components against installation errors or failures, ensuring safe and reliable long-term operation.

2. Funzioni chjave

• Tecnulugia MPPT Avanzata: Features ultra-fast tracking speed with a tracking efficiency of no less than 99.5%. The maximum DC/DC transfer efficiency reaches 98.6%, with full load efficiency up to 98%.
• Optimized MPP Tracking: The advanced MPPT control algorithm minimizes MPP loss rate and time, ensuring accurate recognition and tracking of multi-peak MPPs across a wider operating voltaga gamma.
• Volu di u Sistema Automaticutage Identificazione: Automatically identifies 12V, 24V, 36V, or 48V system voltages. Includes an automatic control system to limit charging power and current if they exceed rated values.
• Versatile Battery Charging: Supports four charging options: sealed, gel, flooded, and user-defined battery types.
• System Expandability: Supports parallel connection of up to 6 units to expand system capacity. Features an external load switch signal control load relay for diversified load working modes.
• Funzioni di Prutezzione: Includes automatic over-temperature power reduction and battery temperature compensation functions. Ensures 100% full load operation within the specified working environment temperature range during charging and discharging.

3. Produttu Finituview

3.1 Apparizione fisica

The EPEVER Tracer 10415AN MPPT Solar Charge Controller features a robust design with a clear LCD display and control buttons on the front panel. Mounting brackets are integrated on the sides for secure installation.

Figura 3.1: Fronte view of the EPEVER Tracer 10415AN MPPT Solar Charge Controller, showing the LCD screen and control buttons.

3.2 Dimensioni

Understanding the physical dimensions is crucial for proper installation and space allocation. The controller measures approximately 394mm in length, 242mm in width, and 143mm in height.

Figure 3.2: Diagram illustrating the length (L 394mm), width (W 242mm), and height (H 143mm) of the solar charge controller.

3.3 Identificazione di cumpunenti

The rear and side panels of the controller house various terminals and ports for system connections and communication. Refer to the diagram and table below for detailed identification.

Figura 3.3: Detailed view of the controller's terminals and ports, with numbered labels for identification.

4. Setup è Installazione

4.1 Precauzioni di sicurezza

• Ensure all connections are secure and correct before powering on the system.
• Always connect the battery first, then the solar panels, and finally the load. Disconnect in reverse order.
• Use appropriate wire gauges for all connections to prevent overheating and power loss.
• Install the controller in a well-ventilated area, away from direct sunlight, high temperatures, and moisture.
• Ensure proper grounding of the controller.

4.2 Cunnessione finitaview

The controller supports various external connections for enhanced functionality, including remote voltage sensing, temperature sensing, and relay control for generators or loads. The diagram below illustrates these conceptual connections.

Figure 4.1: Diagram showing various connection features such as load control relay, remote voltage sensor, diesel generator relay, RS485, remote temperature sensor, and PV reverse polarity alarm.

4.3 Passi di stallazione

1. Muntà u Controller: Securely mount the controller to a vertical surface in a cool, dry, and well-ventilated location using the integrated mounting holes.
2. Cunnette a batteria: Connect the battery cables to the battery terminals (2) on the controller. Ensure correct polarity (positive to positive, negative to negative).
3. Cunnette i pannelli solari (pannelli fotovoltaici): Connect the solar panel cables to the PV terminals (3) on the controller. Verify correct polarity.
4. Cunnette u Caricu (Opzionale): If using a DC load directly from the controller, connect the load cables to the load terminals (not explicitly numbered in the provided image, but typically adjacent to battery terminals).
5. Connect Grounding: Connect the grounding terminal (12) to an earth ground.
6. Cunnessioni opzionali: Connect any optional accessories such as the Remote Temperature Sensor (RTS Port 9), RS485 communication cable (Port 8), or relay control cables (Ports 4, 6, 7, 10) as required by your system design.

5. Operating Instructions

5.1 Schermu LCD è Navigazione

The controller features an LCD display for monitoring system status and configuring settings. The display provides information on battery voltage, charging current, PV input, and more. Navigation is typically done using 'SELECT' and 'ENTER' buttons.

Figure 5.1: Close-up of the LCD display showing battery voltage and charging status, alongside the high-efficiency heat dissipation aluminum alloy fins.

5.2 Impostazioni di u tipu di batteria

The Tracer 10415AN supports various battery types: Sealed, Gel, Flooded, and User-defined. It is critical to select the correct battery type in the controller's settings to ensure optimal charging and prolong battery life. Refer to the controller's detailed manual for specific steps on how to adjust these settings via the LCD or external communication tools.

5.3 Cuntrollu di carica

The controller can manage DC loads connected directly to its load terminals. It offers programmable load control modes, allowing users to set timers or activate/deactivate the load based on battery voltage or other parameters. This feature helps prevent over-discharge of the battery.

6. Mantenimentu

• Ispezione regulare: Periodically inspect all wiring and connections for loose contacts, corrosion, or damage. Tighten any loose connections.
• Pulizia: Keep the controller clean and free from dust and debris. Ensure the heat dissipation fins are not obstructed to maintain optimal cooling.
• Cuntrolla ambientale: Verificate chì l'ambiente d'installazione resti in i limiti di temperatura è umidità specificati.
• Salute di a batteria: Monitore u voltage and performance regularly. Ensure the battery type setting matches the installed battery.
• Actualizazioni di firmware: Verificate u fabricatore websitu per qualsiasi aghjurnamenti di firmware dispunibili per assicurà prestazioni ottimali è accessu à nuove funzionalità.

7. Risoluzione di prublemi

• Nisuna carica:
  • Check PV array connections and ensure solar panels are receiving adequate sunlight.
  • Verify battery connections and voltage.
  • Check for blown fuses (1).
• Bassa corrente di carica:
  • Ensure PV array voltage and current are within the controller's specifications.
  • Verificate l'ombra nantu à i pannelli solari.
  • Verify battery type settings are correct.
• Caricamentu micca funzionale:
  • Check load connections and ensure the load is not exceeding the controller's rated capacity.
  • Verificate u voltage hè sopra à u bassu voltage impostazione di disconnessione (LVD).
  • Check load control settings on the controller.
• Schermu di u controller spento:
  • Check battery connections and ensure battery voltage hè presente.
  • Ensure the controller is receiving power.
• Codici d'errore: Cunsultate u manuale d'usu cumpletu per una lista di codici d'errore specifichi è i so passi di risoluzione di i prublemi currispondenti.

8. Specifiche tecniche

The EPEVER Tracer 10415AN offers robust performance for various solar applications. Key parameters are detailed below.

Figure 8.1: Table showing key technical parameters for Tracer AN series controllers, including the Tracer 10415AN.

9. Garanzia è Support

EPEVER products typically come with a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official EPEVER website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact the seller or authorized EPEVER service center. The seller for this product is SolaMr-EU.

Per più assistenza, pudete visità u EPEVER Store on Amazon.