Ledlenser TFX Arcturus 6500 Tactical Flashlight User Manual

1. Introduzione

The Ledlenser TFX Arcturus 6500 is a high-performance tactical flashlight engineered for demanding situations. It delivers ultra-bright white light and offers direct access to red, green, or blue light. Designed for law enforcement, security, rescue, survival, and outdoor use, this flashlight combines robust construction with advanced functionality, including a multi-color strobe and extreme water protection.

2. Cuntenutu di u pacchettu

Verificate chì tutti l'articuli seguenti sò inclusi in u vostru pacchettu:

• TFX Arcturus 6500 Flashlight
• Pouch
• Cordino
• Cavu USB
• Battery (3 x 18650 Li-ion)

3. Produttu Finituview

Familiarize yourself with the components of your TFX Arcturus 6500 flashlight.

Figura 1: Pienu view of the TFX Arcturus 6500 Tactical Flashlight, showcasing its robust aluminum body and reflector head.

Figura 2: Close-up of the flashlight's control panel, featuring the silent double front switch and the four-LED battery and charge status indicator.

4. Setup

4.1 Installazione di batterie

1. Svitate u tappu di a lanterna girandulu in sensu antiorariu.
2. Insert the three 18650 Li-ion batteries into the battery compartment, ensuring correct polarity (positive (+) end towards the head of the flashlight).
3. Avvitate u tappu di coda in sensu orariu finu à ch'ellu sia strettu bè.

4.2 Carica iniziale

Before first use, fully charge the flashlight's batteries.

1. Locate the USB charging port, typically protected by a rubber cover.
2. Connect the provided USB cable to the flashlight and to a suitable USB power source (e.g., wall adapter, computer USB port).
3. The four LEDs on the control panel will indicate the charging status. All four LEDs illuminated steadily indicate a full charge.
4. Once fully charged, disconnect the USB cable and ensure the rubber cover is properly sealed to maintain water resistance.

4.3 Attaccu di cordone

Attach the lanyard to the designated loop on the tail cap for secure handling and to prevent accidental drops.

5. Operating Instructions

5.1 Power On/Off and Brightness Modes

The TFX Arcturus 6500 features a silent double front switch for intuitive control.

• Per accende / spegne: Press and hold the main power button (larger button) for approximately 1 second.
• To Cycle Brightness (White Light): With the flashlight on, short press the main power button to cycle through the three brightness levels (High, Medium, Low).
• Funzione Burst: From any mode, double-press the main power button for a momentary burst of maximum output. Release to return to the previous mode.

5.2 Color Light Modes (Red, Green, Blue)

The smaller, secondary button on the control panel allows direct access to color light modes.

• To Activate Color Light: With the flashlight off, press and hold the secondary button. The flashlight will turn on in the last used color mode.
• To Cycle Colors: With the color light on, short press the secondary button to cycle through Red, Green, and Blue.
• To Turn Off Color Light: Press and hold the secondary button again, or press the main power button.

5.3 Multi-Color Strobe

The multi-color strobe function allows the flashlight to flash in all four available colors (white, red, green, blue).

• To Activate Multi-Color Strobe: With the flashlight on (in any white or color mode), double-press the secondary button.
• To Deactivate Multi-Color Strobe: Short press either the main power button or the secondary button.

5.4 Intelligent Memory Function

The flashlight remembers the last used white light brightness level and color light mode. When turned on, it will revert to the previously selected setting.

5.5 Funzione Lock

To prevent accidental activation during transport or storage, the flashlight features a lock function.

• To Activate Lock: With the flashlight off, press and hold both the main power button and the secondary button simultaneously for approximately 3 seconds until the indicator LEDs flash.
• To Deactivate Lock: Repeat the activation process. The indicator LEDs will flash to confirm unlock.

5.6 Battery and Charge Status Display

The four LEDs on the control panel provide real-time battery status and charging progress.

• Status di a batteria: When the flashlight is on, the LEDs indicate the remaining battery capacity. Four LEDs mean full, one LED means low battery.
• Status di carica: During charging, the LEDs will progressively illuminate to show charging progress.

6. Mantenimentu

6.1 Pulizia

• Asciugate u corpu di a torcia cù un pannu dolce èamp tela. Evita i detergenti abrasivi.
• Clean the lens with a lens cleaning cloth to maintain optimal light output.
• Periodically clean the threads of the tail cap and apply a thin layer of silicone grease to maintain water resistance and smooth operation.

6.2 Cura di a batteria

• Always use the recommended 18650 Li-ion batteries.
• Charge batteries regularly, even if the flashlight is not in frequent use, to prolong battery life.
• Store the flashlight in a cool, dry place. For long-term storage, remove the batteries.

6.3 Resistenza à l'acqua (IPX8)

The TFX Arcturus 6500 is rated IPX8, meaning it is protected against continuous immersion in water under conditions specified by the manufacturer. Ensure all caps and covers are securely closed before exposing the flashlight to water.

7. Risoluzione di prublemi

If you encounter issues with your flashlight, refer to the table below for common problems and solutions.

8. Specificazioni

Detailed technical specifications for the TFX Arcturus 6500 Tactical Flashlight.

9. Garanzia è Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or visit the official Ledlenser websitu. Conservate a vostra prova d'acquistu per e richieste di garanzia.