1. Introduzione
The AODELAN Flash Trigger Receiver is designed to wirelessly trigger external flashes and studio strobes. It operates on a 2.4GHz frequency, offering 8 channels for reliable communication up to 200 meters (656 feet) with a maximum sync speed of 1/250s. This receiver features a universal hot shoe, making it compatible with a wide range of camera brands including Canon, Nikon, Sony (with metal hot shoe), Olympus, Panasonic, Pentax, Fuji, and Samsung.
2. Cuntenutu di u pacchettu
Verificate chì tutti l'articuli elencati quì sottu sò inclusi in u vostru pacchettu:
- Ricevitore x 1
- 3.5 to 3.5 mm Sync Cable x 1
- 3.5 mm to PC Plug Cable x 1
- 1/4" Mono Plug Socket x 1
- Cordini x 1
Image: Package contents of the AODELAN Flash Trigger Receiver.
3. Produttu Finituview
Familiarize yourself with the components of the AODELAN Flash Trigger Receiver:
Image: Labeled components of the AODELAN Flash Trigger Receiver.
- LED di statu: Indicates power and trigger status.
- Channel Adjustment Buttons (CH +/-): Used to select the operating channel.
- Channel Numbers (1-8): Mostra u canale attualmente sceltu.
- 3.5mm Output Port (FLASH): Connects to flashes or strobes via sync cable.
- Compartimentu di batterie: Contene e batterie AA.
- Interruttore di alimentazione (ON/OFF): Accende o spegne u ricevitore.
- DC Power Port (DC 5V): For external power supply (if applicable, not included).
- Anellu di serratura: Secures the receiver to a hot shoe or light stand.
- Cold Shoe 1/4"-20 Tripod Lug: For mounting on light stands or tripods.
4. Setup
4.1 Installazione di batterie
- Locate the battery compartment on the receiver.
- Aprite a tappa di u compartimentu di a batteria.
- Inserite duie batterie AA, assicurendu a polarità curretta (+/-).
- Chiudere in modu sicuru u coperchiu di u compartimentu di a batteria.
4.2 Connecting to a Flash Unit
The receiver can connect to a flash unit in two ways:
- Via Hot Shoe: Slide your flash unit onto the universal hot shoe of the receiver. Ensure it is securely seated.
- Via Sync Cable: For flashes or studio strobes with a 3.5mm sync port, connect one end of the provided 3.5 to 3.5 mm sync cable to the receiver's 3.5mm Output Port and the other end to your flash/strobe's sync port. For PC sync ports, use the 3.5 mm to PC plug cable.
Image: Steps for connecting a flash to the receiver via hot shoe and sync cable.
4.3 Muntatura di u Ricevitore
The receiver can be mounted on a light stand or tripod using its 1/4"-20 tripod lug, or placed on a flat surface.
4.4 Impostazione di i canali
Ensure the receiver and your AODELAN flash trigger transmitter (sold separately) are set to the same channel (1-8) for proper communication. Use the Channel Adjustment Buttons (CH +/-) on the receiver to select the desired channel.
5. Operating Instructions
5.1 Accensione / spegnimentu
Slide the Power Switch to the "ON" position to turn on the receiver. The Status LED will illuminate. To turn off, slide the switch to "OFF".
5.2 Attivazione di u flash senza filu
Once the receiver is powered on, connected to a flash, and set to the same channel as your transmitter, it is ready to receive trigger signals. When the transmitter sends a signal, the receiver will trigger the connected flash unit. The maximum sync speed is 1/250s.
Image: Multiple receivers in a studio environment, demonstrating multi-flash control.
5.3 Note di compatibilità
The receiver is compatible with most hot shoe flashes, with the exception of Sony flashes that use a proprietary hot shoe design. For Sony cameras with a metal hot shoe, the receiver itself is compatible, but specific Sony flash units may not be directly compatible with the receiver's hot shoe.
6. Mantenimentu
To ensure the longevity and optimal performance of your AODELAN Flash Trigger Receiver:
- Keep the device dry and clean. Avoid exposure to moisture, dust, and extreme temperatures.
- Pulite l'esternu cù un pannu dolce è asciuttu. Ùn aduprate micca prudutti chimichi aggressivi o detergenti abrasivi.
- Eliminate e batterie se u dispusitivu ùn serà micca adupratu per un periodu prolongatu per impedisce perdite.
- Mantene in un locu frescu è seccu luntanu da a luce diretta di u sole.
7. Risoluzione di prublemi
If you encounter issues with your receiver, please refer to the following common problems and solutions:
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| U flash ùn si accende micca | 1. U ricevitore hè off. 2. Low or dead batteries. 3. Incorrect channel. 4. Loose connection to flash. 5. Transmitter not working or out of range. | 1. Turn on the receiver. 2. Rimpiazzà e batterie. 3. Ensure receiver and transmitter are on the same channel. 4. Securely attach flash to hot shoe or sync cable. 5. Check transmitter functionality and reduce distance. |
| Limited range or intermittent triggering | 1. Obstructions between transmitter and receiver. 2. Interferenza elettromagnetica. 3. Batteries low. | 1. Ensure clear line of sight. 2. Move away from sources of interference. 3. Rimpiazzà e batterie. |
| Flash sync issues | Shutter speed exceeds max sync speed. | Ensure camera shutter speed is 1/250s or slower. |
8. Specificazioni
- Mudellu: AODELAN-XXXX
- Dimensioni di u pruduttu: 1.34 x 2 x 3.4 inch
- Pesu di l'articulu: 2.08 once
- Frequenza wireless: 2.4 GHz
- Canali: 8
- Gamma di cumunicazione: Finu à 200 metri (656 piedi)
- Max Sync Speed: 1/250s
- Fonte di energia: 2 x batterie AA (micca incluse)
- Muntaggi compatibili: Universal Hot Shoe (compatible with Canon, Nikon, Sony (metal hot shoe), Olympus, Panasonic, Pentax, Fuji, Samsung)
- Cumpunenti inclusi: Receiver, 3.5 to 3.5mm sync cable, 3.5mm to PC plug cable, 1/4" mono plug socket, Lanyards
Image: Key features and included cables.
9. Garanzia è Support
For warranty information or technical support, please refer to the official AODELAN websitu o cuntattate u vostru rivenditore. Cunservate a vostra ricevuta di compra cum'è prova di compra.
