1. Produttu Finituview
The Jansite Motorcycle TPMS (Tire Pressure Monitoring System) M2 is designed to enhance riding safety by providing real-time monitoring of your motorcycle's tire pressure and temperature. This system features an LCD display, external sensors, and multiple alarm functions to alert you to potential tire issues.
Image 1.1: Jansite Motorcycle TPMS M2 display unit and key features.
Funzioni chjave:
- Monitoraghju in tempu reale: Displays tire pressure and temperature simultaneously.
- Display digitale LCD: Clear and compact screen for easy readability.
- Adjustable Alarm Values: Customizable pressure alarm thresholds for various motorcycle models.
- Modi d'allarme multipli: Includes alarms for air leakage, low/high pressure, high temperature, sensor low battery, no signal, and receiver low battery.
- Carica USB Magnetica: Convenient charging for the display unit.
- Waterproof and Dustproof Sensors: Designed for use in all weather conditions.
- Disegnu antifurtu: External sensors include an anti-theft nut.
- Unità cummutabili: Pressure units (Psi/Bar) and temperature units (°C/°F) are switchable.
2. Cuntenutu di u pacchettu
Prima di l'installazione, verificate chì tutti i cumpunenti sò presenti in l'imballu:
Image 2.1: Jansite Motorcycle TPMS M2 package contents.
- 1 x TPMS Display Unit
- 2 x External Sensors (Front Wheel 'FW' and Rear Wheel 'RW')
- 1 x Supportu di Muntatura
- 1 x Cavu di carica USB
- 2 x Dadi antifurtu
- 1 x Chiave
3. Setup è Installazione
3.1 Display Unit Installation
- Attach the mounting bracket to your motorcycle's handlebar or a suitable location using the provided hardware.
- Secure the TPMS display unit onto the mounting bracket.
- Ensure the display unit is positioned for clear visibility during riding.
3.2 Installazione di sensori esterni
Follow these steps to install the external sensors on your motorcycle tires:
Image 3.1: Schematic diagram of external sensor installation.
- Eliminate u tappu di a valvula: Unscrew the original valve cap from the tire valve stem.
- Install Anti-theft Nut: Screw the hexagonal anti-theft nut onto the valve stem. Do not tighten it yet.
- Installà u sensore: Screw the corresponding sensor (FW for front, RW for rear) onto the valve stem. Ensure it is hand-tight.
- Secure Sensor: Use the provided wrench to tighten the anti-theft nut against the sensor. This secures the sensor and prevents theft.
- Verificate per e fughe: Apply soapy water around the valve stem and sensor connection to check for any air leaks. If bubbles appear, re-tighten the sensor and nut.
Nota: Ensure the correct sensor (FW/RW) is installed on the corresponding tire. Incorrect placement may lead to inaccurate readings.
4. Operating Instructions
4.1 Accensione / spegnimentu
- Press and hold the "Power/Selec" button (usually the top button on the side) to turn the display unit on or off.
4.2 Display Information
Image 4.1: Real-time monitoring display of the TPMS unit.
U screnu LCD mostra l'infurmazioni seguenti:
- Front Wheel (FW) Pressure and Temperature
- Rear Wheel (RW) Pressure and Temperature
- Ora attuale
- Battery Level Indicator for the display unit
4.3 Setting Parameters (Pressure/Temperature Units, Alarm Values)
Use the "Menu" button (usually the bottom button on the side) to enter the settings menu. Use the "Power/Selec" button to navigate through options and adjust values.
- Entra in u menu: Press and hold the "Menu" button until the settings interface appears.
- Navigate Options: Short press the "Menu" button to cycle through different settings (e.g., pressure unit, temperature unit, high pressure alarm, low pressure alarm, high temperature alarm).
- Ajustà i valori: When an option is selected, short press the "Power/Selec" button to change the value.
- Salvà è Esci: Press and hold the "Menu" button again to save your settings and exit the menu.
Default Alarm Values: Refer to your motorcycle's manual for recommended tire pressures. Adjust the alarm thresholds accordingly.
4.4 Funzioni di alarme
The system provides visual and audible alerts for the following conditions:
- Air Leakage Alarm: Rapid pressure drop.
- Alarma di bassa pressione: Tire pressure falls below the set low threshold.
- Alarma di alta pressione: Tire pressure exceeds the set high threshold.
- Alarma di alta temperatura: Tire temperature exceeds the set high threshold.
- Sensor Low Battery Alarm: Indicates a low battery in one of the external sensors.
- No Signal Alarm: Loss of communication with a sensor.
- Receiver Low Battery Alarm: Indicates a low battery in the display unit.
When an alarm is triggered, the display will flash the affected parameter, and an audible alert will sound. Address the issue promptly.
5. Mantenimentu
5.1 Charging the Display Unit
- The display unit has a built-in lithium battery. When the receiver low battery alarm activates or the battery indicator is low, connect the unit to a USB power source using the provided magnetic USB charging cable.
- Una carica cumpleta dura di solitu uni pochi d'ore.
5.2 Sustituzione di a batteria di u sensore
The external sensors use replaceable batteries. When a sensor low battery alarm occurs, replace the battery as follows:
Image 5.1: External sensor battery replacement diagram.
- Eliminate u sensore: Use the wrench to loosen the anti-theft nut, then unscrew the sensor from the valve stem.
- Open Sensor Casing: Aprite cù cura u sensore casing. Some models may require a small tool or the provided wrench to pry open.
- Remove Gasket: Remove the waterproofing gasket.
- Replace Battery: Remove the old battery and insert a new CR1632 lithium coin cell battery, ensuring correct polarity.
- Riunisce: Place the waterproofing gasket back correctly, then close the sensor casing.
- Reinstall Sensor: Reinstall the sensor onto the tire valve stem, following the installation steps in Section 3.2.
Nota: Ensure the waterproofing gasket is properly seated to maintain the sensor's waterproof integrity.
5.3 Pulizia
- Wipe the display unit and sensors with a soft, damp tela. Ùn aduprate micca detergenti abrasivi o solventi.
- Assicuratevi chì u portu di carica hè pulitu è asciuttu prima di carica.
6. Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| Display unit does not power on. | Batteria bassa o scarica. | Charge the display unit using the USB cable. |
| No signal from sensor / Inaccurate readings. |
|
|
| Air leakage alarm. |
|
|
| Display shows incorrect time. | Time not set or reset. | Adjust the time through the settings menu (refer to Section 4.3). |
7. Specificazioni
| Parametru | Valore |
|---|---|
| Marca | Jansite |
| Numero di mudellu | M2 |
| Tipu di visualizazione | LCD Digitale |
| Unità di pressione | Psi, Bar |
| Unità di temperatura | °C, °F |
| Tipu di sensor | Esternu |
| Tipu di batteria di u sensore | CR1632 Lithium Coin Cell (replaceable) |
| Batteria di l'unità di visualizazione | Built-in Lithium-ion (rechargeable via USB) |
| Valutazione impermeabile | Sensors are waterproof and dustproof. |
| Dimensioni di u pacchettu | 13.8 x 13.5 x 5.2 cm |
| Pesu di u produttu | 220 grammi |
| UPC | 759337624907 |
Image 7.1: Dimensions and display layout of the TPMS unit.
8. Garanzia è Support
8.1 Garanzia infurmazione
This Jansite TPMS M2 product comes with a 1 anni di garanzia da a data di compra. Questa garanzia copre i difetti di fabricazione è i malfunzionamenti in cundizioni d'usu nurmale.
A garanzia ùn copre i danni causati da:
- Installazione o usu impropriu.
- Dannu accidintali, abusu, o abusu.
- Riparazioni o mudificazioni micca autorizate.
- Natural disasters or external causes.
8.2 Assistenza Clienti
For any questions, technical assistance, or warranty claims, please contact Jansite customer support. Refer to your purchase documentation or the seller's contact information for the most up-to-date support channels.
When contacting support, please have your product model (M2) and purchase details ready.
