ROBOTIME Monocular Telescope 3D Wooden Puzzle Kit (Model ST004) Instruction Manual

1. Introduzione

Thank you for choosing the ROBOTIME Monocular Telescope 3D Wooden Puzzle Kit. This kit provides a unique and engaging experience to construct a functional monocular telescope from precisely cut wooden pieces. Designed for adults and teens aged 14 and up, this model features a third-order focal monocular telescope with a decorative leather and retro metal nameplate, a separate telescopic support, and an adjustable lens barrel. The assembled telescope offers a real sight distance of up to 150 meters (500 feet).

This manual provides detailed instructions for assembly, operation, and maintenance to ensure a successful and enjoyable building experience.

Figure 1: Fully assembled Monocular Telescope model.

2. Informazioni di sicurezza

• This kit contains small parts. Keep out of reach of children under 3 years of age to prevent choking hazards.
• Exercise caution when handling laser-cut wooden pieces, as some edges may be sharp.
• Do not force pieces together. If a piece does not fit, re-check the instructions and ensure correct orientation.
• Avoid direct exposure to sunlight or extreme temperatures, which may cause the wood to warp or crack.
• Do not look directly at the sun through the telescope, as this can cause severe eye damage.

3. Cuntenutu di u pacchettu

Before beginning assembly, verify that all components are present and undamaged. The kit includes 314 precisely laser-cut wooden pieces, an instruction manual, and necessary accessories. No additional tools or glue are required for assembly.

• Pre-cut wooden sheets (314 pieces)
• Manuale d'istruzzioni illustratu dettagliatu
• Lenses for the telescope
• Decorative leather and metal nameplate
• Small accessories (e.g., chains, rings)

Figura 2: Tutti i cumpunenti inclusi in u kit.

4. Istruzzioni di Assemblea

Assembly of the Monocular Telescope typically takes approximately 20 hours. Follow the detailed illustrated instructions provided in your kit step-by-step. Each wooden piece is numbered for easy identification.

4.1 Preparazione

• Unpack all contents and lay them out on a clean, flat surface.
• Familiarize yourself with the instruction manual, paying attention to the symbols and piece identification.
• Carefully remove pieces from the wooden sheets. Use a small tool (like a toothpick or craft knife, not included) if necessary to gently push out intricate parts. Avoid forcing pieces to prevent breakage.

Figura 3: Esample of wooden sheets with numbered pieces.

4.2 Assemblaggio passu à passu

Follow the numbered steps in your instruction manual. The general process involves:

1. Base and Tripod Assembly: Construct the foldable tripod stand first, ensuring all joints are secure but allow for movement.
2. Telescope Barrel Construction: Assemble the main body of the telescope, including the internal mechanisms for the adjustable lens barrel.
3. Installazione di lenti: Carefully insert the lenses into their designated positions within the barrel.
4. Elementi Decorativi: Attach the decorative leather and metal nameplate, and any other aesthetic components.
5. Assemblea finale: Connect the telescope barrel to the tripod stand, ensuring it can pivot and adjust smoothly.

Figura 4: Esample of an assembly step, attaching the nameplate.

5. Operating Instructions

Once assembled, your ROBOTIME Monocular Telescope is ready for use. It is designed for observation of distant objects with a real sight distance of 150 meters (500 feet).

5.1 Setting Up the Telescope

1. Position the Tripod: Place the tripod on a stable, flat surface. Adjust the legs to achieve the desired height and stability.
2. Adjust Telescope Angle: Gently pivot the telescope barrel on its support to point towards your desired viewa zona.
3. Remove Lens Cap: Take off the protective cap from the eyepiece and objective lens.

5.2 Focusing and Viewing

1. Look Through Eyepiece: Place your eye close to the eyepiece.
2. Adjust Lens Barrel: Gently extend or retract the adjustable lens barrel until the image appears clear and in focus.
3. Osservate: Enjoy observing distant objects. Remember, this is a model telescope and its primary function is as a craft kit and decorative item, with functional viewcapacità di ing.

Figure 5: Steps for operating the Monocular Telescope.

Figure 6: Key features of the Monocular Telescope, including its 150m sight distance.

6. Mantenimentu è Cura

To ensure the longevity and appearance of your wooden telescope model, follow these care guidelines:

• Pulizia: Dust the model regularly with a soft, dry cloth. Avoid using abrasive cleaners or excessive moisture, which can damage the wood.
• Conservazione: Store the model in a dry environment away from direct sunlight, high humidity, or extreme temperature fluctuations.
• Trattamentu: Handle the model gently, especially the delicate parts. Avoid dropping or subjecting it to strong impacts.
• Cura di lenti: Clean the lenses only with a soft, lint-free cloth specifically designed for optics. Do not use harsh chemicals.

7. Risoluzione di prublemi

Sè avete prublemi durante u montaggio o l'operazione, cunsiderate i seguenti punti:

• Pezzi chì ùn si adattanu micca: Double-check the piece numbers and the orientation in the instruction manual. Ensure no excess wood material remains from the laser-cutting process. Do not force pieces.
• Connessioni lasse: If a joint feels loose, ensure the pieces are fully inserted. For persistent looseness, a small amount of wood glue (not included) can be applied, but this is generally not required for the design.
• Unclear image through telescope: Ensure the lens caps are fully removed. Adjust the telescopic lens barrel slowly until the image comes into focus. Verify that the lenses are clean and correctly installed.
• Instabilità di u tripode: Ensure the tripod legs are fully extended and locked into position (if applicable). Place the tripod on a level surface.

8. Specificazioni

Figure 7: Dimensions of the assembled Monocular Telescope.

9. Garanzia è Support

For information regarding warranty, replacement parts, or customer support, please refer to the contact details provided on the product packaging or visit the official ROBOTIME websitu. Conservate a vostra ricevuta di compra cum'è prova di compra.