1. Produttu Finituview
The VIVOTEK FD9360-H is a high-performance H.265 outdoor dome network camera designed for robust surveillance applications. It features a 2-Megapixel sensor, delivering clear resolution of 1920x1080 at 30 frames per second. Equipped with VIVOTEK's SNV (Supreme Night Visibility) and WDR Pro (Wide Dynamic Range Pro) technologies, this camera excels in capturing high-quality imagery across various lighting conditions, including high contrast and low light environments. The FD9360-H utilizes a 2.8mm lens and integrates IR illuminators for enhanced night vision capabilities, making it suitable for continuous outdoor monitoring.
Figure 1: VIVOTEK FD9360-HF2 2MP IR Outdoor Fixed Dome Network Camera. This image shows the white dome-shaped camera with the VIVOTEK logo on top. The clear dome cover reveals the camera lens and infrared LEDs inside. A white cable extends from the back of the camera, ending in an RJ45 connector.
2. Cuntenutu di u pacchettu
Verificate chì tutti l'articuli elencati quì sottu sò inclusi in u vostru pacchettu. Sè qualchì articulu manca o hè dannighjatu, cuntattate subitu u vostru venditore.
- VIVOTEK FD9360-HF2 Network Camera
- Template di Montaggio
- Viti di muntatura è tasselli murali
- Waterproof Connector Kit
- Guida d'installazione rapida
- Software CD (or link to download)
3. Setup è Installazione
Proper installation is crucial for optimal performance and longevity of your camera. Ensure you have the necessary tools and safety equipment before beginning.
3.1 Selezzione di u situ
Sceglite un locu di muntatura chì furnisce u campu desideratu view, is within range of your network infrastructure, and offers protection from direct impact or vandalism. The camera is rated IP65 for outdoor use.
3.2 Muntà a Camera
- Preparate a superficia: Use the provided mounting template to mark drill holes on the ceiling or wall.
- Fori: Drill pilot holes for the mounting screws and insert wall anchors if necessary.
- Assicurà a basa: Attach the camera's mounting base to the surface using the screws. Ensure it is firmly secured.
- Gestione di Cable: Route the network cable through the designated opening in the mounting base.
3.3 Cunnessione di rete è di putenza
- Cunnessione Ethernet: Connect an RJ45 Ethernet cable to the camera's network port. For outdoor installations, use the waterproof connector kit to ensure a sealed connection.
- Alimentazione via Ethernet (PoE): The FD9360-HF2 supports PoE, simplifying installation by delivering both power and data over a single Ethernet cable. Connect the Ethernet cable to a PoE-enabled switch or injector.
- Alternative Power (if applicable): If PoE is not used, connect a 12V DC power adapter (not included) to the camera's power input.
3.4 Configurazione iniziale
After physical installation, connect to the camera via your network. Refer to the Quick Installation Guide or the full user manual (available on the VIVOTEK website) for detailed instructions on IP address discovery and initial setup using VIVOTEK's utility software.
4. Upirari la Camera
Once configured, the camera can be accessed and managed through a web browser or compatible VMS (Video Management Software).
4.1 Accessu à u Web Interfaccia
- apre a web navigatore (per esempiu, Chrome, Firefox).
- Inserite l'indirizzu IP di a camera in a barra di l'indirizzi è appughjà Enter.
- Log in using the default credentials (refer to your Quick Installation Guide for default username and password, and change them immediately for security).
4.2 Funziunalità è paràmetri chjave
- Live View: Monitorà u flussu video in tempu reale.
- Impostazioni di registrazione: Configure continuous, motion-triggered, or scheduled recording to a network video recorder (NVR) or local storage (if supported).
- Impostazioni di l'Image: Adjust brightness, contrast, saturation, sharpness, and enable/disable WDR Pro and SNV for optimal image quality in varying light conditions.
- Illuminatori IR: The built-in IR illuminators automatically activate in low light to provide clear black and white images in complete darkness.
- Rilevazione di muvimentu: Set up motion detection zones and sensitivity for event-triggered recording and alerts.
- Impostazioni di a rete: Configure IP address, DNS, and other network parameters.
5. Mantenimentu
Regular maintenance ensures the longevity and optimal performance of your VIVOTEK camera.
- Pulizia: Periodically clean the camera's dome cover with a soft, damp cloth. Avoid abrasive cleaners that could scratch the surface. Ensure the lens is free of dust and smudges.
- Actualizazioni di firmware: Check the VIVOTEK official website regularly for firmware updates. Updating firmware can improve performance, add new features, and address security vulnerabilities. Follow the instructions provided by VIVOTEK for firmware upgrade procedures.
- Ispezione di u cable: Periodically inspect all cables for signs of wear, damage, or corrosion, especially for outdoor installations.
- Cuntrolla ambientale: Ensure the camera's environment remains within its specified operating temperature and humidity ranges.
6. Risoluzione di prublemi
This section addresses common issues you might encounter with your VIVOTEK FD9360-HF2 camera.
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| Nisuna alimentazione / A camera ùn si accende micca | No PoE connection; faulty power adapter; damaged cable. | Verify PoE switch/injector is active. Check power adapter and cable connections. Test with a known good power source. |
| Nisun Video Feed | Prublema di cunnessione di rete; indirizzu IP incorrectu; bloccu di firewall. | Check network cable. Ping camera's IP address. Ensure camera and viewing device are on the same network segment. Disable temporary firewalls. |
| Poor Image Quality (Blurry/Dark) | Dirty lens/dome; improper focus (if adjustable); insufficient lighting; incorrect image settings. | Clean the dome and lens. Adjust image settings (brightness, contrast, WDR Pro, SNV). Ensure adequate lighting or proper IR operation. |
| Ùn possu accede Web Interfaccia | Indirizzu IP incorrectu; cunflittu di rete; cumpatibilità di u navigatore. | Confirm camera's IP address. Check for IP conflicts on your network. Try a different web navigatore. Svuota a cache di u navigatore. |
For more complex issues, refer to the full user manual or contact VIVOTEK technical support.
7. Specificazioni
Key technical specifications for the VIVOTEK FD9360-HF2 camera:
- Mudellu: FD9360-HF2
- Risoluzione video efficace: 2 MP (1920x1080)
- Frame Rate: 30 fps
- Lenti: 2.8mm (Fissu)
- Tecnulugia di cunnessione: Wireless (Wi-Fi) and Wired (RJ45)
- Fonte di energia: AC/DC, supports Power over Ethernet (PoE)
- Usu à l'internu / à l'esternu: Outdoor
- Valutazione di Prutezzione Internaziunale: IP65
- Tecnulugia Low Light: Day/Night with IR Illuminators, SNV, WDR Pro
- Dimensioni (L x W x H): 4.61 x 4.61 x 3.53 inch
- Pesu di l'articulu: 0.01 Ounces
- Wattage: 9.5 watts
- UPC: 745560774694
8. Garanzia è Support
VIVOTEK products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VIVOTEK websitu.
For technical assistance, product inquiries, or support, please contact VIVOTEK customer service or visit their support portal:
- VIVOTEK Official Websitu: www.vivotek.com
- Portal di supportu: Riferite à u website for regional support contacts and resources.
